For family videos behind thick walls, the connection between mesh units should guide your buying decision. If you can run a network cable, Ethernet backhaul can bypass the problematic wireless link on the return path. Without a cable, each unit needs to receive a sufficiently strong Wi-Fi signal at its planned location. If the signal is too weak and running a cable isn’t an option, consider powerline with Wi-Fi, bearing in mind that your home’s electrical wiring can affect performance. Also check how the system will work with your existing router and which ports your storage and playback devices need.
Who is mesh Wi-Fi for?
Families dealing with Wi-Fi dead zones behind solid walls
If you want to watch or share videos in rooms further away, make sure the mesh unit in that room can still get a reliable connection to your home network. Deloitte Germany identifies thick walls as a possible cause of poor Wi-Fi reception. The F.A.Z. buying guide also highlights the connection between units as an important factor when deciding where to place them.
Families with network cabling already in place
If you have LAN ports between rooms, check whether the specific system supports Ethernet backhaul. TP-Link and ASUS document this option for certain mesh models. The number of ports should also meet the needs of your wired video devices.
Families with an existing FRITZ!Box
If you want to keep your existing router, consider a compatible FRITZ! mesh extender. FRITZ! documents that the Repeater 3000 AX can be used as a LAN bridge and take over the mesh settings from the FRITZ!Box.
What matters when buying?
For families who want to share videos in rooms behind thick walls, the key considerations are the connection back to the router, the ports available for devices and the installation involved.
| What matters |
What to check before buying |
Who should pay particular attention? |
| Connection between the units |
Check whether the specific model supports Ethernet backhaul, or whether you can place the units where they’ll get a sufficiently strong wireless signal from each other. |
If I want to share videos in a room further away, the unit there must still have a reliable connection to the home network. Around 36% of consumers prioritise this backhaul connection. |
| Video streaming and device ports |
Count the LAN ports you need, and don’t assume that advertised wireless data rates are the same as the speeds you’ll actually get at home. |
If you want to connect storage and playback devices for family videos, consider the entire route the data needs to travel. Around 29% of consumers put video streaming and ports first. |
| Keeping your existing router |
Make a note of your router model and check whether the mode you want, such as mesh or access point, is documented for the system you’re considering. |
If I want to keep my existing router, the extender must support the operating mode I need. Around 21% of consumers prioritise compatibility with their existing router. |
| Installation and extra features |
Before buying, check how many cables and units you’ll need, as well as any conditions attached to the software features you want. |
If you’re planning an installation that suits your needs, bear in mind the possible limitations of powerline and the separate subscriptions required for some extra features. Around 14% of consumers focus mainly on installation and potential ongoing costs. |
Common buying misconceptions
-
Assuming the advertised Wi-Fi data rate is the speed you’ll get through a wall
A model’s theoretical data rate doesn’t tell you how well the units will connect at your chosen locations. Thick walls and where you place the devices can affect the backhaul connection.
First check whether Ethernet backhaul is possible. Otherwise, see if you can find a location between the units where the wireless signal is sufficiently strong.
-
Placing an extra wireless unit right in a dead zone
Any extra unit still needs a sufficiently strong connection to the previous one to extend your home network.
Check the backhaul signal quality at the planned location, or use Ethernet backhaul if you have a suitable cable connection.
-
Assuming powerline is a guaranteed, interference-free shortcut
Powerline performance can be affected by electrical devices, dimmer switches or certain sockets. devolo also describes possible interference with some VDSL connections.
Check the connection at the sockets you plan to use, and follow the manufacturer’s advice if you have a VDSL connection.
-
Assuming extra features are included for good
The range of additional security and management features may depend on whether you take out a separate subscription.
Before you buy, check which features you want are available without a subscription and which require one.
Key brands at a glance
TP-Link
Deco mesh systems may suit households looking for several Wi-Fi units or considering a wired connection between units.
- TP-Link lists three Gigabit ports and optional Ethernet backhaul for the Deco X50.
- The manufacturer’s coverage and data-rate figures don’t show what throughput you’ll get through a particular wall.
FRITZ!
FRITZ!Repeaters can extend an existing FRITZ!Box network. The FRITZ!Repeater 3000 AX can also be used as a LAN bridge in this set-up.
- FRITZ! documents that the combination transfers the mesh settings and lists two Gigabit LAN ports on the 3000 AX.
- Without a LAN connection, the quality of the wireless backhaul still depends on where you place the unit.
ASUS
ZenWiFi and AiMesh models offer different operating options, which need to suit your existing cabling and router set-up.
- ASUS documents Ethernet backhaul for the XD5 and an access point mode for the BT8.
- The BT8’s theoretical maximum data rates don’t show how it will perform behind thick walls.
devolo
Magic 2 WiFi 6 next uses powerline for the backhaul and Wi-Fi in the room where you need it. It could be an alternative if a wireless connection through the wall or a new LAN cable isn’t suitable.
- devolo lists mesh Wi-Fi and two Gigabit ports for this model.
- According to the manufacturer, power supplies, dimmer switches and certain sockets can affect powerline performance. Some VDSL connections may also experience interference.
eero
The eero 6+ is another option for households considering a standalone mesh system managed through an app.
- The product information describes it as a mesh extender.
- According to the provider, a separate subscription is available for additional security and management features.
Mesh products at Joybuy
The Joybuy products below are mesh kits designed to cover several rooms. Whether the backhaul will work through thick walls still depends on the connection and the location of each unit.
No image available
TP-Link Deco BE22 (2-pack), mesh Wi-Fi system, Wi-Fi 7, dual-band
For households looking to cover several rooms with mesh and connect devices to a unit by cable.
Wi-Fi 7 and dual-band; two Gigabit WAN/LAN ports per unit.
View product at Joybuy
No image available
TP-Link Deco M4 (3-pack), AC1200 mesh Wi-Fi system
For households looking to cover several rooms with one shared mesh network.
Dual-band AC1200; two Gigabit ports per unit.
View product at Joybuy
No image available
TP-Link Deco X1500 (2-pack), Wi-Fi 6, AX1500
For households looking to cover two areas with one shared mesh network and connect devices by cable.
Dual-band; two Gigabit Ethernet ports per unit.
View product at Joybuy
No image available
TP-Link Deco S4 (3-pack), AC1200 mesh Wi-Fi system
For households looking to cover several rooms with mesh and connect playback devices to a unit by cable.
Dual-band AC1200; two Gigabit ports per unit.
View product at Joybuy
No image available
MERCUSYS Halo H25BE (2-pack), Wi-Fi 7 BE3600, dual-band
For two living areas with mesh Wi-Fi and ports for devices on each unit.
Three Gigabit ports per unit. The second unit needs to be within range of the first, so placement is particularly important in homes with thick walls.
View product at Joybuy
Frequently asked questions
Where should I place a wirelessly connected mesh unit?
Don’t place it right at the edge of your coverage, where the signal is already weak. It also needs a sufficiently strong connection to the previous unit. Check the backhaul signal quality at the planned location using the set-up guide for your system.
Can I keep my existing FRITZ!Box?
Yes, a compatible FRITZ! mesh extender can work with your existing FRITZ!Box. FRITZ! documents that the FRITZ!Repeater 3000 AX can be used as a LAN bridge and take over the mesh settings from the FRITZ!Box.
What can I check if my powerline connection is slow?
devolo recommends plugging its adapters directly into a wall socket and checking for possible sources of interference, such as power supplies or dimmer switches. The manufacturer also describes possible interactions with the internet connection on certain VDSL profiles.
Can a suitable 6 GHz mesh system be used in Germany?
The German Federal Network Agency has allocated the 5945–6425 MHz frequency range for general Wi-Fi use. Use must comply with the conditions of the applicable general allocation. Decision 76/2025 repealed the earlier Decision 12/2025. For a specific device, its conformity and operating conditions are what matter; the general allocation does not automatically approve every device setting.