Archive users on multiple floors
You need Wi-Fi where you actually work, not just near the router. Ceilings and walls can weaken the signal, as F.A.Z. Kaufkompass and devolo also point out.
If there are network cables between floors, suitably positioned Wi-Fi units can use Ethernet backhaul to carry the connection over cable rather than relying solely on the signal passing through floors. If there are no cables, a wireless mesh may be an option, provided the units have a good connection to one another where they’ll actually be installed. Also check how the existing router will be integrated, and keep guest network access separate from archive permissions.
You need Wi-Fi where you actually work, not just near the router. Ceilings and walls can weaken the signal, as F.A.Z. Kaufkompass and devolo also point out.
You need to decide whether visitors’ devices should use a separate guest network. Germany’s Federal Office for Information Security explains that a properly configured guest network is separate from the internal network.
You want to improve coverage across floors without replacing the internet router unnecessarily. FRITZ! also says the Mesh Set 2700 can be used with another router; still, check the appropriate operating mode for the specific system.
First check whether there are floor-to-floor cables for the backhaul. Then plan the mesh units, network access and how to integrate the existing router.
| Buying criterion | What to check | Who it matters most to |
|---|---|---|
| Wi-Fi in the archive areas | Check the locations on every floor where coverage is needed, as well as the signal between units and at your workstation. | If I work in archive areas on several floors, I need coverage there, not just beside the router. Around 36% of consumers put coverage across floors first. |
| Backhaul between floors | Check for LAN sockets on each floor, Ethernet backhaul and the cabling requirements of the intended operating mode. | If archive access needs to remain reliable even when ceilings make it harder for the signal to pass through, the connection between the units matters to me. Around 29% of consumers prioritise backhaul between floors. |
| Separating archive and guest access | Set up a guest network and check that the archive really is inaccessible from it. Also check access permissions on the archive system. | If visitors are given Wi-Fi access, they shouldn’t automatically be able to access internal archive data. Around 21% of consumers prioritise keeping access separate. |
| Router and management | Check the operating mode, the devices needed for management and how to install firmware updates in advance. | If the club’s existing router is staying, I want to know how to integrate the mesh and manage it when responsibility changes hands. Around 14% of consumers put integration and management first. |
A claimed coverage area is no substitute for checking the signal where you use the archive. Building materials, obstacles and the position of the units all affect reception.
Start by planning the work areas you need to cover and the backhaul. Then choose the number of units and where to place them.
With a wireless mesh, even a unit further away needs a usable connection to the rest of the system.
Check the backhaul at the planned location, and consider using existing LAN sockets instead.
Using one Wi-Fi name doesn’t determine who can read archive files.
If visitors need access, set up a guest network and check the permissions as well as whether the archive can actually be reached.
Powerline uses electrical wiring, while Ethernet backhaul uses a network cable. That doesn’t mean both approaches will perform equally well in your club building.
Check what cabling is already in place, and test any solution that uses the electrical wiring where you plan to use it.
Depending on the cable routes, you may need additional adapters or have to install network cables.
The FRITZ!Mesh Set 2700 is worth considering if you want to keep your existing router.
Deco systems such as the X50 offer optional Ethernet backhaul; the operating mode matters when integrating the system.
The ZenWiFi XD5 may suit a multi-unit installation using existing network sockets.
The WiFi 7 Mesh BE6500 and Magic 2 WiFi 6 next represent different approaches: mesh with wired connections, and Powerline respectively.
According to Huawei, the WiFi Mesh X3 Pro is designed to work with a main unit and additional units, and is also suitable for multi-storey homes.
The mesh kits below are options if you want to extend Wi-Fi to several areas of your archive. Before buying, check that the specific wireless device is the version intended for Germany and that the relevant conformity documents are available. According to the German Federal Network Agency, devices covered by EU harmonisation legislation and placed on the EU market must carry the CE marking.
No image available
A 2-pack may be suitable if the two units can be installed where you plan to place them; check how they’ll integrate with your existing network.
Wi-Fi 7, dual-band, Gigabit Ethernet and white.
No image available
A 3-pack may suit your plans if you can place three units in suitable locations; check the backhaul connection for each one.
AC1200, dual-band and Gigabit ports. According to the product description, setup is via the app and requires an account.
No image available
This 3-pack may work for a plan involving three units; decide in advance where they’ll go and how they’ll connect.
AC1200, dual-band and Gigabit ports. According to the product description, setup and management are through the Deco app.
No image available
If two units suit the archive areas you have in mind, check reception at both locations and make sure the backhaul is adequate.
Wi-Fi 6 AX3000, dual-band, three Gigabit ports per unit, MU-MIMO and WPA3. According to the product description, setup and management are through the MERCUSYS app.
No image available
A 2-pack may suit two planned locations; check in advance that the backhaul will be strong enough there.
Wi-Fi 7 BE3600, dual-band and three Gigabit ports per unit. According to the product description, setup and management are through the MERCUSYS app.
Plan around the archive areas and the backhaul. With a wireless mesh, every unit further away needs a good connection of its own. If you have cables between floors, suitable units can use Ethernet backhaul. No set number of units guarantees coverage through your building’s ceilings.
Yes, if the system you choose can run with it in the right mode. FRITZ! specifically says the Mesh Set 2700 can also be used with other routers; with Deco, the permitted cabling depends on whether you use router or access point mode.
No. Network access and file permissions need to be considered separately. A properly configured guest network separates network access, but you’ll also need to check on the archive system who is allowed to open its files. Test whether the archive can actually be reached from the guest network, too.
Keep your router’s firmware up to date, as recommended by Germany’s Federal Office for Information Security. Management methods and account requirements vary by model; TP-Link says Deco requires a TP-Link ID and is managed through the mobile app.
According to the German Federal Network Agency, devices covered by EU harmonisation legislation and placed on the EU market must carry the CE marking. Check that the product you’re considering is the version intended for Germany and that the relevant conformity documents are available. The CE marking is not an independent performance test by the German Federal Network Agency.