Who needs to make this decision?

A study behind thick walls

If you download course files in a room with a weak router signal, the key question is whether the additional station can still get a decent connection to your home network. Your router’s location also affects Wi-Fi reception, as Bitkom e. V. explains.

A home with usable Ethernet sockets

If an Ethernet cable reaches your study, you can provide Wi-Fi there without relying on a wireless connection through the wall between the stations. TP-Link and ASUS describe Ethernet backhaul as an option when suitable network connections are available.

A home with an existing FRITZ!Box

If you want to extend your existing home network, a compatible FRITZ! repeater could be a good option. FRITZ! describes the 1200 AX as a mesh extender with a Gigabit LAN port.

What should you look for when buying?

Ethernet backhaul

A good fit if: You can connect the router and study with an Ethernet cable or network socket.

Consider: The cable route and the connections on your chosen system need to be suitable.

Wireless mesh

A good fit if: A station placed between the router and your study can still get a decent connection to the main station.

Consider: The layout of your home also needs to allow a good connection between the stations.

Powerline with Wi-Fi

A good fit if: You don’t want to run an Ethernet cable and a wireless connection through the walls isn’t good enough.

Consider: Transfer speeds may be low at some sockets.

Optimise your router’s location

A good fit if: You’re not yet sure whether the Wi-Fi link to your study is actually slowing your downloads.

Consider: Even with a better router location, heavily insulating walls may still mean you need an additional access point.

First, compare the connection in your study with the one by your router. Then decide whether Ethernet, Wi-Fi or Powerline should bridge the difficult part of the connection.

What you need What to check before buying Who should pay particular attention
Wireless connection through your home Check possible locations for a midway station and its connection to the main station. If I can’t use a cable, the station in my study still needs a decent connection to the router or the next node. Around 36% of consumers say Wi-Fi coverage is their most important buying consideration.
Ethernet instead of wireless backhaul Check your network sockets, cable route, Ethernet backhaul and the number of free ports you’ll need. If I can connect my router and study with an Ethernet cable, I don’t want to rely on Wi-Fi backhaul through the wall. Around 29% of consumers say a wired connection is their most important buying consideration.
Integration with your existing router Check your router model, mesh compatibility and the router or access point mode you need. If I want to keep using my existing router, the new station needs to work with its network and the mode I want to use. Around 21% of consumers say integrating their existing router is their most important buying consideration.
Components and ongoing maintenance Check what’s included, how many stations and adapters you need, and the available update and security options. If I’m planning to add stations or adapters, I also want to consider the ongoing maintenance involved. Around 14% of consumers focus on components and long-term management.

Common buying mistakes

  • Assuming the advertised Wi-Fi speed is the same as the download speed at your desk

    A high advertised Wi-Fi speed doesn’t, on its own, tell you how quickly course files will download through a particular wall. Your internet connection and the link between the stations also affect performance.

    Compare the connection near your router with the one in your study, and test your internet connection separately from the Wi-Fi link. The Bundesnetzagentur offers a test for fixed broadband connections; it doesn’t automatically measure Wi-Fi in your study.

  • Putting a wireless station directly in a dead zone

    The station needs to receive data from the router or another node. If you place it somewhere the signal has already dropped out, it won’t fix the weak connection to the main station.

    Try a midway location with decent reception or, if possible, use Ethernet backhaul.

    You may need another node, without fixing the weak connection to the main station.

  • Assuming Powerline performance is the same at every socket

    Transfer speeds can also be low at some sockets with Powerline. devolo highlights this as a possible limitation.

    Check what’s included in the kit, whether it’s compatible with your existing adapters, and how well it works at the sockets you plan to use.

  • Buying a new mesh system without checking your existing router

    A FRITZ! mesh extender and a standalone mesh system are different ways to expand your home network.

    Make a note of your router model and check compatibility, the mode you want to use and the available connections before buying. If you choose a standalone system, make sure you know whether it should work as a router or an access point.

Key brands at a glance

FRITZ!

A relevant choice for homes looking to extend an existing FRITZ! network. FRITZ! lists a Gigabit LAN port on the FRITZ!Repeater 1200 AX.

  • A mesh extender is an option if you already have a compatible FRITZ!Box.
  • The repeater isn’t automatically a replacement for a standalone router-and-satellite system; it also needs to be placed somewhere with a decent connection to the base station.

TP-Link

TP-Link describes the Deco X50 as a standalone Wi-Fi 6 mesh system with optional Ethernet backhaul. The German product page lists three Gigabit ports per unit.

  • TP-Link says Ethernet backhaul between Deco units is more stable and faster than Wi-Fi backhaul.
  • The advertised coverage area doesn’t measure performance through the walls in your particular home.

ASUS

According to its German specifications, the ZenWiFi XD5 offers an access point mode and optional Ethernet backhaul for homes with network sockets.

  • ASUS lists one Gigabit WAN/LAN port and one Gigabit LAN port per unit.
  • ASUS notes that specifications may vary by country; advertised Wi-Fi speeds depend on suitable conditions and devices.

devolo

According to devolo, the Magic 2 WiFi 6 next combines Powerline over your existing electrical wiring with mesh Wi-Fi.

  • It’s an option if neither wireless backhaul nor an Ethernet cable is suitable.
  • Transfer speeds may be low at some sockets. According to the manufacturer, existing devolo dLAN adapters aren’t compatible with the Magic range.

NETGEAR

NETGEAR describes the Orbi RBK763S as a set comprising a router and two satellites, with a dedicated connection between the router and satellites.

  • A dedicated connection is one possible approach for creating a larger network.
  • This doesn’t guarantee a particular level of performance through the walls in your home. NETGEAR describes Armor as a subscription service that includes the first year; check the terms for continuing the service afterwards.

Related products at Joybuy

The products below include mesh systems for several rooms and a mesh-capable access point. When choosing, pay particular attention to your existing router, the connection between the stations and the mode you need.

TP-Link Deco BE22, 2-pack

TP-Link Deco BE22, 2-pack

For several rooms if you’re looking for a mesh system with router or access point mode.

Wi-Fi 7, dual-band and two Gigabit WAN/LAN ports per unit.

View at Joybuy
TP-Link Deco M4, 3-pack

TP-Link Deco M4, 3-pack

For several rooms if you want to set up a mesh network with access point mode.

AC1200, dual-band and two Gigabit LAN/WAN ports per unit.

View at Joybuy
TP-Link Deco X1500, Wi-Fi 6, 2-pack

TP-Link Deco X1500, Wi-Fi 6, 2-pack

For several rooms if you’re looking for a mesh system with two units.

AX1500 and two Gigabit ports per unit.

View at Joybuy
MERCUSYS Halo H25BE, 2-pack

MERCUSYS Halo H25BE, 2-pack

For several rooms if you’re planning a mesh Wi-Fi set with two units.

Wi-Fi 7 BE3600, WPA3 and three Gigabit ports per unit.

View at Joybuy
Ubiquiti UniFi U6 Mesh Wi-Fi 6 access point

Ubiquiti UniFi U6 Mesh Wi-Fi 6 access point

For an existing compatible UniFi network if you’re looking for a mesh-capable access point.

One Gigabit Ethernet port; a PoE adapter is listed as included. A compatible UniFi network is required for mesh use.

View at Joybuy

Frequently asked questions

How can I check whether Wi-Fi or my internet connection is slowing down my downloads?

Compare the connection in your study with a test taken as close to the router as possible, or with a wired LAN connection. The Bundesnetzagentur offers a desktop broadband test for fixed-line connections; it doesn’t automatically measure the wireless link in your study. Connected devices also share the available broadband capacity.

Does the additional station have to go directly in my study?

With a wireless connection, the station still needs a decent connection to the main station where you place it. So try a midway location. With Ethernet backhaul, you can connect the stations using an Ethernet cable instead.

What should I do after setting up my Wi-Fi?

The German Federal Office for Information Security recommends changing default, generic administration passwords and keeping your router’s firmware up to date. Also check whether your chosen system can install updates automatically.

Which components and service terms should I check before buying?

Check that what’s included matches the number of stations and cables you need, as well as any Powerline adapters. For NETGEAR’s Orbi RBK763S, the manufacturer describes Armor as a subscription service that includes the first year; check the terms for continuing the service afterwards.

What details should I check for a wireless networking device in Germany?

For the specific product, check for the CE mark, identifiable manufacturer details, German instructions with any required information, and a declaration of conformity. The Bundesnetzagentur lists these points as part of its market surveillance; a product name alone doesn’t prove that the specific device complies.