First, check whether the videos are shared over your home network or through a cloud service, and identify where the connection is weak. If there are Ethernet cables between floors, wired mesh nodes or access points can avoid a wireless connection between nodes. Without Ethernet, consider well-placed wireless nodes or powerline adapters with Wi-Fi, provided the electrical wiring at the location is suitable. There’s no need to replace a working router automatically.
Who is this solution for?
Families with Wi-Fi dead spots on multiple floors
If you want to watch or share videos on different floors, reception where you use your devices and the connection between nodes both matter. The Federal Office for Information Security highlights potential Wi-Fi coverage problems in multi-storey buildings.
Households with a local video collection
If you transfer family videos between computers, a home server or TVs, consider the entire connection between the source and the playback device. TP-Link lists wired backhaul as an option for the Deco BE25; its suitability depends on whether you have the right cabling in place.
Households with an existing router
If you want to keep using your internet connection and existing router, check the connection type, operating mode and how the devices work together. FRITZ! describes the LAN bridge mode of the FRITZ!Repeater 3000 AX for use with a FRITZ!Box under the software conditions specified.
What should you consider when buying?
If you want to share family videos across multiple floors, start by identifying the actual route the data takes, then choose the right way to extend your home network.
| What matters |
What to check when buying |
Who is this important to? |
| Coverage where you use your devices |
Check reception on the relevant floors and at the planned node locations; don’t assume advertised coverage figures are a measurement of your own home. |
If I want to watch videos on several floors, reception at the device and the connection between nodes matter to me. Around 36% of consumers put multi-floor coverage first. |
| Reliable video transfers |
Find out whether the videos are stored locally or in the cloud, then test the route between the source and playback device at the location where you want to use it. |
If I transfer family videos between devices or from a local collection, I want to consider the entire data route. Around 29% of consumers prioritise reliable video transfers. |
| Connecting your existing router |
Check that the router model, connection type and the router or access point mode you want are compatible with the specific system. |
If I want my router to keep providing my internet connection, I want to check in advance whether the additional system can be integrated appropriately. Around 21% of consumers put integration with their existing home network first. |
| Set-up and ongoing costs |
Check how many nodes and power sockets you’ll need, as well as the terms of any optional services. |
If I want to avoid extra set-up work and ongoing costs, I check in advance which features I actually need. Around 14% of consumers prioritise effort and potential ongoing costs. |
Avoid common misconceptions
-
Confusing the advertised maximum Wi-Fi speed with actual file transfer speeds
An advertised wireless speed doesn’t tell you how quickly a video file will actually transfer across several floors. The source, the connection between nodes and the playback device all affect the data route too.
Check the source, destination and connection where you’ll use the system, and test a typical transfer. TP-Link’s BE25 manual notes that actual wireless throughput and coverage are not guaranteed.
-
Assuming wireless mesh or powerline will work reliably in every building
With wireless mesh, the connection between nodes needs to work too. With powerline, individual sockets and sources of electrical interference can affect data transfer.
Check your planned locations for wireless nodes, or test powerline adapters in the sockets where you intend to use them. devolo recommends plugging its adapters directly into a wall socket rather than using a multi-socket extension or extension lead.
Depending on your set-up, you may need additional nodes, cables or a different way to connect.
-
Buying a mesh system as a direct replacement without checking your existing router
Router, access point and LAN bridge features depend on the product and how it is connected. The documented LAN bridge mode of the FRITZ!Repeater 3000 AX applies to use with a FRITZ!Box under the software conditions specified by FRITZ!.
Before buying, decide which device will handle your internet connection and whether the new system should work alongside or replace your router.
Set-up may take extra work if the operating mode and your existing devices aren’t compatible.
-
Assuming optional services are included indefinitely
NETGEAR describes an optional Armor service for the Orbi RBE773, with a trial period followed by a paid subscription.
Check the terms of optional services and how they renew separately from what’s included with the device.
An optional service may incur ongoing costs after the trial period.
Key brands to consider
The product ranges listed here offer different ways to connect. Their technical specifications are no substitute for checking your own network route, device compatibility and intended use.
TP-Link
The Deco BE25 is a dual-band mesh system with Wi-Fi 7 and an option for wired backhaul.
- TP-Link lists two 2.5 Gbit/s ports per Deco BE25 unit.
- This port specification doesn’t guarantee a particular video transfer speed through the floors of a specific home. The BE25 is also a different product from the BE25-5G and BE25-Outdoor.
FRITZ!
The FRITZ!Mesh Set 4200 with FRITZ!Repeater 3000 AX is one way to extend a home network with multiple nodes.
- FRITZ! lists three 3000 AX repeaters and tri-band Wi-Fi 6 for the three-unit set.
- The documented set-up as a LAN bridge applies to use with a FRITZ!Box running FRITZ!OS 7 or later; this doesn’t mean it will work in the same way with every other router.
ASUS
The ZenWiFi BT8 is a tri-band system with 6 GHz support, plus router and access point modes.
- ASUS lists ports for wired backhaul on the BT8.
- Advertised wireless speeds are theoretical. ASUS notes that specifications may vary by country and package.
devolo
The Magic 2 WiFi 6 next Multiroom Kit combines powerline and Wi-Fi. It may be an alternative if you don’t have Ethernet cabling or a reliable wireless connection.
- According to devolo, the kit includes one LAN adapter and two Wi-Fi adapters.
- devolo notes that transfer speeds may be low at some sockets and that electrical devices can cause interference. Check whether your wiring is suitable where you plan to use it; according to devolo, Magic adapters are not compatible with older dLAN adapters.
NETGEAR
The Orbi 770 range is a tri-band mesh system with a router and satellites for multi-node installations.
- NETGEAR lists wired backhaul as an option for the RBE773.
- Coverage and speed figures are manufacturer specifications. The optional Armor service may become chargeable after its trial period.
Joybuy product options
These product options include mesh systems for multiple areas, as well as individual access points for existing network cabling. For the specific version offered in Germany, also check that it has the required CE marking and German-language instructions for use and safety information; the Federal Network Agency includes these points in its market surveillance.
No image available
TP-Link Deco M4, AC1200 dual-band mesh Wi-Fi system (3-pack)
For households looking to connect several rooms through one mesh network while continuing to use an existing router.
Three units; dual-band AC1200; two Gigabit Ethernet ports per unit. Router and access point modes are specified.
View at Joybuy
No image available
TP-Link Deco S4, AC1200 mesh Wi-Fi system (3-pack)
A mesh system for several areas of your home; the product description says it can be used with an existing modem or router.
Three units; dual-band AC1200; two Gigabit Ethernet ports per unit. A single network name with automatic switching between nodes is specified.
View at Joybuy
No image available
MERCUSYS Halo H25BE, Wi-Fi 7 BE3600 dual-band mesh Wi-Fi system (2-pack)
For two areas where you use your devices, provided you can place the second unit within range of the first.
Two units; three Gigabit ports per unit. The description lists MU-MIMO and WAN/LAN auto-sensing Gigabit ports.
View at Joybuy
No image available
Ubiquiti UniFi U6 Mesh Wi-Fi 6 indoor/outdoor access point
For a location with an Ethernet connection where you want to use a single access point. The description says mesh operation requires a UniFi network.
Dual-band Wi-Fi 6; Gigabit Ethernet; a PoE adapter is listed. This is a single access point, not a multi-node set.
View at Joybuy
No image available
Ubiquiti UniFi U7 Pro XG Wi-Fi 7 access point, tri-band, 10GbE
For a location with network cabling where you want to install a single access point with a wired uplink. The description lists wireless mesh operation.
Tri-band Wi-Fi 7; 10 GbE RJ45 uplink. A compatible PoE+ switch or PoE+ injector is required and, according to the description, is not included. UniFi Network version 9.0.114 or later is specified.
View at Joybuy
Frequently asked questions
Do I mainly need to upgrade my internet speed to share family videos at home?
Not necessarily. First, find out whether the videos are coming from your home network or the cloud, then check the entire route to the playback device. The Federal Office for Information Security describes the router as the connection point between devices on your home network and the internet.
Where should I place additional mesh nodes?
With wireless mesh, check reception at the TV or computer as well as the connection between the additional node and the rest of your network. If you have suitable Ethernet cabling, a compatible system can use a wired connection between nodes.
What should I test before installing powerline permanently?
Test the adapters in the wall sockets where you actually plan to use them. devolo notes that transfer speeds may be low at some sockets and that power supplies or dimmers can cause interference. It recommends plugging adapters into a wall socket rather than using a multi-socket extension or extension lead.
Can I keep using my existing router with a mesh system?
That depends on the system, the operating mode you want and your router. Check compatibility and the connection type for your specific set-up before buying; the LAN bridge mode documented by FRITZ! for the FRITZ!Repeater 3000 AX applies to use with a FRITZ!Box under the software conditions specified.
What should I look for in a Wi-Fi device for the German market?
Check that the specific version on offer has the required CE marking and German-language instructions for use and safety information. The Federal Network Agency includes these points in its market surveillance; a similar model name alone doesn’t confirm the features of the version actually being offered.