Who this buying decision is relevant to

Streaming through thick walls

If you want to stream a documentary in a room at the far end of your home, the key question is whether the mesh node can still get a reliable connection to the main unit from where you plan to put it.

Homes with Ethernet ports in several rooms

If you have network sockets in your rooms, check whether a wired backhaul can connect the mesh stations, allowing the station at the far end to provide a connection for your other devices.

Homes with an existing FRITZ! network

If you already use a compatible FRITZ!Box, check whether a repeater can extend your existing network rather than setting up a second mesh system.

What to look for when buying

First, check the connection between your router and the potential node location. Then check the connection at your streaming device and compatibility with your existing home network.

What matters What to check before buying Who it matters most to
Getting a connection through or around walls Choose a location with good reception from the main unit, and check for existing Ethernet routes and Ethernet backhaul. NETGEAR lists Ethernet backhaul as a possible option for buildings whose construction affects the Wi-Fi signal. If I have to put the node in the far room because of the thick wall, I want to know whether it can still reach the main unit from there; around 36% of consumers prioritise a reliable connection between rooms.
Streaming on your playback device Test the connection at your TV and check whether you can use an Ethernet port on the device or node. Netflix recommends a stable internet speed of at least 15 Mbit/s for 4K UHD; this is not a required mesh rating. If my main aim is to stabilise streaming on the TV, what matters is the connection that actually reaches it; around 29% of consumers prioritise streaming on their playback device.
Connecting to your existing home network Check your router model, as well as mesh compatibility, operating mode and, where applicable, Ethernet bridge support for the specific device. If you want to keep using your existing router, make sure an additional node is compatible with your current setup; around 21% of consumers prioritise integration with their home network.
Cost and ongoing support Check how many stations you need, which features are included and the terms for any optional services on the specific offer. If I need to keep an eye on the features and any ongoing services, I want to understand how many stations I need and what optional services involve; around 14% of consumers prioritise cost and support.

Common misconceptions

  • A high total Wi-Fi speed automatically means a stable stream

    The speed printed on the box doesn’t tell you whether the connection between mesh stations will remain stable through thick walls, or what internet speed will reach your TV.

    Test the connection at your playback device, and assess the backhaul and the node’s location separately.

  • The second node should go directly behind the wall that blocks the signal

    A mesh station still needs a connection to the main unit. If the wireless link is too weak at that spot, the node may not be able to relay your stream reliably.

    First, look for a location with a reliable signal and check for existing Ethernet routes. Depending on your setup, you may need a suitable cable route or an additional node.

  • Wi-Fi 7 automatically means 6 GHz support

    The TP-Link Deco BE25 tested by PC-WELT did not have a 6 GHz band, despite supporting Wi-Fi 7. And an extra wireless band alone doesn’t prove that the connection will work better through a particular wall.

    Check the wireless bands and backhaul on the exact model, rather than comparing Wi-Fi generations alone.

  • An optional security service is included permanently

    NETGEAR describes Armor on the Orbi RBK763S as a subscription service and says the first year is included.

    Before buying, check which features you actually need for your home network and what terms apply after the included period.

Relevant brands at a glance

These points refer to the product ranges and features mentioned; they don’t indicate how well a signal will perform in any particular location.

FRITZ!

The FRITZ!Repeater 3000 AX is a Wi-Fi 6 tri-band model for extending a compatible FRITZ! mesh network. FRITZ! lists two Gigabit LAN ports for this model.

  • The LAN ports let you connect devices by cable.
  • Check that mesh integration and the Ethernet bridge you want to use are compatible with your specific router and repeater combination.

TP-Link

TP-Link lists optional Ethernet backhaul for the Deco X50 and also offers standalone mesh systems such as the Deco BE25.

  • The X50 lists wired backhaul as an optional connection method.
  • PC-WELT found that the Deco BE25 model it tested does not have a 6 GHz band. Theoretical wireless speeds don’t prove that the connection will work through your walls.

ASUS

The ZenWiFi XD5 is a mesh option for which ASUS lists Ethernet backhaul and AiMesh support.

  • You can set up a wired backhaul using existing network sockets in your rooms.
  • Check whether router or access point mode is right for your existing network setup.

NETGEAR

The Orbi RBK763S is a tri-band set with a router and two satellites, designed for homes that need several access points.

  • NETGEAR lists a dedicated backhaul and Ethernet ports for the set.
  • NETGEAR describes Armor on the RBK763S as a subscription service with the first year included. Check the applicable terms if you want to use the service.

Telekom

Speed Home WLAN is an extension option for compatible Speedport setups.

  • If the connection is shown as weak, Telekom recommends moving the station closer to the Speedport or to other Wi-Fi boosters.
  • For use with a Speedport 7 or later, Telekom’s instructions list additional requirements, including a Telekom landline connection, the MeinMagenta app and a Telekom login.

Joybuy products for mesh Wi-Fi

The products below include mesh sets and a single extension node. If you have thick walls, pay particular attention to whether you can connect the stations by Ethernet or whether the planned wireless location still gets a sufficiently strong signal from the main unit.

TP-Link Deco BE22 mesh Wi-Fi system, two-pack

TP-Link Deco BE22 (2-pack), Wi-Fi 7 mesh system, dual-band, Gigabit Ethernet, white

This two-unit set is worth considering if you want mesh Wi-Fi in several rooms and need to connect devices to a node by cable.

Wi-Fi 7 and dual-band; two Gigabit WAN/LAN ports per unit. Router and access point modes are listed.

View at Joybuy
TP-Link Deco M4 mesh Wi-Fi system, single unit

TP-Link Deco M4, AC1200 mesh Wi-Fi system, 1-pack, dual-band, Gigabit ports, white

This single node is designed to extend an existing Deco network and supports Ethernet backhaul.

AC1200, dual-band and two Gigabit Ethernet ports. You’ll need an existing or additional Deco device to create a multi-station setup.

View at Joybuy
TP-Link Deco X1500 mesh Wi-Fi system with two units

TP-Link Deco X1500, AX1500 mesh Wi-Fi system, 2-pack, Wi-Fi 6, dual-band, Gigabit ports, white

This two-unit set is a good fit if you need several mesh stations and a wired connection at the node.

Wi-Fi 6, dual-band and two Gigabit Ethernet ports per unit. Setup and management via the Deco app are listed.

View at Joybuy
MERCUSYS Halo H3000X mesh Wi-Fi system with two units

MERCUSYS Halo H3000X (2-pack), Wi-Fi 6 AX3000, dual-band, 3 × Gigabit ports per unit

This set of two Halo units could suit you if you want to provide coverage in several rooms and connect devices by cable near the stations.

Wi-Fi 6, AX3000 and dual-band; three Gigabit ports per unit.

View at Joybuy
MERCUSYS Halo H1200G mesh Wi-Fi system with three units

MERCUSYS Halo H1200G, AC1200 mesh Wi-Fi system, 3-pack, dual-band, white

This three-unit set is an option if you plan to use several mesh stations and want to connect devices by Ethernet near a station.

Dual-band AC1200 and two Ethernet ports per unit.

View at Joybuy

Frequently asked questions

How can I tell whether Wi-Fi or my internet connection is slowing down my stream?

Check the connection directly at your playback device and compare it with a test closer to the router. Netflix recommends a stable internet speed of at least 15 Mbit/s for 4K UHD. This recommendation applies to Netflix and isn’t a general requirement for every streaming app.

Where should I put a wireless mesh node?

Choose a location where the node can still get a sufficiently strong connection to the main unit, rather than automatically placing it just behind the biggest obstruction. If the connection is shown as weak, Telekom recommends moving Speed Home WLAN closer to the router or to other Wi-Fi boosters.

When is a cable between mesh stations useful?

Ethernet backhaul is an option when the building’s construction affects the wireless link between the router and satellite. Whether you can use it depends on the cable route and the ports on your chosen system.

What ongoing costs should I check before buying?

Check how many stations you actually need and whether any optional services are relevant to you. NETGEAR describes Armor on the Orbi RBK763S as a subscription service with the first year included; this doesn’t mean mesh systems in general have a subscription fee.

Do I need an individual frequency allocation for private Wi-Fi in Germany?

You don’t need to apply for an individual frequency allocation for Wi-Fi in the frequency bands generally allocated by the Federal Network Agency; the applicable conditions of use still apply. Among the criteria it lists for market surveillance are CE marking, product traceability and accurate manufacturer details.