Who needs to make this decision?

Students with a Wi-Fi dead spot in their study room

If your lecture runs smoothly near the router but buffers behind thick walls, what matters is the signal at your study spot and the connection to the additional Wi-Fi point. Microsoft Support recommends keeping the number of walls and ceilings between the router and your device to a minimum.

Students who can use a wired connection

If you can use or run an Ethernet cable to your study room, you can avoid a wireless link between Wi-Fi stations. TP-Link and ASUS describe Ethernet backhaul as an option for connecting compatible mesh units.

Households with an existing router

If you’re considering an extender rather than replacing your entire Wi-Fi system, check your router model against the supported mesh or operating modes. FRITZ! explains how to integrate a FRITZ!Repeater into a FRITZ! mesh.

What should you look for when buying?

For a live lecture behind thick walls, the advertised Wi-Fi data rate isn’t the only thing that matters. First, identify the cause of the problem, then decide whether the stations should connect wirelessly or via LAN.

What matters What to check before buying Who is this important to?
Signal in your study room Check where you plan to position the node and test lecture playback in your study room. If I’m sitting in my study room during a lecture, I care about the signal right there, not just the figure on the box. Around 36% of consumers put signal at their study spot first.
Wired backhaul Check the LAN ports, cable route and whether you need Ethernet backhaul or LAN bridge mode. If I can run an Ethernet cable to my study room, I want to avoid a wireless link between the stations. Around 29% of consumers prioritise wired backhaul.
Keeping your existing router Check your router model against the supported mesh system and the intended operating mode. If I want to keep using my router, I want to know whether a compatible extender will do the job before replacing it. Around 21% of consumers focus mainly on compatibility with their existing router.
Connection as the cause Compare the connection near the router with the one at your study spot, and check your broadband connection separately. Before buying new Wi-Fi hardware, I want to rule out the possibility that my internet connection is already affecting the lecture. Around 14% of consumers prioritise checking the connection first.

Common buying mistakes

  • Placing the wireless node right in the dead spot

    The additional node also needs a decent connection to the rest of your network. If you put it where the signal is already barely reaching, its backhaul connection may be weak too.

    Check possible halfway positions and test both the connection at the node and playback at your study spot.

    A poor choice of location may mean you need another node or have to install cabling later.

  • Treating the maximum data rate or coverage figure as a guarantee

    Advertised peak Wi-Fi speeds don’t show how well the connection will reach through the walls in your home.

    Check the connection type, backhaul and location, then assess the signal where you’ll actually be studying.

  • Overlooking your existing router and the operating mode

    Adding to your existing router’s mesh and setting up a separate mesh system are two different solutions. According to eero Support, Wi-Fi access remains available in eero’s Bridge mode, but some advanced network features are unavailable.

    Check that your router model, the network features you want and the new device’s documented operating modes all work together.

  • Assuming every buffering lecture is a Wi-Fi problem

    A mesh system won’t automatically fix an internet connection that already has problems near the router.

    Compare how things work near the router and at your study spot, and check your broadband connection separately. The Bundesnetzagentur provides a broadband measurement tool for this purpose.

Relevant brands at a glance

TP-Link

The Deco range is an option if you want a standalone Wi-Fi system with several stations.

  • TP-Link lists wireless connections and optional Ethernet backhaul for the Deco X50. Each unit is described as having three Gigabit ports and app-based setup.
  • Advertised coverage isn’t a measurement of performance through the walls in your home. You may not need a multi-node set to fix a problem in just one room.

FRITZ!

FRITZ!Repeaters are worth considering as an addition to an existing FRITZ!Box; a FRITZ! mesh set is a separate option.

  • FRITZ! lists a Gigabit LAN port on the FRITZ!Repeater 1200 AX and says it can be integrated into a FRITZ! mesh.
  • If you have a router from another manufacturer, don’t assume it can be integrated into the same FRITZ! mesh.

ASUS

ZenWiFi XD5 is a mesh option if Ethernet is available between the stations you plan to use.

  • ASUS describes Ethernet backhaul and AiMesh with compatible ASUS routers.
  • Advertised coverage and maximum Wi-Fi speed don’t prove how well the signal will pass through the walls in your home. ASUS also notes regional restrictions on 160 MHz.

eero

eero 6+ is an app-managed mesh option for households looking to set up their own Wi-Fi system.

  • eero Support explains that Wi-Fi access can remain available in Bridge mode.
  • Some advanced network features are unavailable in Bridge mode.

NETGEAR

The Orbi 770 Series is a multi-station option if you need coverage in areas beyond your study room.

  • NETGEAR lists Tri-Band and an option for wired backhaul for the RBE773 set.
  • Manufacturer figures for maximum speed and coverage don’t guarantee performance in a particular building. Optional Armor subscriptions are separate from the hardware purchase.

Joybuy products to suit your needs

This selection includes standalone mesh systems with several Wi-Fi points, plus an access point for a possible wired connection to your study room. Before choosing, check that the router, cable route and operating mode you want will work with your network.

TP-Link Deco BE22 (2-Pack) Whole Home Mesh Wi-Fi 7 System

TP-Link Deco BE22 (2-pack), Wi-Fi 7, Dual-Band

Described as a two-unit mesh system with router and access point modes. Check which mode suits your existing internet device.

Each unit is listed with two Gigabit WAN/LAN ports. MLO and OFDMA are also mentioned.

View at Joybuy
Ubiquiti UniFi U6 Mesh WiFi 6 Indoor/Outdoor Access Point

Ubiquiti UniFi U6 Mesh WiFi 6 Access Point

Described as an access point with a Gigabit Ethernet uplink. Check that you have a wired connection and a suitable UniFi setup.

A 48 V PoE adapter is listed. Wireless meshing is described for compatible UniFi networks; PoE is required to power the device.

View at Joybuy
TP-Link Deco M4 Mesh WiFi System AC1200 (3-Pack)

TP-Link Deco M4 AC1200 (3-pack)

This three-unit mesh system is designed for several rooms. If you only need to cover one study room, check that it’s the right size for your needs.

Each unit is listed with two Gigabit LAN/WAN ports. Router and access point modes are supported.

View at Joybuy
TP-Link Deco X1500 Mesh WiFi 6 System AX1500, 2-Pack

TP-Link Deco X1500 AX1500 (2-pack), Wi-Fi 6

This two-unit mesh system is designed for two Wi-Fi points. Check that the second node’s location gives it a strong enough connection to the first.

Each unit is listed with two Gigabit Ethernet ports. Router and access point modes are supported.

View at Joybuy
MERCUSYS Halo H25BE Mesh Wi-Fi Set, Wi-Fi 7 BE3600, 2-Pack

MERCUSYS Halo H25BE (2-pack), Wi-Fi 7 BE3600

This dual-band mesh set includes two units. According to the instructions, the second unit should be within range of the first.

Each unit is listed with three Gigabit ports; MU-MIMO, WPA3 and MLO are also included.

View at Joybuy

Frequently asked questions

Where should I position a wireless mesh node for a live lecture?

Don’t simply put it where the Wi-Fi signal has already disappeared completely, as it also needs a strong enough connection to the main station. Try a halfway point, then check playback at your study spot.

Does Ethernet backhaul help with thick walls?

Yes, if you have a cable route and the system you choose supports the right ports and operating modes. The connection between stations can then run over LAN. Whether your device itself connects via Wi-Fi or LAN is a separate decision.

How can I tell whether it’s the Wi-Fi or the internet connection that’s buffering?

Compare the connection near your router with how it performs in your study room, and check your broadband connection separately. The Bundesnetzagentur provides a broadband measurement tool for this purpose. You may also need to consider the requirements of the lecture platform you’re using.

Can I keep my existing router?

That depends on the device you choose and its operating mode. A FRITZ!Repeater is described as suitable for integration into a FRITZ! mesh. With a standalone system, check the router, access point or bridge mode and the features available in each.

What should I look for when buying a Wi-Fi device in Germany?

Check the specific device variant and its documentation rather than assuming every model from a particular brand meets the requirements. The Bundesnetzagentur lists CE marking, device identification and manufacturer details among the things to check. Also check the declaration of conformity for the specific device and the German-language user information.