Who is mesh Wi-Fi suitable for?

Streaming upstairs where the signal drops out

You mainly want a reliable connection for a TV on another floor and can try out different locations for the nodes.

A home with Ethernet between floors

You can use existing network cables to connect the mesh nodes and want to avoid relying on a wireless signal passing through the floor.

A home with an existing router

You want to keep your current router and check before buying whether a compatible extension will do or you need a separate set.

What should you look for when buying?

First, check the connection where you watch TV, then consider how the nodes could connect to each other. This will help you work out whether a different location, Ethernet backhaul or a router extension is right for your home.

What you need What to look for when buying Who is this important to?
Signal at the TV Identify where you’ll be watching and possible locations for the nodes, then check the connection there. If I want to watch a documentary on the TV upstairs, what matters to me is whether the signal reaches that room. Around 36% of consumers put coverage across floors first.
Connection between nodes Check whether Ethernet backhaul or the planned wireless connection is supported by the specific model. If there’s a network cable between floors, I want to avoid relying on a wireless connection between the nodes. Around 29% of consumers prioritise a stable connection between nodes.
Connecting to your router Check your router model, mesh compatibility and preferred operating mode. If I want to keep my current router, I want to know in advance whether a compatible extension will be enough. Around 21% of consumers prioritise compatibility with their existing router.
Total cost and what’s included Compare the number of units in the set, potential extensions, ports and warranty terms. If I only want to buy what I need, I compare the set size and set-up requirements rather than relying on advertised data rates alone. Around 14% of consumers prioritise the total cost.

Common misconceptions

  • Assuming the advertised top Wi-Fi speed is the same as the speed at your TV

    Manufacturers’ figures describe wireless capabilities. Your stream also depends on your internet connection, the location of the nodes and the connection between them.

    First, check the connection where you watch and compare it with a measurement taken near the router. Then compare the systems’ specifications.

  • Putting an extra wireless node beyond the problem floor

    A node needs a usable connection to the rest of the network itself. Adding more wireless access points won’t automatically fix a weak connection between nodes.

    Plan the location and backhaul in advance. If there are network cables between floors, check whether the specific model supports Ethernet backhaul.

  • Assuming a range extender and a standalone mesh set are interchangeable

    Centralised mesh management and operating modes depend on the devices involved and how they’re set up.

    Before buying, check your router model, mesh compatibility, preferred operating mode and what’s included in the set.

Key brands at a glance

FRITZ!

Worth considering if you’re looking at a standalone mesh set or an extension for an existing FRITZ! network.

  • FRITZ! says the FRITZ!Mesh Set 2700 (2-pack) includes two FRITZ!Repeater 2700 units and a five-year manufacturer’s warranty.
  • Having a FRITZ! router doesn’t automatically mean every other mesh device can be added to its central management system. Check the specific devices and set-up requirements.

TP-Link

The Deco X50 range is an option if you’re looking for Wi-Fi 6 mesh and potentially Ethernet backhaul.

  • TP-Link lists three Gigabit ports on each Deco X50 unit, as well as router and access point modes; Ethernet backhaul is also supported as an option.
  • Advertised coverage areas and Wi-Fi speeds don’t tell you what throughput you’ll get through a floor in your home. The Deco BE25-Outdoor isn’t automatically necessary for a film night indoors.

ASUS

The ZenWiFi XD5 may be suitable if you’re looking for a Wi-Fi 6 set or an AiMesh-compatible extension with potential Ethernet backhaul.

  • ASUS lists Ethernet backhaul and AiMesh support for the XD5.
  • Check the specific set variant and any AiMesh devices you already have. Advertised wireless speeds aren’t a measure of streaming performance in your home.

devolo

According to the manufacturer, the WiFi 7 Mesh BE6500 range is available as a 2-pack or 3-pack, and can be used in router or access point mode.

  • devolo lists a three-year manufacturer’s warranty for the range.
  • Before comparing models on these features, check the frequency bands, ports and what’s included with the specific variant.

Huawei

The WiFi Mesh X3 Pro is an option if you’re considering a Wi-Fi 7 mesh system for your home.

  • Huawei lists dual-band Wi-Fi 7 and management through the AI Life app.
  • Product specifications don’t guarantee coverage through every floor. Check the location and what’s included in the set for your home.

Mesh systems at Joybuy

This selection includes mesh sets with two or three units for homes looking to extend Wi-Fi across several rooms or floors.

TP-Link Deco M4 AC1200 mesh Wi-Fi system, 3-pack

TP-Link Deco M4 AC1200 mesh Wi-Fi system (3-pack)

The 3-pack is an option if you want to cover several rooms with mesh nodes.

Joybuy’s product details list three units, each with two Gigabit ports, and router and access point modes.

View at Joybuy
TP-Link Deco S4 AC1200 mesh Wi-Fi system, 3-pack

TP-Link Deco S4 AC1200 mesh Wi-Fi system (3-pack)

The 3-pack may be suitable for extending Wi-Fi across several areas of your home.

Joybuy’s product details list AC1200, dual-band and two Gigabit ports per unit.

View at Joybuy
MERCUSYS Halo H3000X Wi-Fi 6 AX3000 mesh system, 2-pack

MERCUSYS Halo H3000X Wi-Fi 6 AX3000 mesh system (2-pack)

The 2-pack is an option if two mesh units could help extend your Wi-Fi coverage.

Joybuy’s product details list Wi-Fi 6 AX3000, dual-band and three Gigabit ports per unit.

View at Joybuy
MERCUSYS Halo H1200G AC1200 mesh Wi-Fi system, 3-pack

MERCUSYS Halo H1200G AC1200 mesh Wi-Fi system (3-pack)

The 3-pack may suit you if you’re planning to use several mesh units across different rooms or floors.

Joybuy’s product details list three units, each with two Ethernet ports.

View at Joybuy
MERCUSYS Halo H25BE Wi-Fi 7 BE3600 mesh set, 2-pack

MERCUSYS Halo H25BE Wi-Fi 7 BE3600 mesh set (2-pack)

The 2-pack is an option if you’re looking to use two mesh units across several areas of your home.

Joybuy’s product details list Wi-Fi 7 BE3600, dual-band and three Gigabit ports per unit.

View at Joybuy

Frequently asked questions

How can I tell whether my internet connection or Wi-Fi is slowing down the film?

Compare the connection on the device you’re watching on with a measurement taken near the router. Netflix recommends a stable speed of at least 15 Mbit/s for UHD/4K and explains how to check your network in its app. This is Netflix’s streaming recommendation, not a minimum requirement for every mesh product.

Where should I put a mesh node to reach the next floor?

Choose a location where the node can reliably connect to the previous node while also covering the area you want to reach. Once it’s set up, check the connection and test streaming on your TV. If there’s a network cable between floors, a model with Ethernet backhaul may be suitable.

Do I need to replace my current router to use a mesh set?

Not necessarily: FRITZ! says the FRITZ!Mesh Set 2700 can connect to a FRITZ!Box, another router or directly to a fibre modem. TP-Link lists router and access point modes for the Deco X50. Check the operating mode and connections for your specific set-up.

Is a manufacturer’s warranty the same as the statutory guarantee?

No. According to Your Europe, consumer purchases in the EU come with a minimum two-year legal guarantee from the date you receive the goods; the seller is responsible for handling your legal claims. A voluntary manufacturer’s warranty may offer additional benefits, but it doesn’t replace these rights. Check its terms separately.

Can I use the 6 GHz band on a mesh device in Germany?

Germany has a general allocation with conditions of use for the 5945–6425 MHz band, as set out by the Federal Network Agency. Check the applicable regulations and the device specifications to see whether a particular model can use this band and under what conditions. Not every mesh model supports 6 GHz.