Who might be interested in mesh Wi-Fi?

Portfolio creators with large uploads

If you regularly transfer large work files, first work out whether your internet connection or the link between your workspace and router is limiting your upload speed. Germany’s Federal Network Agency provides a broadband measurement tool to compare your actual connection speed with the rate agreed in your contract.

Households with a hard-to-reach floor

If your workspace is behind ceilings or walls, what matters is whether a reliable connection between floors is possible. Deloitte Germany identifies building features such as thick walls and poorly positioned routers as possible causes of poor indoor Wi-Fi reception.

Users with an existing router

If you want to keep your existing router setup, first check the exact model and whether it supports mesh. Telekom gives the Speedport Smart 4 as an example of a compatible router; FRITZ! notes that a repeater needs to be connected to a suitable FRITZ!Box.

What should you look for when buying?

First work out whether your internet connection or home network is the bottleneck, then choose the right backhaul and router solution.

Buying priority What to look for Who is this particularly important for?
Reliable uploads Compare your connection’s upload speed with the performance at your workspace; don’t rely solely on the advertised combined Wi-Fi speed. If I regularly upload large portfolio files, I want to know whether my internet connection or home network is limiting the transfer. Around 36% of consumers put reliable uploads first.
Backhaul between floors Check for existing network cables and possible locations for wireless units; test Powerline at the sockets you plan to use. If my workspace is on a hard-to-reach floor, I need a connection that works between the units too. Around 29% of consumers pay particular attention to a reliable backhaul between floors.
Router compatibility Make a note of your router model and firmware, then check the intended mesh setup or operating mode. If I want to keep my existing router, I want a suitable extension rather than an unnecessary system change. Around 21% of consumers prioritise compatibility with their existing router setup.
Cost and usability Compare the number of units included and whether you might need additional units or cabling; check optional services separately. If I want to cover multiple floors, I want to assess the cost and effort of the complete system rather than looking at just one node. Around 14% of consumers prioritise the total cost and long-term usability.

Avoiding common buying pitfalls

  • Confusing combined Wi-Fi speed with upload speed

    The advertised wireless speed doesn’t automatically tell you how quickly you can upload a file over your internet connection. Consider your internet connection and local network link separately.

    Compare your connection’s upload speed with the link at your workspace before choosing another mesh system just because it has a higher Wi-Fi speed rating.

    An unnecessary system change can mean extra setup work without fixing a limitation in your connection’s upload speed.

  • Placing a wireless unit right in a Wi-Fi dead zone

    The mesh unit needs a sufficiently strong backhaul too. A unit at the very edge of the reception area won’t automatically improve the connection.

    Try a midway position; consider using existing LAN cabling or test Powerline if the wireless link isn’t strong enough.

    Depending on the result, you may need another node or a different type of connection.

  • Assuming routers and repeaters from the same brand are automatically compatible

    Telekom distinguishes mesh-capable Speedport models from the Speedport Smart and Smart 2, which Telekom says are not mesh bases in their own right.

    Check the full model name, firmware and intended operating mode.

    An unsuitable router base may mean you need to replace it or carry out additional setup.

  • Assuming the Powerline rating applies to every socket

    devolo notes that transfer speeds can be low at individual sockets and may be affected by electrical appliances.

    Test the kit using the wall sockets you actually plan to use, and compare performance at the intended locations.

    If transfer speeds are low, you may need to troubleshoot further or use a different type of connection.

Relevant brands to consider

FRITZ!

FRITZ!Repeaters are an option for extending a suitable FRITZ!Box setup. FRITZ! lists triband wireless and two Gigabit LAN ports for the FRITZ!Repeater 3000 AX.

  • According to FRITZ!, the repeater can connect via Wi-Fi or LAN.
  • Mesh integration requires a suitable FRITZ!Box and FRITZ!OS 7 or later. The advertised wireless speed isn’t a measurement of a portfolio upload.

TP-Link

Deco X50 is a standalone Wi-Fi 6 mesh system. TP-Link describes wireless connections and optional Ethernet backhaul between units.

  • TP-Link lists three Gigabit ports on each Deco X50 unit.
  • The stated coverage area doesn’t show how ceilings, unit locations and upload speeds will affect performance at your specific workspace.

devolo

Magic 2 WiFi 6 next combines mesh Wi-Fi with Powerline and is available as a starter or multiroom kit.

  • Powerline may be an option if there isn’t a suitable LAN cable between floors.
  • devolo notes that transfer speeds may be low at individual sockets and that electrical appliances can cause interference. According to the manufacturer, older dLAN adapters aren’t compatible with the Magic range.

ASUS

ASUS describes the ZenWiFi BT8 as a triband Wi-Fi 7 model with 6 GHz wireless and wired backhaul options.

  • ASUS lists two 2.5-Gigabit Ethernet ports on the BT8.
  • Advertised wireless speeds and coverage areas aren’t measurements taken in a multi-storey building. Check whether 6 GHz and the extra features are useful for your needs.

Telekom

Speed Home WLAN is worth considering as an extension for selected mesh-capable Speedport routers.

  • Telekom gives the Speedport Smart 4 as an example of a compatible router.
  • Telekom says the Speedport Smart and Smart 2 aren’t mesh bases in their own right. Check your router model and firmware before buying.

Joybuy products

The products below include mesh systems and a single access point for a compatible UniFi network. Compare the number of units included, connection options and the requirements of your existing router or network setup.

TP-Link Deco BE22 (2-pack) mesh Wi-Fi 7 system

TP-Link Deco BE22 (2-pack) mesh Wi-Fi 7 system

This two-unit pack is worth considering if you’re comparing mesh systems with two units and want to connect wired devices.

Wi-Fi 7, dual-band and two Gigabit WAN/LAN ports per unit are listed.

The port specification alone doesn’t guarantee a particular upload speed at your workspace.

View at Joybuy
TP-Link Deco M4 (3-pack) AC1200 mesh Wi-Fi system

TP-Link Deco M4 (3-pack) AC1200 mesh Wi-Fi system

This three-unit pack is worth considering if you’re looking at mesh systems with three units; first check which operating mode suits your router setup.

Two Gigabit Ethernet ports per unit are listed. Router and access point modes are also listed.

View at Joybuy
TP-Link Deco S4 (3-pack) AC1200 mesh Wi-Fi system

TP-Link Deco S4 (3-pack) AC1200 mesh Wi-Fi system

This three-unit pack is an option to compare if you need several mesh units and Gigabit connections.

Dual-band and Gigabit Ethernet ports per unit are listed.

The product specifications don’t include a measurement of upload speeds across multiple floors.

View at Joybuy
MERCUSYS Halo H25BE (2-pack) Wi-Fi 7 mesh set

MERCUSYS Halo H25BE (2-pack) Wi-Fi 7 mesh set

This two-unit pack may appeal to anyone comparing Wi-Fi 7 mesh systems with several Gigabit ports.

Dual-band Wi-Fi 7 and three Gigabit ports per unit are listed.

The product specifications don’t indicate performance for a specific layout or upload.

View at Joybuy
Ubiquiti UniFi U6 Mesh Wi-Fi 6 access point for indoor and outdoor use

Ubiquiti UniFi U6 Mesh Wi-Fi 6 access point for indoor and outdoor use

This single access point is worth considering if you already have a compatible UniFi network and are looking to add another access point.

Six spatial streams, one Gigabit Ethernet port and a PoE adapter are listed.

This listing is for one device, not a multi-unit pack; a compatible UniFi network is required for mesh.

View at Joybuy

Frequently asked questions

Will faster mesh automatically make a large portfolio upload faster?

No. First measure your internet connection’s upload speed and compare it with the connection at your workspace. Mesh can help address a local bottleneck, but it can’t make your internet connection faster than its available upload capacity.

Where should I place a mesh unit on the next floor?

With wireless backhaul, place the unit where the connection to the previous one is still strong enough, rather than right at the edge of the Wi-Fi dead zone. With suitable LAN backhaul, its position depends less on the wireless connection to the router; still check reception at your workspace.

What should I check after installing Powerline?

Test the connection at the sockets you plan to use. devolo recommends plugging its adapters directly into wall sockets where possible, and identifies power supplies and dimmers as possible sources of interference. This guidance doesn’t guarantee a particular performance in your home.

Do I need to replace my Speedport to add mesh?

Not necessarily. Telekom gives the Speedport Smart 4 as a compatible example; according to Telekom, the Speedport Smart and Smart 2 aren’t mesh bases in their own right. The exact model and compatible firmware are what matter.

What additional costs and effort should I allow for with a mesh system?

Check how many units you’ll need for your planned locations and whether additional cabling or nodes might be required. Also take optional services into account and compare complete kits rather than just one device.