Which solution is right for you?

Homes with LAN between rooms

If you want to listen to music behind thick walls and can use network cables, check whether your mesh system and cabling support Ethernet backhaul. TP-Link explains how to check the connection in the Deco app.

Homes without network cables

Without a LAN connection, your choice depends on whether there’s still a good Wi-Fi signal at the planned node location. If not, you could consider a system that’s explicitly Powerline-compatible, using the intended sockets. devolo notes that electrical devices can cause interference and that some sockets may deliver lower data rates.

Users of local music libraries

If you play music from a computer or NAS, you’ll need to check sharing settings, supported protocols and local network access, as well as Wi-Fi coverage. Sonos lists SMBv2 and SMBv3 as the supported protocols for sharing music from a NAS.

What should you consider when choosing?

Ethernet backhaul

A good choice if: there’s a usable LAN connection between the router or main node and the remote mesh node.

The trade-off: The backhaul uses a cable instead of Wi-Fi, but your cabling, ports and operating mode all need to be suitable.

Wireless mesh

A good choice if: there’s no LAN connection available and the planned location still has a sufficiently strong Wi-Fi signal to the rest of the mesh.

The trade-off: You can place the node wherever it works best, but the backhaul still needs to carry the signal through the wall.

Powerline backhaul

A good choice if: running LAN cables isn’t practical and the wireless backhaul signal isn’t strong enough at the planned location.

The trade-off: The connection runs over your electrical wiring, so check that the models are compatible and test performance at the sockets you plan to use.

Purchase priority What to look for Who is this important for?
Reliable backhaul Check for Ethernet backhaul support and available LAN cabling. Once set up, check which connection type is actually being used. If I want to listen to music behind a thick wall, the node itself needs a suitable connection to the rest of the network. Around 39% of consumers would make the backhaul their top purchase priority.
Access to your music library Check that your devices can be accessed on the intended local network and that your music-sharing setup meets the requirements of your playback system. If I play music from a computer or NAS, I need an accessible shared library and the right permissions. Around 23% of consumers would prioritise local music sharing.
Placing nodes without LAN Check the Wi-Fi signal at the planned location. If using Powerline, check device compatibility and the connection at the sockets you intend to use. If I can’t run a network cable, I need to find a practical location or use a different type of backhaul. Around 23% of consumers would make placement without LAN their top priority.
Integration and setup effort Check your existing router, the right operating mode and how many nodes you’ll need. If using Powerline, also check that the adapters are compatible. If I want to keep using my existing network equipment and avoid unnecessary extra devices, a setup that works with my current system is especially important. Around 15% of consumers would make setup and integration their top purchase priority.

Which mistakes should you avoid?

  • Confusing a good signal at your playback device with a good backhaul

    Your device might connect to the mesh node even when the node itself doesn’t have a strong enough connection to the rest of the network.

    Check the backhaul at the planned location before adding more wireless nodes.

  • Assuming mesh coverage means your music library will work

    Good Wi-Fi coverage won’t set up access permissions or automatically connect separate networks. With Sonos, your device running the app and your Sonos system need to be on the same Wi-Fi network. Guest networks aren’t compatible.

    Test the shared library and check that your playback devices are accessible on your planned home network.

  • Mixing Powerline devices without checking compatibility

    According to TP-Link, Deco PX50 and Deco P7/P9 use different Powerline standards that aren’t compatible with each other. Connection quality can also vary depending on the socket and electrical interference.

    Check the model and Powerline standard, then test the connection at the sockets you plan to use.

Which brands are worth considering?

TP-Link

Deco systems are an option if you’re looking for a dedicated mesh system. Some models also offer Powerline.

  • TP-Link explains how to check Ethernet backhaul for Deco in the app.
  • Powerline isn’t available on every Deco model. PX50 and P7/P9 use incompatible Powerline standards.

FRITZ!

FRITZ!Repeaters and mesh sets are worth considering if you already use a FRITZ!Box.

  • FRITZ! explains how to connect repeaters to a mesh via LAN, including outside the FRITZ!Box’s Wi-Fi range.
  • Before buying, check the specific repeater model, your cabling and your existing router.

ASUS

AiMesh and ZenWiFi are worth considering if you want to manage wired or mixed backhaul connections more precisely.

  • ASUS documents Ethernet backhaul and the option to prioritise a connection for each node.
  • In Ethernet backhaul-only mode, the relevant nodes need to be connected by cable. Supported features also depend on the firmware.

NETGEAR

Orbi systems are another mesh option for rooms further away from your router.

  • NETGEAR lists Ethernet backhaul as an option when the building’s construction affects Wi-Fi reception. Some tri-band systems have a dedicated 5 GHz backhaul band.
  • A dedicated wireless band doesn’t guarantee that a particular wall or other obstacle can be overcome.

devolo

Magic Wi-Fi and Powerline products can use your electrical wiring as a backhaul when LAN and Wi-Fi aren’t practical where you need them.

  • devolo explains how data can be transmitted over electrical wiring and used with mesh Wi-Fi on a shared network.
  • Some sockets may deliver lower data rates, and electrical devices can cause interference. Check the specific model at the location where you plan to use it.

Joybuy products for a LAN-based mesh setup

The mesh sets below are suitable for setups with multiple units and, for the Deco models, may support Ethernet backhaul. Check your cabling and make sure the specific model is suitable for your router and operating mode.

TP-Link Deco BE22, 2-pack, mesh Wi-Fi system

TP-Link Deco BE22, 2-pack

This two-unit set is worth considering for a mesh setup with an existing LAN connection. TP-Link documents Ethernet backhaul support for Deco.

Wi-Fi 7, dual-band, Gigabit Ethernet.

View at Joybuy
TP-Link Deco M4, 3-pack, mesh Wi-Fi system

TP-Link Deco M4, 3-pack

This three-unit set is worth considering if you need several mesh nodes and have a suitable LAN connection for the backhaul.

AC1200, dual-band.

View at Joybuy
TP-Link Deco X1500, 2-pack, mesh Wi-Fi system

TP-Link Deco X1500, 2-pack

This two-unit set is worth considering for a mesh setup with a suitable LAN connection. Check your cabling and how it will fit into your home network before you buy.

Wi-Fi 6, AX1500, dual-band.

View at Joybuy
TP-Link Deco S4, 3-pack, mesh Wi-Fi system

TP-Link Deco S4, 3-pack

This three-unit set is worth considering if you need several mesh nodes. Ethernet backhaul for Deco requires a suitable LAN connection.

AC1200, dual-band.

View at Joybuy
MERCUSYS Halo H1200G, 3-pack, mesh Wi-Fi system

MERCUSYS Halo H1200G, 3-pack

This three-unit set is worth considering for a setup with several mesh nodes. Before you buy, check that your planned backhaul and home network setup are compatible.

AC1200, dual-band.

View at Joybuy

Frequently asked questions

Is an extra wireless node just behind the thick wall enough?

Only if the node still has a sufficiently strong connection to the rest of the mesh from that location. Check the connection where you plan to put it. If there’s already a network cable, you can use Ethernet backhaul instead.

What do I need to set up a music library on a NAS?

The files need to be shared on your local network with the right permissions. Sonos lists SMBv2 or SMBv3 as the protocols for NAS devices. Other playback systems have their own requirements.

Why can’t my Sonos app find the speakers after I switch mesh systems?

First check that the device running the app and your Sonos system are connected to the same Wi-Fi network. According to Sonos, guest networks aren’t compatible. If you’ve changed your Wi-Fi name, password or router, you may also need to update your network details.

Which extra components should I plan for before buying?

Check how many mesh nodes your setup needs and whether you’ll need LAN cables or compatible Powerline adapters. Also make sure your router, operating mode and cabling are compatible with the devices you’ve chosen.

Do I need an individual frequency allocation for a private Wi-Fi mesh in Germany?

For Wi-Fi within the relevant general frequency allocations in Germany, you don’t need an individual allocation just to operate a mesh network. This doesn’t mean you can use any frequency or transmission power: the relevant allocation conditions still apply. The German Federal Network Agency lists generally allocated frequency bands at 2.4 and 5 GHz. For 5945–6425 MHz, Notice 76/2025 applies; it revoked the previous Notice 12/2025.