Teams working behind thick walls
If you share project files between separate workspaces, how the mesh nodes connect to each other matters.
If you can run an Ethernet cable between rooms, start by looking at mesh systems with Ethernet backhaul. This means the connection between nodes won’t have to pass through the wall over Wi-Fi. If you can’t run a cable, a wireless node needs a suitable midway position; Powerline is another option to test at the sockets you plan to use. Also check the ports for your computer or NAS, and how the system will work with your existing router.
If you share project files between separate workspaces, how the mesh nodes connect to each other matters.
When transferring files to a computer or NAS, check the Ethernet ports and the route to your storage, as well as the Wi-Fi.
If you can’t run an Ethernet cable between rooms, you could use a wireless node placed between them or Powerline. You’ll need to test both connections on site.
First, check the connection between mesh nodes, then the connection to your computer or NAS, and finally how the system will work with your existing router.
| What matters | What to check before buying | Who it matters most to |
|---|---|---|
| Connection between rooms | Does the specific kit support Ethernet backhaul? For Wi-Fi, will the planned midway position still have a good connection to the previous node? | If I share files between rooms, the connection between the nodes needs to work despite the walls. Around 31% of consumers prioritise a stable backhaul connection. |
| Transferring local files | Check the Ethernet ports and their speeds on the exact model against the ports on your computer or NAS. | If I move large project files around my home network, the whole route to my storage matters. Around 25% of consumers prioritise local file transfer speeds. |
| Connecting your existing router | Check your router model, available Ethernet port and whether router or access point mode is supported. | If my internet router works well, I mainly want to extend Wi-Fi to other rooms. Around 19% of consumers prioritise integrating with their existing network. |
| Connecting without running a new cable | Test Wi-Fi at the planned midway position, or Powerline using the exact sockets you intend to use. | If I can’t run a cable between rooms, I need another practical way to connect them. Around 13% of consumers put avoiding new network cables first. |
| Security and access to shared files | Check the Wi-Fi security options and network separation in the chosen operating mode. Project devices need to be able to access the shared files they require. | If I need to protect my project devices while still letting them access local files, the network configuration is crucial. Around 12% of consumers prioritise secure file sharing. |
The new node still needs a reliable connection to the rest of the network. A position without a strong enough backhaul won’t automatically solve the connection problem.
First, try placing it somewhere between the nodes where it can connect to the previous one, or consider a possible Ethernet backhaul.
Depending on the layout of your home, you may need another node or a cable installed afterwards.
The Wi-Fi generation alone doesn’t tell you which frequency bands a particular model uses or what speeds you’ll get through your walls. According to its product specifications, the German TP-Link Deco BE25 is a dual-band model without 6 GHz.
Compare the frequency bands, ports and backhaul type of the exact model rather than looking at the Wi-Fi generation alone.
devolo warns that transfer speeds can be low at individual sockets and that electrical interference may affect the connection.
Test the adapters in the sockets you plan to use and check the connection during a typical file transfer.
If the connection isn’t fast enough there, you may need to try a different position or connection method.
NETGEAR lists an optional security subscription for the Orbi 770, so it’s worth considering add-on services separately from the system’s core mesh features.
Check the terms and what’s included in the additional service before activating it.
Deco systems such as the Deco BE25 are worth considering if you want a standalone mesh system with the option of an Ethernet connection between nodes.
The FRITZ!Mesh Set 4200 extends an existing network; documented versions include two or three FRITZ!Repeater 3000 AX units.
The ZenWiFi BT8 is worth considering if you’re looking for a tri-band system with router or access point mode and wired backhaul.
Magic 2 WiFi 6 next combines Powerline with mesh Wi-Fi at the far end of your home.
The Orbi 770 RBE773 is a three-piece tri-band mesh system with optional wired backhaul.
This Joybuy selection includes mesh systems for use across multiple rooms. For each model, check that its connection between nodes is suitable and that it’s compatible with your existing router.
No image available
This 2-pack is worth considering if you’re looking for a dual-band mesh system with Wi-Fi 7 for several rooms.
Wi-Fi 7; dual-band; Gigabit Ethernet.
No image available
This 3-pack is an option if you’re looking for a mesh system with three units and Gigabit ports.
AC1200; dual-band; Gigabit ports.
No image available
This Deco set is worth considering if you’re looking for a Wi-Fi 6 mesh system for several rooms. Check that the devices will work with your existing network first.
Wi-Fi 6; AX1500; dual-band; Gigabit ports.
No image available
This 2-unit mesh system is an option if you’re planning to use two units in rooms with different Wi-Fi needs.
AC1200; dual-band; Gigabit ports.
No image available
This 2-pack is worth considering if you’re looking for a dual-band mesh system with Wi-Fi 7 and several Gigabit ports per unit.
Wi-Fi 7 BE3600; dual-band; 3 × Gigabit ports per unit; WPA3.
Don’t put it where the signal is already too weak to be useful. Check that it can connect to the previous node from the planned midway position, as the backhaul needs to work too.
TP-Link explains how to check this on the satellite in the network map in the Deco app. The wiring required also depends on whether Deco is running in router or access point mode.
Only if they can access the file shares they need from there. The German Federal Office for Information Security describes a guest network as separate from the home network, so check how devices can access files and set up project file shares deliberately.
No. The German Federal Network Agency repealed order 12/2025 with order 76/2025. For a specific 6 GHz device, the current terms of use apply, not the repealed version.