For a presentation behind thick walls, the key is how the mesh node connects to the rest of the network. If a suitable Ethernet route is available, wired backhaul is an option. Without a cable, a wireless mesh depends on finding a spot with a strong enough connection. Powerline may be an alternative if there’s no Ethernet route or suitable Wi-Fi location, but performance also depends on the sockets you use and any sources of interference.
Which setup could work for you
Presenters working behind solid walls
If the presentation room is a long way from the router, consider how the node connects back to the rest of the mesh. TP-Link describes Ethernet backhaul, while FRITZ! explains how to connect a repeater using LAN bridge mode.
Teams without Ethernet cabling
If you need to connect the nodes wirelessly, you’ll need to place one where it can still receive a good Wi-Fi signal. FRITZ! and the F.A.Z. Kaufkompass both highlight the importance of this backhaul connection.
Households with an existing router
If you want to keep using your existing router, check that it’s compatible with the specific system, and confirm the operating mode and cabling requirements. TP-Link outlines different cabling rules for router and access point modes, while FRITZ! explains how to use LAN bridge mode with a compatible home network.
What to look for when buying
For presentations behind thick walls, start by checking the connection between the nodes. Then consider where you can place them, how to connect your existing devices and what alternatives are available if neither Ethernet nor a reliable Wi-Fi connection is possible.
| Priority |
What to check before buying |
Who it matters most to |
| A stable connection through or around the wall |
Check for a possible cable route, suitable ports and operating mode; confirm in the system interface that backhaul is active. |
If I need the most stable connection possible in the presentation room and a cable route is an option, wired backhaul is my priority. Around 36% of consumers share this main concern. |
| A Wi-Fi location without a network cable |
Check the connection between the nodes at the proposed location, as well as reception in the presentation area. |
If I can’t run Ethernet between the rooms, I need a spot where the node can still connect well to the rest of the mesh. Around 29% of consumers prioritise finding a suitable location for a wireless node. |
| Connecting an existing router |
Check the router model and compatible operating modes, as well as the required ports and cabling rules. |
If I want to keep my existing router, I need to know whether it’s compatible with the mesh system and its operating mode. Around 21% of consumers prioritise connecting their existing network equipment. |
| An alternative if there’s no Ethernet and Wi-Fi is weak |
Check performance at the intended sockets and adapter compatibility; if you have VDSL, monitor the stability of your connection too. |
If neither a cable route nor a good Wi-Fi location is possible, I’d consider a connection over the power lines. Around 14% of consumers say this is their main buying priority. |
Common buying mistakes
-
Placing the extra node in a Wi-Fi dead spot
A wirelessly connected node still needs a good connection to the rest of the mesh. Placing it somewhere that barely gets a signal won’t automatically solve the problem.
Check possible locations between the router and the dead spot before you buy. If Ethernet is available or can be installed, consider using wired backhaul.
Depending on where you place it, you may need another node or a cable connection after all.
-
Assuming every mesh node supports Ethernet backhaul
Ports vary between models. For example, eero notes that the eero Beacon and eero 6 Extender don’t have Ethernet ports.
Check the ports on the exact model you’re considering and make sure they’re suitable for your planned network setup.
-
Assuming Powerline works equally well from every socket
Powerline performance can vary between sockets, and electrical devices can also affect it. According to devolo, interference may occur with some VDSL connections.
Test Powerline using the sockets you plan to use. If you run into problems, check for possible sources of interference and, where relevant, monitor the stability of your VDSL connection.
Brands to consider
TP-Link
Worth considering if you want to choose between wireless and wired backhaul, or between router and access point modes.
- TP-Link explains Ethernet backhaul and how to check it in the Deco app.
- Cabling requirements vary depending on the operating mode. Ethernet backhaul alone doesn’t show how well a particular thick wall will be handled.
FRITZ!
Worth considering if a compatible FRITZ!Box already runs your home network.
- The FRITZ! guide explains how to use a FRITZ!Repeater 2400 as a LAN bridge in a mesh network.
- Check which models and features are compatible with your existing router and other devices.
eero
The manufacturer offers a choice of wireless node connections or Ethernet backhaul, provided the devices have Ethernet ports.
- eero describes Ethernet backhaul as a way to reduce wireless interference between nodes.
- According to eero, the eero Beacon and eero 6 Extender don’t have Ethernet ports, so they can’t be connected using Ethernet.
devolo
Magic with Wi-Fi is a Powerline alternative if there’s no Ethernet route or suitable Wi-Fi location.
- According to devolo, Magic 2 WiFi next uses your power lines and can be expanded with Magic adapters.
- dLAN adapters aren’t supported. devolo also warns that data rates may be low at some sockets and that interference can be an issue.
Mesh systems at Joybuy
This selection includes mesh systems for use across several rooms. If you want to connect the nodes by cable, check that the ports and operating mode on the specific model support Ethernet backhaul.
No image available
TP-Link Deco BE22, 2-pack, Wi-Fi 7
For a mesh setup with two units. Check that the system’s ports and operating mode support the backhaul you want to use.
Dual-band; Gigabit Ethernet.
View at Joybuy
No image available
TP-Link Deco M4, 3-pack, AC1200
Three units are designed for a mesh setup across several rooms. Before buying, check that the ports and operating mode are compatible with your router and planned backhaul.
Dual-band; Gigabit ports.
View at Joybuy
No image available
TP-Link Deco X1500, 2-pack, Wi-Fi 6
For a mesh setup with two units. If you want to connect the nodes using Ethernet, check that the specific device and selected operating mode support backhaul.
Dual-band AX1500; Gigabit ports.
View at Joybuy
No image available
TP-Link Deco S4, 3-pack, AC1200
Three units for a mesh setup across several rooms. The coverage of up to 370 m² mentioned in the product name doesn’t indicate how well the connection will work behind specific thick walls; check the Wi-Fi signal at the intended location.
Dual-band; Gigabit ports.
View at Joybuy
No image available
MERCUSYS Halo H3000X, 2-pack, Wi-Fi 6
Two units for a mesh setup. Check that the specific model supports your preferred connection between nodes and works with your existing network.
Dual-band AX3000; three Gigabit ports per unit; the product name indicates that it’s designed for homes with two to four bedrooms.
View at Joybuy
Frequently asked questions
Where should I place a wirelessly connected mesh node?
Place it somewhere that still gets a good signal from your existing network and can also cover the presentation area. Check both connections at the intended location: good reception next to the node alone doesn’t tell you much about its backhaul. FRITZ! and the F.A.Z. Kaufkompass both stress the importance of a strong wireless connection between the nodes.
Do I need to replace my existing router to use mesh?
Not necessarily. A compatible FRITZ!Repeater can be connected to a FRITZ! mesh using LAN bridge mode, and TP-Link describes an access point mode for Deco. The key things to check are your router model, the selected operating mode and the relevant cabling requirements.
What can I check if Wi-Fi keeps cutting out during an online presentation, even with mesh?
Test the connection in the presentation area and check that the node is using the intended backhaul. For a separate speed test of your internet connection, the Federal Network Agency provides its broadband measurement tool. A speed test result for your connection doesn’t automatically mean you’ll have good Wi-Fi in a distant room.
What should I check about accessories and support before buying?
Check whether your planned setup needs extra mesh nodes, Ethernet cabling or Powerline adapters. Also look up the warranty and support terms for the specific product rather than assuming they’re the same as those for another model from the same brand.