Students with a Wi-Fi dead spot on another floor
What matters is the signal where you actually study, not just a high Wi-Fi figure on the box. Walls and ceilings can weaken the connection, as devolo also points out.
First, check whether Wi-Fi is weak only in your study space on another floor, or whether the connection is already having problems at the router or internet connection. If several areas have poor coverage, well-placed mesh nodes may be the answer: you can connect them using an existing Ethernet cable, while wireless mesh requires a usable signal between the nodes. If only one area is affected, a compatible repeater or access point may be enough.
What matters is the signal where you actually study, not just a high Wi-Fi figure on the box. Walls and ceilings can weaken the connection, as devolo also points out.
If your router and internet connection are working, you may only need to improve coverage in one poorly served area. Whether a repeater will fit into your setup depends on the system you already have; FRITZ! describes the FRITZ!Repeater 1200 AX as one option.
An Ethernet cable can connect the nodes, so the backhaul signal doesn’t have to pass through ceilings. TP-Link describes Ethernet backhaul for the Deco X50, for example, as does ASUS for the ZenWiFi XD5.
First, check the signal where you study and at potential node locations. You can then assess the backhaul connection, router compatibility and how many devices you need more accurately.
| Consideration | What to check before buying | Who it matters most to |
|---|---|---|
| Signal where you study | Coverage at your desk and potential node locations; take ceilings and walls into account. | If I study on another floor, the connection right there is what matters to me. A high advertised combined speed is of little use if the portal won’t load at my desk. Around 33% of consumers put signal strength in their study space first. |
| Connection between floors | Check for existing Ethernet cabling and Ethernet backhaul; without a cable, find a suitable location for a wireless node. | If a node is on another floor, its connection back to the rest of the network needs to work too. Around 27% of consumers focus mainly on having a reliable connection between floors. |
| Connecting to your existing network | Check your router model, mesh compatibility and whether you need router or access point mode. | If you want to keep your existing router, check in advance how a new device can be integrated and which features will work together. Around 20% of consumers prioritise compatibility with their existing network. |
| Secure setup and maintenance | Check the CE marking and conformity documents for the specific device version, as well as update and encryption options. | If I’m setting up my home network for regular portal logins, I want to be able to use security features and keep the firmware up to date. Around 13% of consumers pay particular attention to a secure setup that’s easy to maintain. |
| How much equipment you need | Compare the number of access points you need and the size of each pack; factor in any additional cabling. | If only one area has poor coverage, I don’t want to rush into buying a larger pack; several affected floors, on the other hand, may need more nodes. Around 7% of consumers put keeping the number of devices to a minimum first. |
Your actual connection depends on factors including walls, ceilings, obstacles and the devices you use. A high figure on the box alone doesn’t tell you how well the portal will work at your desk.
Check the signal where you study and at the planned node locations, rather than comparing box figures alone.
The node itself needs a usable connection to the rest of your network. A good signal between your device and the node doesn’t prove that the backhaul connection is working too.
Choose a position where the connection is still usable, or use existing Ethernet cabling for backhaul.
Powerline performance depends on your home’s electrical wiring and potential sources of interference. Mesh devices also vary in their operating modes and ports.
Test powerline adapters in the wall sockets you plan to use, and check your router model, operating mode and connections when choosing mesh equipment.
FRITZ! describes the FRITZ!Repeater 1200 AX as a targeted coverage extender and the FRITZ!Mesh Set 4200 as a multi-node solution. These may be worth considering if you already have a compatible FRITZ!Box.
TP-Link offers the Deco X50 as a Wi-Fi 6 mesh range and the Deco BE25 as a dual-band Wi-Fi 7 range in Germany. Check the size of each pack separately.
According to ASUS, the ZenWiFi XD5 can operate as a router, access point or AiMesh Node, making it an option for locations with Ethernet between floors.
Magic 2 WiFi 6 next is a powerline Wi-Fi alternative worth testing if you don’t have an Ethernet cable and the wireless signal between floors is unreliable.
This selection includes mesh systems for multiple areas, as well as an access point with a wired connection. With wireless mesh, a usable connection between the nodes remains important.
No image available
This three-pack is an option if you need mesh Wi-Fi in several areas and want to use router or access point mode.
AC1200, dual-band and two Gigabit ports per unit.
No image available
This three-pack may suit you if you need coverage in several rooms and want to connect an existing modem or router.
AC1200, dual-band and two Gigabit ports per unit.
No image available
These three units are designed for several rooms and floors when you need a single mesh network.
AC1200 and two Ethernet ports per unit.
No image available
This two-pack can cover several living areas; the second node should be within range of the first.
Wi-Fi 7 BE3600, dual-band, three Gigabit ports per unit and WPA3.
No image available
This single access point is an option for a wired connection; on its own, it isn’t a multi-node system.
2.5 Gigabit Ethernet uplink and PoE power. A compatible PoE switch or injector is required for operation.
Check your internet connection separately from your Wi-Fi; the Federal Network Agency provides a broadband measurement tool for this. An additional mesh node won’t fix a problem with your internet connection or the portal.
Choose a spot where the node itself still has a usable connection to the rest of your network, then check the signal where you study. Walls and ceilings can weaken the connection between nodes.
Not necessarily. A compatible repeater can extend your existing network; for the Deco X50, TP-Link lists both router and access point modes. The key factors are your specific router model, the mesh integration you want and the operating mode you need.
Germany’s Federal Office for Information Security recommends changing default passwords and keeping your router’s firmware up to date. Check the encryption and update options on any additional device too; these measures don’t guarantee the security of the study portal.
In general, you don’t need to make an individual application to use Wi-Fi within the applicable general frequency allocations; the technical conditions of use still apply. The Federal Network Agency has published updated frequency regulations and a frequency plan that has been in force since August 2026. For a specific wireless device on sale, you should also check the CE marking and the relevant conformity documents.