Which solution is right for you?

Workshop attendees behind thick walls

At a fixed desk, it’s not just the signal to your laptop that matters: the connection between the mesh nodes also needs to work well. TP-Link describes Ethernet backhaul as a wired connection between Deco units.

Homes with a LAN cable already installed

If a cable reaches your workshop room, you can connect the node there by wire instead of relying on a wireless signal passing through the wall to link the nodes. TP-Link documents Ethernet backhaul for Deco systems.

People using an existing router

If you’d rather extend your network than replace it, check the operating mode and device compatibility first. TP-Link documents an Access Point mode for Deco, while FRITZ! describes a LAN bridge between the FRITZ!Repeater 1200 AX and a FRITZ!Box.

What should you look for when buying?

First, check your internet connection and the signal at your planned workshop spot. Then choose a backhaul option that suits your cabling, router and where you can place the node.

Consideration What to check before buying Who is this especially important for?
Wireless backhaul without LAN Check the connection at a possible midway location and the system’s backhaul indicator. If there’s no LAN at my workshop spot, I want to find a location where the mesh node still has a good connection to the router. Around 36% of consumers prioritise wireless coverage behind the wall.
Wired connection Check the Ethernet ports, operating mode and usable cable run to the node. If a LAN cable is available, I want to use it to connect the nodes and avoid relying on the crucial wireless link. Around 29% of consumers consider wired backhaul their main priority.
Extending an existing router Check router compatibility, the recommended operating mode and the features you need. If my existing router serves the rest of the household, I’d like to extend coverage to the workshop room without changing the whole setup. Around 21% of consumers prioritise adding to the equipment they already have.
Powerline as a backhaul option Check the connection at the intended plug sockets and, with VDSL, the stability of your connection. If neither LAN nor a suitable midway location for a wireless node is an option, I want to see whether the electrical wiring can provide the backhaul. Around 14% of consumers focus on this alternative.

Common selection mistakes

  • Placing the wireless node straight in the room with the weakest signal

    The node needs a decent connection to the rest of the mesh itself. Placing it in a dead spot won’t improve that connection.

    Try a midway location first. If you have a LAN cable, consider using it for wired backhaul instead.

    An unsuitable location may mean you need another node or have to install cabling later.

  • Assuming the stated Wi-Fi speeds reflect your workshop connection

    Building materials, interference, your device and your internet connection all affect the signal that actually reaches your workshop spot.

    Compare the connection at your planned location with one taken near the router, and check your broadband connection too. Don’t choose based on the combined wireless speed alone.

  • Assuming Powerline is an interference-free alternative

    Performance depends on your electrical wiring. Devolo notes that, in rare cases, Powerline can interfere with certain VDSL connections.

    Test the connection at the intended plug sockets and, if you have VDSL, keep an eye on the stability of your broadband connection.

    Troubleshooting your electrical wiring can take extra time and effort.

  • Replacing your existing home network with another router without checking first

    An Access Point mode or a compatible repeater can extend coverage to the room in question, but each comes with its own operating and compatibility requirements.

    Before you buy, note down your router model, the operating mode you want and the features you need to keep in your existing network.

    An unnecessary replacement can mean extra set-up work and leave your existing equipment unused.

Key brands at a glance

TP-Link

Deco systems can be used as a standalone mesh or in Access Point mode. Deco BE25 and Deco X20 are different model options.

  • TP-Link lists two 2.5 Gbit/s ports on each Deco BE25 unit and documents Ethernet backhaul for Deco systems.
  • According to TP-Link, some advanced app features aren’t available in Access Point mode. The stated wireless speeds don’t demonstrate how well a system will perform in a workshop behind thick walls.

FRITZ!

A FRITZ!Repeater can be a targeted way to extend an existing FRITZ! home network, rather than replacing it with a new mesh router.

  • FRITZ! documents a LAN bridge between the FRITZ!Repeater 1200 AX and a FRITZ!Box.
  • Before buying, check that your specific router and repeater combination and the planned connection route are suitable. The instructions aren’t an independent performance test.

eero

eero 6+ is described by the manufacturer as a Wi-Fi 6 mesh system. If you already have cabling, wired nodes may be an option.

  • According to eero, the eero 6+ has two Gigabit Ethernet ports, and the manufacturer recommends Ethernet backhaul if you have cabling in place.
  • You’ll need a mobile app to set up the eero 6+. eero Beacon and eero 6 Extender don’t have Ethernet ports.

devolo

Magic 2 WiFi 6 next combines a Powerline backhaul with Wi-Fi. It may be an option if you don’t have a LAN cable or a reliable wireless backhaul.

  • Using your electrical wiring can avoid relying on a wireless backhaul through the wall.
  • Suitability depends on your electrical wiring. Devolo notes that Powerline may cause interference with certain VDSL profiles.

Joybuy products on this topic

The products below include Deco mesh products and UniFi mesh access points for different types of connection. For wireless devices covered by EU harmonisation legislation and placed on the EU market by a manufacturer or importer, check the relevant CE marking and accompanying documentation. Germany’s Federal Network Agency highlights this requirement; the product name alone doesn’t prove compliance.

TP-Link Deco BE22 mesh system, 2-pack

TP-Link Deco BE22, 2-pack

This two-unit set may suit several rooms if you want to build a Deco mesh and check which operating mode works with your router.

Wi-Fi 7, dual-band and two Gigabit WAN/LAN ports per unit are listed. Router and Access Point modes are also mentioned.

View at Joybuy
Ubiquiti UniFi U6 Mesh Wi-Fi 6 indoor/outdoor access point

Ubiquiti UniFi U6 Mesh

This access point may suit a UniFi network if you’re looking for a mesh-capable access point rather than a complete mesh router kit.

Wi-Fi 6, six spatial streams and a Gigabit Ethernet uplink are listed. According to the product description, a PoE adapter is included. PoE and UniFi Network version 6.0.45 or later are specified for operation.

View at Joybuy
Ubiquiti U7 Mesh access point

Ubiquiti U7 Mesh

This mesh access point may suit you if you’re planning a UniFi network with a wired uplink and PoE power.

Wi-Fi 7, 2.4 and 5 GHz bands, and a 2.5 Gigabit Ethernet uplink are listed. The product name states 5000 Mbit/s. A suitable PoE or PoE+ injector, or a compatible switch, is required for operation.

View at Joybuy
TP-Link Deco M4 AC1200, single mesh unit

TP-Link Deco M4 AC1200, 1-pack

This single unit may be suitable for extending an existing Deco network. Check that you already have compatible Deco equipment.

Dual-band, Gigabit Ethernet ports and Ethernet backhaul are listed. The offer includes one unit; you’ll need additional hardware for more nodes.

View at Joybuy
TP-Link Deco M4 AC1200, 3-pack

TP-Link Deco M4 AC1200, 3-pack

This three-unit set may suit a Deco mesh covering several rooms, as long as the placement and backhaul work with your floor plan.

Dual-band, Gigabit ports on each unit and Ethernet backhaul are listed. Router and Access Point modes, as well as management through the Deco app, are also mentioned.

View at Joybuy

Frequently asked questions

Where should you place a wireless mesh node?

Don’t automatically put it in the room with the weakest signal: the node still needs a decent wireless connection to the rest of the mesh. Check the backhaul indicator at your planned location. If you have a LAN connection, you can connect it by wire on the other side of the wall instead.

Do I need to replace my existing router to use a Deco system?

No. According to TP-Link, a Deco system can extend an existing wired network in Access Point mode without creating its own subnet. Some advanced Deco app features aren’t available in this mode. Also check that your specific model and firmware are supported.

How can I check whether mesh can fix the bottleneck?

Compare the connection at your workshop spot with a test taken near the router, and check your internet connection too. Germany’s Federal Network Agency offers a broadband speed test for your connection. If the connection is already weak there, adding more Wi-Fi nodes won’t fix that bottleneck.

How much bandwidth does a virtual workshop need?

It depends on the platform you’re using and how you’re taking part. For webinar attendees watching a presenter with video switched on at 720p, Zoom specifies around 1.2–1.8 Mbit/s for downloads. Taking an active part or using other applications may require different speeds. This figure is neither a guarantee of an uninterrupted session nor a minimum requirement for a mesh product.

What extra tasks might come with changing routers?

If you manage your own router, you’ll need to set it up and keep its software up to date. Before buying, consider whether a compatible extension to your existing network could cover the workshop room without replacing the rest of your router setup.