Who might need mesh Wi-Fi behind thick walls?

Streaming in a room with poor reception

You want a decent connection at your regular TV or streaming spot, behind thick internal walls. Running an Ethernet cable to a suitable location could be one option.

A home with no route for a cable

You need Wi-Fi beyond the walls but can’t connect a network node via Ethernet. The key is finding an intermediate spot where the wireless connection to the main device is still strong enough.

A home with an existing router

You want to keep a router that works well and initially improve coverage in just the room that’s further away. Check whether an extension is compatible with your router model.

What should you look for when buying?

First, check the connection where you watch and how the node could connect back to the router. This will help you decide whether a cable, a better location for a wireless node or an extension that works with your existing router is the right option.

What matters What to check before buying Who is this important to?
Reception where you watch Check the signal at your TV or streaming device; check how many nodes are included in the set. If I want to watch a documentary in a fixed spot behind several internal walls, reception right there matters most to me. Around 36% of consumers put this first.
Connection between the nodes Check for LAN backhaul support and the available ports; if you’re not using a cable, choose a location with a strong enough wireless connection. If I need a node in the room where I watch films, I want to know how it connects to the router. Around 29% of consumers prioritise a reliable backhaul connection.
Keeping your existing router Check your router model and documented compatibility; for a new system, check which operating modes it supports. If my router works reliably and only one room has poor coverage, I’d like to keep using it if possible. Around 21% of consumers prioritise an extension that works with their existing network.
Bandwidth available for streaming Compare the connection at your streaming device with one close to the router; check the requirements of your streaming service. Bitkom and VATM point out that devices in your home share your broadband connection’s bandwidth. If I want to know whether other devices are using the connection while I watch a film, the bandwidth actually available is what matters. Around 14% of consumers put streaming capacity first.

Common buying mistakes

  • Putting the wireless node right in a Wi-Fi dead zone

    The node can only provide a useful connection where you watch if its own connection to the rest of the network is working too.

    Plan the backhaul first and check the connection indicator at the intended location.

    Depending on your home’s layout, you may need to move the node or run an Ethernet cable.

  • Assuming the maximum Wi-Fi speed is the speed you’ll get at your TV

    Walls, the connection between the nodes and bandwidth shared by multiple devices all affect the connection where you watch.

    Compare the connection at your streaming device with a measurement close to the router. Treat advertised wireless speeds as device specifications, not as a measure of what you’ll get in your home.

  • Assuming a single device is a complete multi-node set

    The pack size determines how many locations the included devices can cover.

    Before buying, check the model, pack size and contents of the specific option you’re considering.

    You may need an extra node to cover separate locations.

  • Expecting all router features in access point or bridge mode

    Some network features may be limited in these operating modes compared with router mode.

    Check the features you actually need against the documentation for the specific system and operating mode.

Key brands at a glance

TP-Link Deco

The Deco range includes standalone mesh systems. TP-Link describes the Deco BE25 as a dual-band Wi-Fi 7 model with 2.4 and 5 GHz bands and two 2.5 Gbit/s ports per unit.

  • TP-Link documents wired backhaul support and an access point mode for continuing to use an existing router.
  • According to TP-Link, some Deco app features for protection, parental controls and forwarding aren’t available in access point mode. Advertised wireless speeds don’t reflect a measurement through the walls in your home.

FRITZ! Repeater

FRITZ! Repeaters are particularly relevant if you already have a compatible FRITZ!Box. FRITZ! also describes how to connect the FRITZ!Repeater 1200 AX to the mesh via LAN.

  • According to FRITZ!, Wi-Fi settings can be carried over when a repeater joins a compatible FRITZ! mesh.
  • This doesn’t confirm the same mesh integration with any router from another manufacturer. Check your router model and setup requirements before buying.

eero

According to eero, the eero 6+ is a dual-band Wi-Fi 6 device with two Gigabit Ethernet ports and app-based setup.

  • eero describes the device as a router or as an extension of an existing eero network.
  • In bridge mode, Wi-Fi access remains available, but advanced network features are limited. The stated coverage area isn’t a guarantee of performance through thick walls.

devolo Magic 2 WiFi 6 next

According to devolo, the system combines Wi-Fi access points with a backhaul connection over your home’s electrical wiring, making it an alternative to consider alongside all-wireless mesh.

  • According to the manufacturer, the starter kit contains two adapters, one of which has Wi-Fi.
  • Claims of uninterrupted streaming aren’t a measurement of performance in your own electrical installation. Check which kit you need and how the connection works in your home.

Joybuy products for mesh Wi-Fi

The Joybuy products below are mesh systems or a mesh access point for providing Wi-Fi at several locations. Check whether your planned setup requires a wired backhaul or a compatible router.

TP-Link Deco BE22 (2-Pack) dual-band Wi-Fi 7 mesh system

TP-Link Deco BE22 (2-Pack) dual-band Wi-Fi 7 mesh system

For a mesh connection across several locations; position the nodes so that they can still connect to the main device.

Dual-band Wi-Fi 7; Gigabit Ethernet ports per unit; router and access point modes.

View product at Joybuy
TP-Link Deco M4 AC1200 (3-Pack) mesh system

TP-Link Deco M4 AC1200 (3-Pack) mesh system

For mesh coverage across several rooms; check that the number of units included matches the number of locations you need to cover.

Dual-band; two Gigabit LAN/WAN ports per unit; router and access point modes.

View product at Joybuy
TP-Link Deco X1500 AX1500 (2-Pack) Wi-Fi 6 mesh system

TP-Link Deco X1500 AX1500 (2-Pack) Wi-Fi 6 mesh system

For a mesh connection between several locations; check whether the units included will be enough for your home’s layout.

Dual-band Wi-Fi 6; two Gigabit Ethernet ports per unit.

View product at Joybuy
MERCUSYS Halo H25BE BE3600 (2-Pack) Wi-Fi 7 mesh system

MERCUSYS Halo H25BE BE3600 (2-Pack) Wi-Fi 7 mesh system

For a mesh connection across several locations; if connecting wirelessly, make sure the second unit is still within range of the first.

Dual-band Wi-Fi 7; three Gigabit ports per unit; setup via the MERCUSYS app.

View product at Joybuy
Ubiquiti UniFi U6 Mesh Wi-Fi 6 access point with PoE adapter

Ubiquiti UniFi U6 Mesh Wi-Fi 6 access point

For a location with a planned Ethernet uplink or to extend a compatible UniFi network; check the setup requirements first.

Gigabit Ethernet uplink; PoE adapter included. PoE power and UniFi Network are required for operation and management.

View product at Joybuy

Frequently asked questions

How can I tell whether mesh will help me stream a documentary?

Compare the connection at your streaming device with a measurement close to the router. Netflix recommends 5 Mbit/s for Full HD (1080p) and 15 Mbit/s for UHD (4K) on its service. These figures aren’t general minimum requirements for other services.

Where should I put a wirelessly connected mesh node?

Choose a spot where the node still has a decent connection to the main device and can reach the room where you watch. Check the system’s connection indicator; putting a node deep in a Wi-Fi dead zone won’t give it a working backhaul.

Can I keep my existing router with a new mesh system?

Yes, if the system has a suitable access point or bridge mode. TP-Link explains that Deco in access point mode gets its IP addresses from the existing router, but also notes that some app features won’t be available. eero lists limitations in bridge mode. Check the documentation for the specific model.

Do I need an individual frequency licence for private Wi-Fi in Germany?

Germany’s Federal Network Agency allocates the researched 2.4 and 5 GHz Wi-Fi bands for general use. Its ruling 76/2025 also provides for general allocation of the 6 GHz band. The conditions for each frequency band and the operating mode used still apply.