Who can benefit from mesh Wi-Fi across multiple floors?

Learners with Wi-Fi dead spots on other floors

If the Wi-Fi barely reaches the places where you usually study, make sure you can position the mesh nodes somewhere they’ll still have a good connection to the main unit or another node. FRITZ! explains how an additional device can extend an existing Wi-Fi network.

Learners with network cables between floors

If Ethernet sockets are already available, check whether you can use them to connect your mesh nodes. TP-Link lists Ethernet backhaul as an option for the Deco X50, and ASUS describes this option for the ZenWiFi XD5.

Learners with an existing mesh system

If you want to keep using your router, first check whether your specific device can be extended in a compatible way. FRITZ! explains how the Mesh Set 2700 can also be used with routers from other providers; Telekom explains how to connect Speed Home WLAN to a mesh-capable main unit.

Which buying criteria matter for downloading course materials?

First, work out where you can place the nodes and whether there’s a cable route between floors. Then decide whether you want to keep using your existing router and how many additional devices your setup actually needs.

Concern What to check before buying Who is it most relevant to?
Wi-Fi where you study Check the connection at the planned node location; a device placed in the middle of a dead spot still needs a good connection to the main unit. If I need Wi-Fi where I study on several floors, finding a suitable spot for each node matters most to me; around 36% of consumers put this concern first.
Reliable course downloads Check your broadband speed and Wi-Fi connection separately at your study space. The Federal Network Agency’s broadband measurement tool compares your actual broadband speed with the speed specified in your contract. If I want to download large course files, I check whether my broadband connection and the connection in my room are up to the job; around 29% of consumers prioritise connection stability.
Connecting your existing router Check your router model and the supported operating mode. Telekom points out that Speed Home WLAN can also be set up as a repeater without mesh. If I want to keep my router and extend coverage in just a few areas, I check that it can be integrated with my mesh system; around 21% of consumers give this concern priority.
Number of devices and ongoing running costs Work out how many nodes you need and factor in their power consumption. The consumer advice centre recommends checking consumption with an electricity meter. If I’d need to run additional devices permanently, I factor in both the purchase price and electricity consumption; around 14% of consumers consider the overall cost a priority.

Which mistakes should you avoid when buying mesh Wi-Fi?

  • Confusing the advertised Wi-Fi data rate with download speed

    A model’s stated wireless data rate doesn’t tell you how fast your broadband connection is or what speed you’ll get where you study.

    First check your broadband connection, then check the connection where you study. The Federal Network Agency provides a broadband measurement tool to compare your actual broadband speed with the speed specified in your contract.

  • Placing a wireless node directly in a Wi-Fi dead spot

    The additional node also needs a usable connection back to the main unit or the next node.

    Test the planned location and check the connection indicator, if your device has one. If you already have cabling, check whether LAN backhaul could work for your setup.

    If you can’t find a location with a usable wireless connection, you may need another node.

  • Assuming Wi-Fi 7 automatically gives you three usable frequency bands at once

    devolo describes the WiFi 7 Mesh BE6500 as a dual-band device, with a choice of 2.4 plus 5 GHz or 2.4 plus 6 GHz.

    Check the frequency bands supported by the specific model and whether your devices support the band that matters for your setup.

Which brands are worth considering?

FRITZ!

The FRITZ!Mesh Set 2700 is an option for extending an existing network. According to FRITZ!, it can connect to your router over Wi-Fi or LAN.

  • FRITZ! offers two- and three-unit sets and says they can also be used with routers from other providers.
  • connect notes that the tested Set 2700 lacks 6 GHz support. This limitation applies to this set, not the brand as a whole.

TP-Link

The Deco X50 is an expandable mesh system with Wi-Fi 6 and optional Ethernet backhaul.

  • TP-Link lists three Gigabit ports on each Deco X50 and guided app-based setup.
  • The coverage and speed figures quoted by the manufacturer aren’t measurements for your home or study space.

ASUS

ZenWiFi XD5 is a mesh option for households that want to make use of existing Ethernet sockets.

  • ASUS describes Ethernet backhaul and AiMesh support; the specifications list Gigabit connections.
  • The Wi-Fi speeds quoted by the manufacturer are theoretical figures for the model, not guaranteed download speeds.

devolo

According to the manufacturer, the WiFi 7 Mesh BE6500 is available as a two- or three-unit set, as well as for expanding an existing setup.

  • devolo lists one 2.5-Gbit/s port and three Gigabit ports on the BE6500.
  • According to the manufacturer, the device uses dual-band radio: 2.4 plus 5 GHz or 2.4 plus 6 GHz. Here, Wi-Fi 7 doesn’t mean that 5 and 6 GHz are available at the same time as three bands.

Telekom

Speed Home WLAN may be a useful way to extend your coverage if it’s compatible with your existing router setup.

  • Telekom explains how to connect it to a mesh-capable main unit.
  • After setup, Telekom distinguishes between mesh mode and standard repeater mode. Check compatibility with your specific router.

Which mesh products are available at Joybuy?

This selection includes multi-device mesh sets as well as individual devices for extending a network or acting as an access point. If you’re considering a single device, check whether you already have a compatible system or the necessary network equipment.

TP-Link Deco M4 mesh Wi-Fi system, AC1200, 3-pack

TP-Link Deco M4, AC1200, 3-pack

This three-unit set is designed for use across multiple rooms.

The product description lists two Gigabit ports per unit and automatic signal switching. Check the connection at your planned locations rather than assuming a general coverage figure reflects reception in your home.

Joybuy
MERCUSYS Halo H1200G mesh Wi-Fi system, AC1200, 3-pack

MERCUSYS Halo H1200G, AC1200, 3-pack

This three-unit set is designed for use across multiple floors and rooms; the actual connection also depends on where you place the nodes.

The product description lists two Ethernet ports per unit, app-based setup and automatic roaming.

Joybuy
MERCUSYS Halo H25BE mesh Wi-Fi set, Wi-Fi 7 BE3600, 2-pack

MERCUSYS Halo H25BE, Wi-Fi 7 BE3600, 2-pack

This two-unit set could be a good fit if two mesh units suit your setup.

The product description lists Wi-Fi 7, dual-band connectivity and three Gigabit ports per unit. Check that the number of units and connection options are sufficient for your floors.

Joybuy
TP-Link Deco X10, Wi-Fi 6 AX1500, single unit for extending a network

TP-Link Deco X10, Wi-Fi 6 AX1500, single unit

This single device is designed to extend an existing Deco mesh network; it isn’t a multi-device set.

The product description lists two Gigabit ports. Before buying, check that you already have a compatible Deco network.

Joybuy
Ubiquiti U7 Mesh, Wi-Fi 7, Power over Ethernet

Ubiquiti U7 Mesh, Wi-Fi 7, PoE

The U7 Mesh is described as a single access point, not a multi-device mesh set.

For the described setup, PoE and management through UniFi Network are required. The product specifications also list a 2.5-Gigabit Ethernet uplink; check that you already have the necessary infrastructure.

Joybuy

Frequently asked questions about mesh Wi-Fi across multiple floors

How can I tell whether my broadband connection or Wi-Fi is slowing down my downloads?

First check the speed of your broadband connection, then compare it with the connection where you study. The Federal Network Agency’s broadband measurement tool compares your actual broadband speed with the speed specified in your contract, but it doesn’t confirm Wi-Fi coverage on every floor.

Where should I place a wirelessly connected mesh node?

Don’t put it at the very edge of a Wi-Fi dead spot: the node itself needs a good connection to the main unit or the next node. Check the connection indicator, if available, then test the connection again where you study.

How can I tell whether Speed Home WLAN is actually working as part of a mesh system?

According to Telekom, a yellow LED after setup indicates repeater mode without mesh. Check the requirements and status of your specific router rather than assuming that a successful Wi-Fi connection means it’s operating as part of a mesh system.

What are the ongoing costs of additional nodes?

Additional devices left on permanently use electricity. Check the power consumption of the devices you choose and calculate the cost using your own electricity tariff; the consumer advice centre recommends measuring consumption with an electricity meter.

What requirements apply to mesh Wi-Fi devices sold in Germany?

The Federal Network Agency lists requirements for radio equipment on sale, including correct CE marking, clear device identification, a German instruction manual for non-professional users and an EU-based economic operator responsible for the product. A general product description doesn’t confirm that a particular offer meets all these requirements.