Who might benefit from mesh Wi-Fi?

Audiobook fans in Wi-Fi dead spots

If you download audiobooks in a room beyond thick walls, reception where you listen and suitable places to position the nodes are key. With a wireless connection, the link between the nodes also needs to work well.

Homes with Ethernet between rooms

If an Ethernet cable reaches somewhere near where you listen, check whether you can use it to bypass the wireless connection between mesh nodes.

Owners of a router that works well

If your internet connection and router work well otherwise, an extension may be worth considering instead of replacing everything. The key is whether the extra device works with your router and the operating mode you want to use.

What should you look for when buying?

What you need What to check before buying Who should pay particular attention?
Reception where you listen Reception where you download, and possible places to position the nodes. Manufacturers’ coverage claims don’t guarantee good reception in every room. If I download in a room beyond thick walls, reception there is what matters to me. Around 36% of consumers put reception where they download first.
Connection between nodes Whether there’s still a wireless signal at the point where you’d place an intermediate node, or whether Ethernet can reach the more distant node. If the wall between the nodes also weakens the signal, I want to know whether wireless backhaul will be reliable or whether a cable is an option. Around 29% of consumers say the connection between access points is their most important buying consideration.
Keeping your existing router Your router model and firmware, plus compatibility with the mesh or access point mode you want to use. If my router works reliably otherwise, I’d like to keep it and find a suitable extension. Around 21% of consumers prioritise keeping their existing network.
Set-up effort and number of devices What’s included in the box and how many locations need coverage. Also check whether you’ll need cables or extra configuration. If only one room where I listen to audiobooks has poor coverage, I don’t want to set up more devices than necessary. Around 14% of consumers mainly look for the simplest possible purchase and set-up.

Common buying mistakes

  • Putting a wireless node right in the dead spot

    A mesh node with a wireless connection still needs a reliable link to the rest of the network. If you put it somewhere with almost no reception, the connection between the nodes may be weak too.

    Try positioning it somewhere in between first. If the wireless link still isn’t strong enough, check whether Ethernet backhaul is an option and whether you have the necessary ports.

    Depending on your home’s layout, you may need another node or have to deal with the extra work of installing an Ethernet cable later.

  • Confusing a single device with a mesh kit

    A single node isn’t automatically a kit for multiple locations. The Joybuy listing for the Deco BE25 is clearly labelled as a 1-pack.

    Compare what’s in the box with the locations you actually want to connect.

    You may need another compatible device to cover separate locations.

  • Expecting all router features in access point mode

    According to TP-Link, some router features aren’t available with Deco in access point mode, including parental controls and port forwarding.

    Before setting things up, decide which device will handle router tasks and provide the extra features you want.

  • Assuming Powerline is guaranteed to work through any wall

    Powerline uses your home’s electrical wiring to connect different locations. The advertised maximum speed doesn’t tell you what connection you’ll get in your home. devolo Magic 2 WiFi next is also incompatible with adapters from the older dLAN range.

    Check which adapter range you have and test the connection at the sockets you plan to use.

    Depending on what you already have, you may need a starter kit and additional compatible adapters.

Brands and their approaches to mesh

These notes refer to the specific product ranges mentioned, not to every device from each brand. The right solution also depends on your router, cables and the layout of your home.

TP-Link Deco

According to TP-Link, Deco systems can create a standalone Wi-Fi network or work in access point mode to extend an existing wired network.

  • TP-Link describes Ethernet backhaul between Deco units.
  • Some router features aren’t available in access point mode. The two 2.5-Gbit/s ports per unit are specific to the Deco X50 Pro, not all Deco models.

FRITZ!

The FRITZ!Mesh Set 4200 is a multi-unit Wi-Fi 6 solution. According to FRITZ!, it can be used with a FRITZ!Box, a router or a fibre-optic modem.

  • According to the manufacturer, the two-pack includes two FRITZ!Repeater 3000 AX units.
  • Whether a multi-device kit is right for a single dead spot depends on how many locations need coverage and on your existing network.

Telekom

Speed Home WLAN can extend certain existing Speedport networks, so you may not need to replace your router.

  • Telekom lists mesh-capable Speedport models and up-to-date firmware as requirements for connecting the devices.
  • According to Telekom, Speedport Smart and Smart 2 aren’t mesh bases themselves. Check that your specific devices are compatible.

devolo

Magic 2 WiFi next connects locations through your home’s electrical wiring, making it an alternative if you don’t have an Ethernet cable.

  • According to devolo, Magic 2 WiFi next adapters form a mesh network.
  • Adapters from the older dLAN range aren’t supported. The advertised Powerline data rate isn’t a measurement of your home’s electrical wiring.

ASUS

For the ZenWiFi XD5, ASUS describes optional Ethernet backhaul for locations with network ports.

  • If you already have Ethernet, you can connect the nodes by cable.
  • Manufacturers’ coverage and data rate claims don’t guarantee good reception through the walls in your home.

Joybuy products

The Joybuy products shown here are multi-unit mesh systems, making them worth considering if you need coverage in several locations. If only one room is affected, a suitable extension to your existing Wi-Fi may be enough to start with.

TP-Link Deco BE22, 2-pack, dual-band Wi-Fi 7 mesh system

TP-Link Deco BE22, 2-pack, dual-band Wi-Fi 7 mesh system

This two-pack is designed to connect several locations as a mesh network.

Wi-Fi 7; dual-band; Gigabit Ethernet.

View at Joybuy
TP-Link Deco X1500, 2-pack, dual-band Wi-Fi 6 mesh system

TP-Link Deco X1500, 2-pack, dual-band Wi-Fi 6 mesh system

This kit is designed to set up two locations as one mesh system.

Wi-Fi 6; dual-band; Gigabit ports.

View at Joybuy
TP-Link Deco S4, 3-pack, AC1200 mesh system

TP-Link Deco S4, 3-pack, AC1200 mesh system

This three-unit kit is designed to connect several locations to one mesh network.

AC1200; Gigabit ports.

View at Joybuy
MERCUSYS Halo H3000X, 2-pack, Wi-Fi 6 mesh system with AX3000

MERCUSYS Halo H3000X, 2-pack, Wi-Fi 6 mesh system with AX3000

This two-pack is designed to connect two locations as one network.

Wi-Fi 6; AX3000; three Gigabit ports per unit.

View at Joybuy
MERCUSYS Halo H1200G, 2-pack, AC1200 mesh system

MERCUSYS Halo H1200G, 2-pack, AC1200 mesh system

This two-pack is designed to connect two locations as a mesh network.

AC1200; Gigabit ports.

View at Joybuy

Frequently asked questions

Will Wi-Fi 7 automatically speed up my audiobook download through a wall?

No. Wi-Fi 7 doesn’t guarantee a particular download speed where you listen. Wall materials and the connection between nodes matter too, so first check whether the problem really is limited to the more distant room.

Where should I put an extra mesh node?

With a wireless connection, place the node somewhere it can still get a reliable signal from the rest of the mesh, rather than right in the dead spot. With Ethernet backhaul, you can connect the more distant node using an Ethernet cable. Then check the device settings to see which backhaul connection is being used.

Can I keep my existing router?

It depends on the solution and your router model. TP-Link describes an access point mode for Deco that works with an existing wired network, but some Deco router features won’t be available. To connect to an existing Telekom mesh, the specific Speedport model and its firmware are what matter.

What should I do to keep my Wi-Fi secure after setting it up?

Keep the firmware up to date and use a long, complex Wi-Fi password. Germany’s Federal Office for Information Security recommends these steps as security precautions; they don’t tell you how well the wireless signal will travel through a wall.

Do I need an individual frequency allocation for a private Wi-Fi mesh network in Germany?

For Wi-Fi frequencies allocated for general use, an individual frequency allocation isn’t required for normal operation within the applicable conditions, as Germany’s Federal Network Agency explains. Radio equipment placed on the market in Germany must also meet the relevant product regulations, including CE marking. This doesn’t mean a device will provide good reception in your home.