Who might benefit from mesh Wi-Fi?

Viewers with Wi-Fi black spots

If the router struggles to reach the room where you watch, consider both the location of your playback device and where a node could go. F.A.Z. Kaufkompass explains why the connection between mesh nodes matters too.

Homes with several poorly covered floors

If you have reception problems on several floors, check whether you can connect suitable nodes using Ethernet cables. TP-Link says Ethernet backhaul is an optional connection between the units on the Deco X50.

Homes with an existing router

If you want to keep your existing setup, check whether an extender will work with your router. FRITZ! also describes the Mesh Set 4200 as suitable for connecting to a router from another manufacturer.

What should you look for when buying?

Extend your existing router

Best if: Your internet connection and Wi-Fi work well near the router, but a particular area has poor coverage for playback.

Consider: An extender can let you keep your existing equipment, but the operating mode, kit size and compatibility with your router all need to be right.

Mesh with LAN backhaul

Best if: You need coverage across several floors and have usable Ethernet cables at suitable node locations.

Consider: F.A.Z. Kaufkompass says a wired backhaul is generally less prone to interference, but you’ll need the right cable route and connections in place.

Mesh without cables between floors

Best if: Several floors have poor coverage and you don’t have suitable Ethernet cables to connect the nodes.

Consider: You can place the nodes more flexibly, but each one still needs a strong enough wireless connection to the main unit or the next node.

Priority What to check before buying Who is this most relevant to?
Reception where you watch Check the viewing location and possible node locations; each node needs a strong enough connection of its own. If I want to watch a recording in a room with weak Wi-Fi, the signal there is what matters to me. Around 36% of consumers put coverage where they watch first.
A stable backhaul Check for available Ethernet cables and Ethernet backhaul; without cables, test the wireless route at the planned location. If I watch across several floors, the connection between the nodes needs to be strong too. Around 29% of consumers prioritise a stable backhaul.
Keeping your existing router Compare your router model, connection type, mesh compatibility and router or access point mode. If my router is otherwise reliable, I’d prefer to extend coverage only in the areas where it’s weak. Around 21% of consumers prioritise continuing to use their existing router.
Total cost Check how many nodes you need and whether any services are optional; read about extra features and renewal terms before activating them. If I only want to buy the equipment I need for playback, I want to avoid extra devices or services. Around 14% of consumers prioritise cost and avoiding unnecessary extras.

Avoiding buying pitfalls

  • Focusing only on total speed or coverage figures

    Manufacturer figures or tests carried out elsewhere won’t show how ceilings and the backhaul affect the connection in your particular home.

    Check the signal where you watch and the connection between the planned nodes before deciding how many units you need.

  • Placing a wireless node directly in a black spot

    A node will only help if it has a strong enough connection to the rest of your network.

    Try locations between the router and the black spot, or check whether you can use existing Ethernet cables for backhaul.

  • Replacing your entire existing network without checking first

    An extender may work with your existing equipment; a new mesh system may need a different operating mode and extra setup.

    Compare your router model, connection type and the operating modes supported by the specific devices.

    A new mesh system may take extra time and effort to set up.

  • Assuming you need an optional security subscription

    Armor Plus is an optional add-on for the Orbi 770. NETGEAR says a paid renewal applies if you activate the service and don’t cancel it.

    Only activate the service if you need it, and check the current renewal and cancellation terms first.

    Activating and renewing the service may mean a recurring payment.

Key brands at a glance

FRITZ!

The FRITZ!Mesh Set 4200 comes with two or three units and may suit homes that want to keep using their existing router.

  • According to FRITZ!, the three-unit set contains three FRITZ!Repeater 3000 AX units and can also be connected to a router from another manufacturer.
  • The set doesn’t guarantee reception through the ceilings in your particular home. Check the right kit size and how it will connect to your network before buying.

TP-Link

The Deco X50 and Deco BE25 differ in their Wi-Fi generation and wired connections.

  • TP-Link lists three Gigabit ports per Deco X50 unit and optional Ethernet backhaul. The manufacturer lists two 2.5 Gbit/s ports per unit for the dual-band Deco BE25.
  • According to TP-Link, the Deco BE25 doesn’t have a 6 GHz band. Port specifications and advertised data rates alone can’t predict the playback quality you’ll get in a particular home.

NETGEAR

The Orbi 770 RBE773 is a three-piece tri-band Wi-Fi 7 system for a more extensive new installation.

  • NETGEAR lists an optional wired 2.5 Gbit/s backhaul.
  • The manufacturer’s coverage and performance figures aren’t measurements of your home. Armor Plus is optional; NETGEAR says a paid renewal applies if you activate the service and don’t cancel it.

eero

The eero 6+ is a dual-band Wi-Fi 6 option for homes considering app-based setup and, if needed, multiple units.

  • According to eero, each unit has two automatically assigned 1-GbE ports.
  • You need the Android or iOS app to set up and manage the system. The manufacturer’s coverage figure per unit doesn’t predict performance across three floors.

Joybuy products for mesh Wi-Fi

These Joybuy products are for extending mesh coverage across several rooms or floors. The individual UniFi access points aren’t multi-unit kits, and using them for mesh requires a compatible UniFi network.

TP-Link Deco BE22, 2-pack, dual-band Wi-Fi 7 mesh system

TP-Link Deco BE22 (2-pack), dual-band Wi-Fi 7 mesh system

For expanding your mesh network with two units; according to the product description, they work together as one mesh.

Dual-band Wi-Fi 7; Gigabit Ethernet.

View at Joybuy
TP-Link Deco M4, 3-pack, AC1200 dual-band mesh system

TP-Link Deco M4 (3-pack), AC1200 dual-band mesh system

This three-unit kit is designed to create a shared mesh network and may suit coverage across several rooms or floors.

AC1200; dual-band; Gigabit ports.

The product description lists router and access point modes; check which one suits your existing network.

View at Joybuy
TP-Link Deco X1500, 2-pack, AX1500 dual-band Wi-Fi 6 mesh system

TP-Link Deco X1500 (2-pack), AX1500 dual-band Wi-Fi 6 mesh system

According to the product description, the two units form a mesh network for several areas.

AX1500; dual-band Wi-Fi 6; Gigabit ports.

The actual connection between floors depends on where you place the nodes and the construction of your home.

View at Joybuy
Ubiquiti UniFi U6 Mesh, Wi-Fi 6 access point

Ubiquiti UniFi U6 Mesh, Wi-Fi 6 access point

May be suitable for a mesh installation if you already have a compatible UniFi network.

A single access point, not a multi-unit kit; mesh deployments require a compatible UniFi network.

View at Joybuy
Ubiquiti U7 Mesh, 5000 Mbit/s, Power over Ethernet

Ubiquiti U7 Mesh, 5000 Mbit/s, Power over Ethernet

Designed as a single access point for a mesh deployment in the UniFi Network ecosystem; the device alone isn’t a multi-unit kit.

Dual-band Wi-Fi 7; 5000 Mbit/s; Power over Ethernet.

View at Joybuy

Frequently asked questions

Will mesh help if my theatre recording keeps buffering as I stream it from the internet?

Mesh will only help if the bottleneck is in your home network. Check your internet connection separately from the Wi-Fi signal where you watch. Netflix recommends 5 Mbit/s for FHD and 15 Mbit/s for 4K UHD on its own service with a stable connection; these figures don’t automatically apply to other platforms. The Bundesnetzagentur offers a desktop app to check your fixed broadband connection.

What if the recording is saved locally?

For a local file, streaming recommendations for internet services aren’t a measure of how well it will transfer. Instead, check the route from the storage device through the router and mesh nodes to the playback device; a wired backhaul can make the connection between nodes less prone to interference.

Where should I place extra mesh nodes?

With wireless backhaul, each node needs a strong enough connection to the main unit or the next node. Try locations between them rather than placing a node only where the signal is weakest. If you have Ethernet cables, check whether your devices support Ethernet backhaul.

Do I need a subscription for mesh security features?

Not necessarily: NETGEAR Armor Plus is an optional add-on for the Orbi 770. NETGEAR says a paid renewal applies after the trial if you activate the service and don’t cancel it. Check the current terms before activating it.

Can I use mesh Wi-Fi with 6 GHz in Germany?

There isn’t a single answer for every device; check that the model is intended for Germany and meets the applicable device requirements. Not every Wi-Fi 7 system uses 6 GHz: TP-Link describes the Deco BE25 as a dual-band model without a 6 GHz band.