Who benefits from which approach?

Streaming room behind thick walls

If Wi-Fi reception is weak where you’ll be watching, plan the connection from the router to the room and check whether you can run a cable or place a node somewhere in between.

Household with several streams running at once

If several people stream at the same time, coverage isn’t the only thing to consider: you’ll also need to know how much of your internet connection’s capacity is available to each device.

Household with an existing router

If you want to keep your router, check before you buy whether an additional node will work with your existing system and which connection options are available.

What should you look for when buying?

First, check whether you can run an Ethernet cable to the planned node location. Then check your internet connection and compatibility with your existing router.

Buying priority What to look for when buying Who is it important to?
Reception through thick walls Check the Ethernet route or a midway location, and reception at the planned node position. If the concert room is behind thick walls, I want to know whether the connection will reach it. Around 36% of consumers put reception through walls first.
Reliable live streaming Check your internet connection and reception at the playback device separately. Netflix recommends 5 Mbit/s for FHD and 15 Mbit/s for UHD on its service; these aren’t general benchmarks for concert streaming. For a live concert, I want to avoid interruptions and assess my internet connection and home network separately. Around 29% of consumers prioritise a reliable stream.
Integration with an existing router Check your router model and operating mode. FRITZ! sets out the FRITZ!Box and software requirements for FRITZ! Mesh over Ethernet. If I want to keep my router, I want to know before buying whether I can add a compatible mesh node. Around 21% of consumers put router integration first.
Setup and ongoing costs Check the number of units in the set, the connections available and which features are included with the specific system without an optional subscription. When setting up a system, I want to know whether my existing connections are sufficient and whether the features I want come with ongoing fees. Around 14% of consumers prioritise setup effort and ongoing costs.

Common buying mistakes

  • Placing the node directly in a Wi-Fi dead spot

    A strong signal between your device and the node won’t help much if the node’s connection to the router is already weak.

    Try a midway location with usable reception. If you can run a cable, consider an Ethernet connection that reaches close to the streaming room.

  • Treating advertised coverage or peak speeds as a guarantee

    The EU manual for the TP-Link Deco BE25 notes that actual Wi-Fi coverage and data rates aren’t guaranteed and depend, among other things, on building materials.

    Plan around your walls and possible locations, then check reception where you’ll be watching rather than relying on square-metre coverage or speed figures alone.

  • Assuming mesh systems from different manufacturers are compatible

    FRITZ! describes mesh integration over Ethernet for compatible FRITZ!Box and software configurations. ASUS lists compatible routers as partners for AiMesh.

    Check your router model, operating mode and supported mesh features before buying.

  • Confusing extra features with what’s included as standard

    For the eero Pro 6E, eero distinguishes between features available without a subscription and certain advanced security and management features included with eero Plus.

    Check which of the features you want are available without a subscription for the exact model.

Key brands at a glance

FRITZ!

A possible extension for a compatible FRITZ! Mesh system, including with an Ethernet connection.

  • According to FRITZ!, the FRITZ!Repeater 3000 AX offers tri-band Wi-Fi 6 and two Gigabit LAN ports.
  • Automatic mesh integration over Ethernet requires compatible FRITZ!Box and software configurations.

TP-Link

Deco systems are an option for a standalone mesh network; make sure the operating mode and cabling suit your existing router.

  • TP-Link describes Ethernet backhaul as an option for homes with thick walls. The EU manual for the Deco BE25 lists two 2.5 Gbit/s WAN/LAN ports per unit.
  • The manual notes that actual wireless coverage and data rates depend on environmental factors such as building materials.

ASUS

The ZenWiFi XD5 offers Wi-Fi 6, with AiMesh and access point operating modes.

  • ASUS describes Ethernet backhaul as an option when network connections are available.
  • Specifications vary between one-, two- and three-packs, so check the pack size of the specific model.

NETGEAR

The Orbi 770 RBE773 is a tri-band Wi-Fi 7 mesh system in a three-pack.

  • The manufacturer describes a standalone set with three units.
  • Manufacturer claims about speed and coverage won’t tell you what connection you’ll get in a particular home with thick walls.

eero

With the eero Pro 6E, the 6 GHz band is intended for compatible devices.

  • According to eero, features including a guest network and Wi-Fi schedules are available without a subscription.
  • Certain advanced security and management features are included with eero Plus; the 6 GHz band alone doesn’t guarantee a better connection through thick walls.

Joybuy products for mesh Wi-Fi and access points

The Joybuy products below include standalone mesh systems and a single UniFi access point. If you have thick walls, pay particular attention to the connection between the router and node, as well as the connections and operating modes you’ll need.

TP-Link Deco BE22 Wi-Fi 7 mesh system, 2-pack

TP-Link Deco BE22 (2-pack)

An option if you’re looking for a two-unit mesh set with wired connections.

Wi-Fi 7, dual-band and two Gigabit WAN/LAN ports per unit.

The product description lists router and access point modes, with setup through the Deco app.

View on Joybuy
TP-Link Deco X1500 AX1500 Wi-Fi 6 system, 2-pack

TP-Link Deco X1500 AX1500 (2-pack)

This two-unit set is worth considering if you’re looking for a single mesh network with wired connections.

Wi-Fi 6, dual-band and two Gigabit ports per unit.

The product description lists automatic roaming and management through the Deco app.

View on Joybuy
TP-Link Deco S4 AC1200 mesh Wi-Fi system, 3-pack

TP-Link Deco S4 AC1200 (3-pack)

This three-unit set is an option if you’re planning to use several mesh units and want to keep your existing router.

Dual-band and Gigabit ports per unit.

The product description lists compatibility with any router and an access point mode; check which operating mode suits your setup.

View on Joybuy
MERCUSYS Halo H25BE Wi-Fi 7 mesh set, 2-pack

MERCUSYS Halo H25BE BE3600 (2-pack)

This two-unit set is worth considering if you need mesh units with several Gigabit ports on each device.

Wi-Fi 7, dual-band and three Gigabit ports per unit.

The product description lists setup and management through the MERCUSYS app.

View on Joybuy
Ubiquiti UniFi U6 Mesh Wi-Fi 6 access point

Ubiquiti UniFi U6 Mesh Wi-Fi 6 Access Point

This standalone access point is an option if you’re looking for a device for a mesh deployment rather than a multi-unit set.

Wi-Fi 6, dual-band, six spatial streams and Gigabit Ethernet uplink.

PoE power is required; management is supported by UniFi Network from version 6.0.45. According to the product name, a PoE adapter is included.

View on Joybuy

Frequently asked questions

Where should you place a mesh node with a wireless connection?

Don’t put it somewhere the router signal is already barely usable. Try a midway location with good reception. If you have an Ethernet cable, you can connect the node by wire closer to the streaming room.

Do I absolutely need Wi-Fi 7 for a live concert stream?

No, not necessarily. First check your internet connection, the link between the nodes and reception at the playback device. Advertised wireless speeds don’t guarantee a particular data rate through walls.

Can a mesh system make up for a slow internet connection?

No, a mesh system can’t make up for a slow internet connection. Bitkom and VATM point out that the speed of your broadband package is shared between people in the household. The video speed you need also depends on the streaming service and resolution.

How do I connect Deco nodes using Ethernet backhaul?

TP-Link recommends setting up the Deco units in the app first, then connecting them by cable. In router mode, TP-Link says satellite units must connect to the LAN port on the main Deco or to a switch connected to it. Always follow the instructions for your specific model.

Do mesh management features always require a subscription?

Not necessarily. According to eero, the eero Pro 6E offers features including a guest network and Wi-Fi schedules without a subscription, while certain advanced security and management features are included with eero Plus. Check what’s included with the specific system.