Who is this guide for?

Home offices behind solid walls

If you have a permanent workspace, a reliable connection at your desk is essential. Check whether you can run a LAN cable to it.

Homes without a cable route

If you don't want to run network cables, you'll need to find a spot where the mesh nodes can still communicate well with each other. Powerline may be an option if the connection works well at the sockets you plan to use.

Homes with an existing FRITZ!Box

If you want to expand your existing FRITZ! mesh, check that the device is compatible with your FRITZ!Box and that the repeater can connect in the way you intend.

What should you look for when buying?

With thick walls, the key factor is how the remote node connects to the rest of your home network.

Mesh node with Ethernet backhaul

Best when: You can run a LAN cable from the router or a suitable switch to the remote node.

Bear in mind: The cable route, connections and operating mode must suit your network setup.

Wireless mesh

Best when: You can find a spot between the router and your home office with a sufficiently strong wireless signal.

Bear in mind: An extra node won't help if the wireless signal between the nodes is completely blocked.

Expanding a FRITZ! mesh

Best when: You use an existing FRITZ!Box and want to keep managing your network through its mesh system.

Bear in mind: Mesh integration requires a compatible FRITZ! setup.

Powerline with mesh Wi-Fi

Best when: You can't run a practical LAN cable or get a sufficiently strong wireless backhaul signal.

Bear in mind: Interference and your electrical wiring can affect the connection. According to devolo, interference is possible with some VDSL connections.

What matters when buying What to check Who should pay particular attention?
Wireless backhaul Check possible locations for the nodes and your system's connection indicator. If I'm on a call behind a thick wall, I want to know that the node itself still has a good connection to the rest of the mesh. Around 36% of consumers would put wireless backhaul first when choosing a solution for this issue.
LAN connection Check the cable route, LAN ports and the system's wiring requirements. If I can run a cable to the remote node, I don't want the connection between mesh units to depend on the walls. Around 29% of consumers would prioritise a wired connection.
Integration with your existing network Check mesh compatibility and the recommended router or access point mode. If I already use a FRITZ!Box, I want to expand my existing network in a way that works well with it. Around 21% of consumers would prioritise integration with their existing system.
Powerline as an alternative Check adapter compatibility and test the connection at the sockets you plan to use. If I can't run a LAN cable or get a usable wireless backhaul signal, I want to try powerline where I plan to use it. Around 14% of consumers would prioritise this alternative.

Common buying mistakes

  • Comparing only the advertised maximum Wi-Fi speed

    A high data rate quoted for a model doesn't prove that the connection between two nodes will be strong enough through the walls in your home.

    Decide first how you’ll handle backhaul and where to place the nodes, then compare the features of each model.

    Depending on how you set things up, adding another node or running a cable may mean extra installation work.

  • Placing the node just beyond the last wall that significantly weakens the signal

    The remote node also needs a sufficiently strong connection to the main network.

    Try an intermediate location or a wired connection.

    Using Ethernet backhaul may mean extra work to run a cable.

  • Assuming powerline is a guaranteed alternative to Ethernet

    Electrical interference can affect the connection. devolo warns of possible interference with some VDSL connections.

    Check that the adapters are compatible and test the connection at the sockets you plan to use.

Brands to consider

TP-Link

Deco systems are an option if you're looking for a standalone mesh network. TP-Link lists Wi-Fi 6 and optional Ethernet backhaul for the Deco X20.

  • The Deco guide covers Ethernet backhaul and different wiring setups in router and access point modes.
  • The advertised coverage figures for the X20 don't demonstrate how it will perform in a home with thick walls.

FRITZ!

FRITZ!Repeaters are an option for extending an existing FRITZ! mesh. FRITZ! lists tri-band Wi-Fi and two Gigabit LAN ports for the Repeater 3000 AX.

  • According to FRITZ!, the Repeater 3000 AX can also connect to a FRITZ!Box via LAN.
  • Mesh integration isn't guaranteed to work with any third-party router.

ASUS

AiMesh and ZenWiFi are worth considering if you want to configure your router and nodes yourself, including Ethernet backhaul.

  • ASUS documents router and access point setups, as well as requirements for using a switch.
  • These are setup instructions, not independent evidence of performance behind thick walls.

NETGEAR

Orbi systems with satellites and Ethernet backhaul are an option when the building layout or distance makes a wireless connection difficult.

  • NETGEAR identifies challenging building construction as one reason to use Ethernet backhaul.
  • Ports and features vary between Orbi models, so check the specifications for the one you're considering.

devolo

Magic powerline adapters with mesh Wi-Fi are an alternative if the wireless backhaul signal is weak and you can't run a LAN cable.

  • devolo describes the Magic 2 WiFi next as offering mesh Wi-Fi and two Gigabit LAN ports.
  • devolo warns that powerline transmission can be affected by interference and that dLAN adapters aren't compatible with the Magic range.

Joybuy products

The products below are wireless mesh systems for homes where you can position the nodes so they still have a good wireless connection with each other.

TP-Link Deco BE22, 2-pack, Wi-Fi 7 mesh system

TP-Link Deco BE22 (2-pack), Wi-Fi 7 mesh system, dual-band, Gigabit Ethernet

For a wireless mesh setup where you can find suitable locations for a good connection between the units.

Wi-Fi 7; dual-band; Gigabit Ethernet.

View at Joybuy
TP-Link Deco M4, 3-pack, AC1200 mesh Wi-Fi system

TP-Link Deco M4 (3-pack), AC1200 dual-band mesh Wi-Fi system, Gigabit ports

For several rooms, as long as the nodes still have a good connection with each other in their chosen locations.

AC1200; dual-band; Gigabit ports.

View at Joybuy
TP-Link Deco X1500, 2-pack, Wi-Fi 6 mesh system

TP-Link Deco X1500 (2-pack), Wi-Fi 6 mesh system, AX1500, dual-band, Gigabit ports

For a wireless mesh setup if you can position the units where they have a sufficiently strong connection with each other.

Wi-Fi 6; AX1500; dual-band; Gigabit ports.

View at Joybuy
MERCUSYS Halo H1200G, 3-pack, AC1200 mesh Wi-Fi system

MERCUSYS Halo H1200G (3-pack), AC1200 dual-band mesh Wi-Fi system

For mesh coverage across several rooms, provided the units can be positioned where they have a sufficiently strong wireless connection.

AC1200; dual-band.

View at Joybuy
MERCUSYS Halo H25BE, 2-pack, Wi-Fi 7 mesh Wi-Fi system

MERCUSYS Halo H25BE (2-pack), Wi-Fi 7 BE3600 mesh Wi-Fi system, dual-band, 3 × Gigabit ports per unit

For a wireless mesh setup where you can position the two units so they have a sufficiently strong connection with each other.

Wi-Fi 7; BE3600; dual-band; 3 × Gigabit ports per unit.

View at Joybuy

Frequently asked questions

Will a faster mesh system automatically stop video calls dropping out?

No. A mesh system changes the connection within your home network, not the performance of your broadband service. Compare your broadband speed test with the connection at your workspace. The Bundesnetzagentur provides its own broadband speed test for this purpose.

Where should you place a wirelessly connected mesh node?

The node itself needs a sufficiently strong connection to the rest of the mesh. Check the connection indicator at the spot you plan to use rather than placing it solely where your laptop gets a poor signal.

What should I consider when using Ethernet backhaul with an existing router?

Check the operating mode and wiring requirements for the system you've chosen. TP-Link's Deco guide explains the difference between router and access point modes.

Will powerline work reliably once the adapters are set up?

Not necessarily. devolo warns that electrical interference can affect transmission and mentions possible interference with some VDSL connections. Test the connection at the sockets you plan to use.