Who needs mesh Wi-Fi across multiple floors?

Working on designs across multiple floors

If you upload large files from a workspace away from your router, it’s important to distinguish your broadband upload speed from the connection within your home. Germany’s Federal Network Agency explains how to measure the upload and download speeds you actually get.

Homes with Ethernet between floors

If you have network cables between floors, check whether you can connect your mesh nodes via Ethernet instead of relying solely on a wireless backhaul through the ceiling.

Homes without network cables

If you want to cover another floor, you’ll need to find a location where the node can still maintain a reliable connection to the rest of your network. In its Speed Home WLAN instructions, Telekom advises moving a node closer to the router or other boosters if the connection is weak.

What should you look for when choosing?

Extending your FRITZ!Box mesh

A good fit if: You want to keep your existing FRITZ!Box router and add a compatible FRITZ!Mesh system.

Consider: A wirelessly connected repeater needs a strong enough connection at its location. Also check whether a LAN bridge is possible.

A separate mesh system with Ethernet backhaul

A good fit if: You have Ethernet between floors and want to connect your mesh nodes through it.

Consider: The cable routes and operating mode need to suit your network layout. Advertised wireless data rates don’t predict upload speeds.

A separate mesh system with wireless backhaul

A good fit if: You can’t run network cables between floors, but the nodes can get a reliable wireless connection from suitable locations.

Consider: Ceilings, building materials and sources of interference can affect the wireless link, so test it at the planned location.

Powerline with mesh Wi-Fi

A good fit if: Neither cabling nor a reliable wireless backhaul is an option, and you can test the available sockets.

Consider: Performance depends on your electrical wiring and potential sources of interference. devolo notes that transfer rates can be low at some sockets.

The figures below show the proportions of consumers choosing mesh Wi-Fi for design uploads across multiple floors, grouped by their main concern.

Concern What to check before buying Who it matters most to
Connection between floors Whether Ethernet is available and whether there’s a backhaul connection at the planned node location If I need to cover a workspace on another floor, a reliable connection between the nodes is essential. Around 36% of consumers share this as their main concern.
Identifying upload bottlenecks Compare the broadband upload speed with upload performance at your actual workspace When uploading large design files, I want to know whether the broadband connection or home network is slowing things down. Around 29% of consumers put upload performance first.
Keeping your existing router Check the router model, mesh compatibility, operating mode and cabling If you want to keep your current router, check which expansion option is compatible or whether access point mode is suitable. Around 21% of consumers prioritise router compatibility.
Weighing up the overall effort Compare the number of nodes needed, cable routes and connections If I want to avoid unnecessary devices and complicated cable runs, the effort involved in the specific setup matters. Around 14% of consumers put this first.

Which mistakes should you avoid?

  • Confusing peak Wi-Fi speeds with upload speeds

    A mesh node can help address a bottleneck in your home network, but it can’t make up for a slow broadband upload speed.

    First, measure the connection at your broadband router, then check upload performance at your workspace. This helps you pinpoint the bottleneck before choosing a device.

    Depending on the results, you may need a different location, another node or a different cable route.

  • Assuming Powerline is a guaranteed equivalent to Ethernet

    Performance can vary depending on the socket and sources of electrical interference. devolo also notes that certain VDSL installations may experience internet connection interference.

    Test the sockets you plan to use and check upload performance under your usual conditions before building your setup around them.

    Testing and making alternative plans may take extra time and effort.

Which brands are worth considering?

FRITZ!

FRITZ!Repeaters are one way to expand an existing FRITZ!Box mesh. According to FRITZ!, the FRITZ!Mesh Set 4200 is available with two or three repeaters.

  • FRITZ! lists three wireless units and two Gigabit LAN ports for the FRITZ!Repeater 3000 AX.
  • Check the mesh role and connection type for your specific device combination. A single repeater isn’t the same as a multi-device set.

TP-Link

Deco systems such as the X50 and BE25 are options for a dedicated mesh with wireless backhaul or, depending on the model, a wired connection.

  • TP-Link documents Ethernet backhaul support for Deco. For the BE25, the manufacturer lists two 2.5 Gbit/s ports per unit.
  • These figures aren’t measured upload speeds across multiple floors. If you’re connecting the system behind an existing router, make sure the operating mode and cabling are suitable.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh system with router, access point and AiMesh node modes.

  • ASUS documents Ethernet backhaul and Gigabit connections for the XD5.
  • If you’re connecting through a switch, the operating mode and port configuration need to match the instructions. XD5 specifications don’t apply to every ASUS model.

Telekom

Speed Home WLAN is one option for extending mesh coverage in homes with a compatible Speedport setup.

  • Telekom describes mesh Wi-Fi across multiple floors and explains in its instructions how to identify a weak connection.
  • Setup and mesh functionality depend on the specific router and booster models you’re using.

devolo

Magic 2 WiFi 6 next combines Powerline with mesh Wi-Fi. It may be an alternative if running Ethernet cables or using wireless backhaul isn’t practical.

  • According to devolo, the Powerline adapter provides Wi-Fi and two Gigabit LAN ports.
  • The manufacturer notes that transfer rates may be low at some sockets and that electrical interference is possible. You’ll need to test whether it works in your home.

Mesh systems at Joybuy

The following Joybuy products are mesh systems from TP-Link and MERCUSYS. Choose the pack size and connection type to suit your planned node locations, and check compatibility with your existing router. Wireless devices newly placed on the market in Germany must meet the relevant EU requirements, including the required CE marking. Check the labelling and accompanying information for the specific product.

TP-Link Deco BE22 Wi-Fi 7 mesh system, 2-pack

TP-Link Deco BE22, Wi-Fi 7 mesh system, 2-pack

Could be worth considering if you want to build a mesh with two units and keep your existing router. Check which operating mode is suitable.

Specifications include Wi-Fi 7, dual-band and two Gigabit WAN/LAN ports per unit. Router and access point modes are listed.

View at Joybuy
TP-Link Deco M4 AC1200 mesh system, 3-pack

TP-Link Deco M4 AC1200 mesh system, 3-pack

Could suit you if you’re planning to use several mesh points with a wired backhaul. Check that it’s compatible with your network layout.

The set includes three units. The description lists AC1200 Wi-Fi, Ethernet backhaul support, two Gigabit ports per unit, and router and access point modes.

View at Joybuy
TP-Link Deco S4 AC1200 mesh system, 3-pack

TP-Link Deco S4 AC1200 mesh system, 3-pack

Could be an option if you want to create a single mesh network with three units. Before buying, check how it will work with your router setup.

The description lists dual-band AC1200 and Gigabit Ethernet ports per unit. The set includes three units.

View at Joybuy
MERCUSYS Halo H3000X Wi-Fi 6 AX3000 mesh system, 2-pack

MERCUSYS Halo H3000X, Wi-Fi 6 AX3000, 2-pack

Could be an option for a two-unit mesh if you also want to connect devices via network cable.

Specifications include Wi-Fi 6 AX3000 and three Gigabit ports per unit.

View at Joybuy
MERCUSYS Halo H25BE Wi-Fi 7 BE3600 mesh system, 2-pack

MERCUSYS Halo H25BE, Wi-Fi 7 BE3600, 2-pack

Could be worth considering if you want to set up a two-unit mesh and connect wired devices.

Specifications include Wi-Fi 7 BE3600 and three Gigabit ports per unit.

View at Joybuy

Frequently asked questions

Will mesh automatically speed up my design uploads?

No. First, check the upload speed you’re getting from your broadband connection, then test the connection at your workspace. Mesh can help address a bottleneck in your home network, but it can’t increase the performance of your broadband connection.

Where should I put a wirelessly connected mesh node?

Choose a location where the node can cover the area you want to reach while maintaining a reliable connection to the rest of your network. A connection indicator and a test at your actual workspace can help you find the right spot.

Can I keep my existing internet router?

Yes, as long as the mesh system’s expansion device or access point mode suits your setup. Check your router model, operating mode and the cabling recommended in the manufacturer’s instructions.

What maintenance and extra work should I plan for?

Consider how many nodes you actually need and whether you’ll need to run cables. According to the Verbraucherzentrale, you’re responsible for setup and updates if you run your own router. Check for any ongoing costs and the maintenance included with the specific offer.

What should I look for when buying a mesh Wi-Fi device in Germany?

Wireless devices newly placed on the market in Germany must meet the relevant EU conformity requirements, including the required CE marking. The Federal Network Agency explains that CE marking is mandatory for products covered by the relevant harmonisation legislation. Check the labelling and accompanying information for the specific device.