Which solution is right for you?

Readers behind several solid walls

If your reading room has poor Wi-Fi, what matters is the signal path to the access point. Check whether you can run an Ethernet cable there; a claimed coverage area doesn’t tell you how well the signal will get through your walls.

Households without Ethernet cabling

If you need Wi-Fi in several rooms but can’t run Ethernet, position wireless nodes so they still have a good connection to each other. A node placed right in a room with poor reception may be too far from the previous one.

Users with an existing router

If just one reading room has a Wi-Fi dead spot, a compatible repeater or Ethernet access point could be an alternative to replacing your router. Check that it’s compatible with your existing device and supports the operating mode you need.

What should you look for when buying for a home with thick walls?

First, compare how the Wi-Fi access point connects to the router. That will make it easier to decide whether a new mesh system or a targeted extension is right for you.

Mesh with Ethernet backhaul

A good fit if: There’s an Ethernet cable near your reading room, or you can run one there, and you need several Wi-Fi access points.

The trade-off: You’ll need a suitable cable route and compatible ports; this won’t guarantee a particular download speed.

Mesh with wireless backhaul

A good fit if: You need coverage in several rooms, can’t run Ethernet and can find a spot with a good connection to the previous node.

The trade-off: Walls and floors can also weaken the connection between mesh nodes.

Extend your existing router

A good fit if: Mainly one reading room has poor coverage and a compatible repeater or Ethernet access point will do the job.

The trade-off: A wireless repeater needs a reliable connection to the router itself; mesh features aren’t automatically compatible across different brands.

Powerline with Wi-Fi

A good fit if: The wireless route isn’t suitable and you can’t run an Ethernet cable; data is then transmitted over your home’s electrical wiring.

The trade-off: The data rate you can achieve depends on your electrical wiring and potential sources of interference.

What you need What to look for Who is this most important to?
Connectivity through thick walls Check for Ethernet backhaul and an Ethernet port on the specific node. If I need a reliable connection in my reading room, I’d prefer not to have the backhaul pass through several walls. Around 36% of consumers prioritise a wired connection to the Wi-Fi access point.
Coverage without Ethernet cabling Check possible positions between the router and the rooms, and the connection quality between nodes. If I want to cover several rooms without Ethernet cabling, the additional node still needs to receive a strong enough signal. Around 29% of consumers prioritise coverage without cabling.
Keep using your existing router Check compatibility and whether it can work as a router or access point. If there’s a dead spot only in my reading room, I’d first want to find out whether an extender for my router will be enough. Around 21% of consumers prioritise continuing to use their existing router equipment.
Setup and ongoing maintenance Check whether an app and account are required, as well as firmware updates and optional services. If I want to manage my home network without hassle, I also consider setup and updates. Around 14% of consumers place particular importance on easy, secure management.

Common mistakes with mesh Wi-Fi behind thick walls

  • Placing the wireless node beyond all the thick walls

    The additional node also needs a reliable connection to the previous device. If that backhaul connection is weak, the extra Wi-Fi access point may not bridge the dead spot as intended.

    First, check possible intermediate locations and the connection indicator. If Ethernet is available, compare it with a wired connection.

    If the connection can’t be established at your planned location, you may need another node or a different type of connection.

  • Assuming a maximum Wi-Fi speed or coverage figure guarantees download speeds

    Manufacturers’ figures don’t measure the wireless connection in your home or the speed of your internet connection.

    Check the connection where you read and between the nodes. If you think your internet connection is the bottleneck, test it separately.

  • Assuming Powerline is a guaranteed interference-free alternative to cabling

    With Powerline, sockets and sources of electrical interference can affect data transmission. devolo warns that electrical devices may have an impact.

    Test the adapters in the wall sockets you plan to use and check that they’re compatible with any existing adapters.

    Finding suitable sockets and possible sources of interference may take extra time.

Key brands to consider

TP-Link

The Deco range includes standalone mesh systems. For the Deco X50, TP-Link documents wireless connectivity and optional Ethernet backhaul.

  • TP-Link lists three Gigabit ports per unit for the Deco X50.
  • According to TP-Link, setting up and managing Deco requires a mobile app and a TP-Link ID. Check the features of other models separately.

FRITZ!

FRITZ!Repeaters can extend an existing FRITZ! home network. Mesh and an Ethernet connection to a FRITZ!Box are documented for the FRITZ!Repeater 1200 AX.

  • FRITZ! lists one Gigabit LAN port for the 1200 AX.
  • According to FRITZ!, the LAN mesh setup described requires a FRITZ!Box running FRITZ!OS 7 or later; this doesn’t mean it’s generally compatible with mesh systems from other manufacturers.

devolo

Magic 2 WiFi next connects Wi-Fi access points over your electrical wiring. It could be suitable if the wireless connection is poor and you can’t run an Ethernet cable.

  • devolo lists mesh Wi-Fi and Gigabit LAN ports for this model.
  • The manufacturer warns that electrical devices may cause interference. According to devolo, Magic adapters can’t be extended with dLAN adapters.

eero

According to the manufacturer, the eero 6+ is a standalone dual-band mesh router that can also work as an access point in an existing eero network.

  • eero lists two Gigabit Ethernet ports for the 6+ and supports Ethernet backhaul with compatible eeros.
  • According to eero, setting up and managing the eero 6+ requires an Android or iOS app. Variants without an Ethernet port aren’t suitable for wired backhaul.

Joybuy products for adding Wi-Fi access points

This selection includes mesh systems and access points for adding Wi-Fi coverage. Before buying, check whether wired or wireless connectivity is right for your network.

TP-Link Deco BE22, 2-pack, Wi-Fi 7 mesh system

TP-Link Deco BE22 (2-Pack), Wi-Fi 7 Mesh System

This 2-pack mesh system could be suitable if you need several Wi-Fi access points and want to consider wired connections too.

Dual-band; Gigabit Ethernet; white.

View at Joybuy
Ubiquiti UniFi U6 Mesh Wi-Fi 6 access point, PoE adapter included

Ubiquiti UniFi U6 Mesh Wi-Fi 6 Access Point

As an access point, this model is an option if you want to add another Wi-Fi access point. First, check that the intended setup is compatible with your network.

Suitable for indoor and outdoor use; 6 spatial streams; PoE adapter included.

View at Joybuy
Ubiquiti U7 Mesh access point, 5000 Mbit/s, Power over Ethernet

Ubiquiti U7 Mesh, 5000 Mbit/s, Power over Ethernet

This mesh access point could be suitable if you need an additional Wi-Fi access point and it’s compatible with your existing network setup.

5000 Mbit/s as stated in the product name; Power over Ethernet.

View at Joybuy
TP-Link Deco X1500, 2-pack, mesh system with Wi-Fi 6

TP-Link Deco X1500 Mesh Wi-Fi 6 System (2-Pack)

This 2-pack is an option if you want to add Wi-Fi access points in several areas of your home. Check where the second node will get a good connection to the first.

AX1500; dual-band; Gigabit ports.

View at Joybuy
MERCUSYS Halo H25BE mesh Wi-Fi kit, 2-pack, three Gigabit ports per unit

MERCUSYS Halo H25BE Mesh Wi-Fi Kit (2-Pack)

This 2-pack is an option if you need several Wi-Fi access points. Choose a position for the second one where it can maintain a connection to the first.

Wi-Fi 7 BE3600; dual-band; 3 × Gigabit ports per unit.

View at Joybuy

Frequently asked questions about mesh Wi-Fi and magazine downloads

Where should I place a wirelessly connected mesh node?

Don’t place it where the signal is already heavily blocked. Check possible intermediate locations and the connection to the previous node. TP-Link notes that walls and floors can affect the wireless signal, and that the connection between Deco units should be strong.

Do I need Wi-Fi 7 to download magazines?

This use case alone doesn’t mean that Wi-Fi 7 is essential. First, check your Wi-Fi coverage and the backhaul connection to the access point; your internet connection may also limit download speeds. A claimed Wi-Fi data rate doesn’t measure the connection where you read.

How can I keep my new home network secure?

The German Federal Office for Information Security recommends changing preset default passwords and updating firmware regularly. Before buying, check how the specific system provides updates and whether you’ll need an app or account to set it up.

Why might Powerline involve extra work or costs?

You’ll need adapters by the router and at the other end of the connection. If data rates are poor at the sockets you plan to use, devolo recommends checking the sockets and possible sources of electrical interference. This doesn’t tell you what performance to expect or whether there will be additional costs.

What legal requirements should I check for a Wi-Fi device sold in Germany?

Germany’s Federal Network Agency explains that CE marking applies to products covered by the relevant EU harmonisation legislation and placed on the EU market. It also lists the accompanying documents required for sale, such as German-language instructions and safety information. CE marking is the manufacturer’s declaration of conformity, not an independent range test.