Who is mesh Wi-Fi for?

Learners dealing with Wi-Fi dead zones

If you stream language lessons in rooms on different floors, dropouts can be particularly frustrating. Ceilings and walls can affect both the connection to your device and the wireless link between mesh units.

Homes with Ethernet between floors

Existing network cables can provide the backhaul between units. Check whether the system in question supports Ethernet backhaul and has the ports you need.

Homes with an existing router

If you want to keep using your router, check how the mesh system connects to it and which operating mode works with your existing network equipment before you buy.

What should you look for when buying?

The key is to work out which part of the connection is interrupting your lesson: the wireless signal through the ceiling, the position of the units, the router setup or the planned expansion.

What matters What to look for when buying Who it matters most to
Reliable backhaul Check the wireless connection at the intended location or, if you have cabling, look for Ethernet backhaul and the ports you need. If I want to avoid dropouts during lessons, the connection between the units needs to be stable too. Around 36% of consumers say this backhaul connection matters most to them.
Coverage across floors Plan where to place the units for the rooms you use and compare the number of units in the specific kit. If you want to study on several floors, you need a connection that reaches the rooms you actually use – not just a suitable coverage figure. Around 29% of consumers prioritise coverage.
Router setup Check your router model, how the first node connects, the operating mode and compatibility with any existing mesh devices. If I want to keep using my existing network equipment, I want to know in advance how the new system will work with it. Around 21% of consumers prioritise this.
Scope of the setup Compare the included units and ports; if you’re using Powerline, test the wall sockets you intend to use. When there are several floors, I want to know which additional units or adapters I’ll need, and how they’ll connect. Around 14% of consumers put this effort first.

Common buying mistakes

  • Assuming the advertised Wi-Fi speed guarantees a connection between floors

    Ceilings and walls can affect the wireless signal. The mesh units themselves also need a reliable connection to one another.

    Check the backhaul at the locations you plan to use. If suitable cabling is available, consider Ethernet backhaul.

  • Choosing a single-unit kit for multiple floors

    The number of units affects where you can place them in your mesh network. A single unit won’t automatically cover several floors.

    Compare what’s included with the rooms you want to reach, and check that the units can connect from suitable locations.

  • Assuming Powerline will work from any socket

    Interference at individual sockets can affect the connection over your mains wiring. devolo also points out that Magic adapters aren’t compatible with existing dLAN adapters in a Powerline network.

    Test the wall sockets you intend to use and, before expanding your setup, check that the adapters are from the same product range.

Key brands and product ranges

TP-Link

Deco X50 and Deco BE25 are different mesh product ranges. According to TP-Link, the X50 supports additional Deco units and optional Ethernet backhaul; the BE25 is a dual-band Wi-Fi 7 alternative.

  • TP-Link lists two 2.5 Gbit/s ports per unit for the Deco BE25.
  • Wireless data rates and advertised coverage won’t tell you how well the signal will travel through the ceilings in your home.

FRITZ!

According to FRITZ!, the FRITZ!Mesh Set 4200 (2-pack) includes two FRITZ!Repeater 3000 AX units and can be integrated into a home network, depending on your existing equipment.

  • FRITZ! describes the kit as a tri-band Wi-Fi 6 system and lists regular updates and a five-year warranty.
  • Check whether two units in suitable locations will be enough for your floors and which connection method will work with your router.

ASUS

ZenWiFi XD5 is a mesh product range that, according to ASUS, can use Ethernet backhaul when suitable network ports are available.

  • ASUS also describes using it with AiMesh.
  • Ethernet backhaul requires cabling that’s actually usable; using AiMesh with an existing router depends on it being compatible.

devolo

Magic 2 WiFi 6 next combines Powerline with mesh Wi-Fi. It may be worth considering if you don’t have an Ethernet cable and the wireless signal between floors is poor.

  • According to devolo, the Multiroom Kit includes three adapters for multiple floors.
  • The connection depends on your mains wiring and potential sources of interference. According to devolo, Magic adapters aren’t compatible with existing dLAN adapters in a Powerline network.

Mesh Wi-Fi products at Joybuy

This selection includes mesh kits for a home network spanning several rooms and floors. How well the connection works in your home depends, among other things, on unit placement and the backhaul.

TP-Link Deco BE22 (2-pack), mesh Wi-Fi system with Wi-Fi 7

TP-Link Deco BE22 (2-pack), Wi-Fi 7, dual-band

Could be worth considering if you’re looking for a two-unit mesh kit for several rooms; check the connection at the locations you plan to use.

Wi-Fi 7; dual-band; Gigabit Ethernet; two units.

View at Joybuy
TP-Link Deco M4 (3-pack), AC1200 mesh Wi-Fi system with Gigabit ports

TP-Link Deco M4 (3-pack), AC1200, dual-band

Could be a good fit if you’re considering a three-unit mesh kit for several rooms; plan the positions so the units stay connected.

AC1200; dual-band; Gigabit ports; three units.

View at Joybuy
TP-Link Deco S4 (3-pack), AC1200 mesh Wi-Fi system with Gigabit ports

TP-Link Deco S4 (3-pack), AC1200, dual-band

Could be worth considering if you’re looking for a three-unit mesh kit with Gigabit ports; check how it will connect to your existing router or modem before you buy.

AC1200; dual-band; Gigabit ports; three units.

View at Joybuy
MERCUSYS Halo H3000X (2-pack), Wi-Fi 6 AX3000 mesh Wi-Fi system

MERCUSYS Halo H3000X (2-pack), Wi-Fi 6 AX3000

Could be suitable for a two-unit mesh network across several rooms; check the actual connection between floors at the locations you plan to use.

Wi-Fi 6 AX3000; dual-band; three Gigabit ports per unit.

View at Joybuy
MERCUSYS Halo H25BE (2-pack), Wi-Fi 7 BE3600 mesh Wi-Fi system

MERCUSYS Halo H25BE (2-pack), Wi-Fi 7 BE3600

Could be worth considering if you’re looking for a two-unit mesh kit; check that the planned position of the second unit will allow it to connect to the first.

Wi-Fi 7 BE3600; dual-band; three Gigabit ports per unit.

View at Joybuy

Frequently asked questions

Where should I put an additional mesh node for my language lesson?

Don’t put it in a spot where the connection to the rest of the network has already dropped out. Check the connection between the units at the planned location, then test the lesson in the rooms you use. If you have network cabling, Ethernet backhaul may be an alternative to a wireless link.

Do I need to replace my existing router?

Not necessarily. FRITZ! says the Mesh Set 4200 can connect to a FRITZ!Box, as well as to an existing router or modem. The right connection method and operating mode depend on your existing equipment.

What should I check if I get dropouts after installation?

First, check whether the dropouts happen only in certain rooms and whether the connection between the units is stable there. For Powerline, devolo recommends checking the connection at the wall sockets you intend to use and considering any nearby sources of electrical interference.

How many units should a kit include?

Choose the kit size according to the rooms you need to cover and the locations available; the number of units alone doesn’t guarantee a connection across every floor. FRITZ! describes the Mesh Set 4200 as a kit with two repeaters, while devolo lists a Multiroom Kit with three adapters for multiple floors. Check what’s included in the specific version.

What requirements apply to Wi-Fi devices sold in Germany?

The Bundesnetzagentur lists requirements for selling such devices, including correct CE marking, the required manufacturer and device information, and German-language instructions for non-commercial users. These requirements apply to placing products on the market and offering them for sale; they don’t confirm that a particular listing has already been checked.