Who is mesh Wi-Fi suitable for?

Students behind several walls

A reliable connection matters at a regular study spot. Having a possible cable route can affect whether you choose wireless mesh or a wired access point. The F.A.Z. Kaufkompass describes Ethernet as a way to connect mesh nodes by cable.

Homes without a cable route

If the nodes have to connect wirelessly, consider placing one somewhere that still has a good connection to the router. The study area also needs to be within reach from that spot.

Homes with a FRITZ!Box

If you want to keep using your existing router, first check whether a compatible repeater will do the job. FRITZ! explains how to add the FRITZ!Repeater 3000 AX to a mesh network over LAN with a FRITZ!Box running FRITZ!OS 7 or later.

What should you look for when choosing?

What you need What to look for when buying Who is this important for?
A stable connection through thick walls Check whether you can run an Ethernet cable to the node and whether the system supports Ethernet backhaul. If you need a reliable connection at your regular study spot, the key question is whether you can avoid the tricky wireless link. Around 36% of consumers put a wired connection to the study area first.
Wireless connection without cables Choose an intermediate location with a sufficiently good connection to the router; don’t set up the node in a dead zone. If running a cable isn’t an option, you need a spot where the mesh node can still reach the router and provide coverage to the study area. Around 29% of consumers prioritise wireless mesh without a cable route.
Extending your existing router Check the router model, software version and documented mesh or LAN bridge mode. If you already have a suitable router, you’ll want to know whether an additional access point is enough. Around 21% of consumers prioritise extending their existing router.
Lessons while others are using the home network Check the requirements of the lesson platform you use and test the connection both at your study spot and by the router. If other people are using your home network during lessons, it’s important to know whether your broadband connection and Wi-Fi can handle it. Around 14% of consumers prioritise being able to use the network at the same time as other household members.

Common buying mistakes

  • Assuming the advertised Wi-Fi data rate is the same as the connection at your study spot

    The wireless data rate alone doesn’t tell you how well the connection will work through walls or between mesh nodes in a particular location.

    First check the backhaul connection between the nodes and your broadband connection. Don’t treat advertised Wi-Fi speeds as a guarantee of uninterrupted video lessons.

  • Placing a wireless node in a room where it can’t get a strong enough connection to the router

    A node can only provide coverage to your study spot if its own connection to the router or the next node is working properly.

    Look for a suitable intermediate location or check whether Ethernet backhaul is an option.

  • Wiring Deco nodes without considering the operating mode

    TP-Link describes different wiring options for router and access point modes. An unsuitable network layout can cause problems.

    Choose the operating mode, then set up the wiring according to the relevant TP-Link instructions.

  • Overlooking optional services and power consumption

    Some additional features may require a subscription. CHIP reports slightly higher power consumption for the FRITZ!Repeater 3000 AX it tested.

    Check which features are available without an additional subscription for the model you’re considering, and what power consumption is specified for operation.

    According to the provider, additional online security and network management features for eero 6+ are available through a separate subscription. The power consumption reported for the tested FRITZ!Repeater 3000 AX applies to that model and shouldn’t be assumed to apply to other devices.

Key brands to consider

TP-Link

The Deco X50 range is an option if you’re looking for a standalone Wi-Fi 6 mesh system that may support Ethernet backhaul.

  • TP-Link lists three Gigabit ports per unit for the Deco X50, along with optional Ethernet backhaul.
  • How you wire the satellites depends on whether you’re using router or access point mode. Port specifications alone don’t tell you how well lessons will work in a spot behind a wall.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering as an extension for a compatible FRITZ!Box.

  • FRITZ! explains how to add it to a mesh network over LAN with a FRITZ!Box running FRITZ!OS 7 or later.
  • CHIP lists slightly higher power consumption and Gigabit LAN among the drawbacks of the model it tested. This assessment applies to the FRITZ!Repeater 3000 AX.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh option for homes considering multiple nodes and, potentially, Ethernet backhaul.

  • ASUS describes Ethernet backhaul for the ZenWiFi XD5 when Ethernet ports are available in the walls.
  • According to ASUS, using 160 MHz requires certain regional and device-specific conditions to be met.

Mesh Wi-Fi products at Joybuy

This selection includes mesh systems and extension nodes for study areas where you need to cover several rooms or add to an existing mesh network. For each model, check that the pack size, wiring and router mode suit your setup.

TP-Link Deco BE22 Wi-Fi 7 mesh system, 2-pack

TP-Link Deco BE22, Wi-Fi 7, 2-pack

This 2-pack is described as a mesh system for a home network with multiple units.

Wi-Fi 7 and dual-band; two Gigabit WAN/LAN ports per unit.

View at Joybuy
TP-Link Deco X1500 Wi-Fi 6 mesh system, 2-pack

TP-Link Deco X1500, Wi-Fi 6, 2-pack

This 2-pack is described as a mesh system for extending Wi-Fi across several rooms.

Wi-Fi 6 and dual-band; two Gigabit Ethernet ports per unit.

View at Joybuy
MERCUSYS Halo H1200G mesh system, 3-pack

MERCUSYS Halo H1200G, 3-pack

This three-unit set is described as providing Wi-Fi coverage across several rooms.

Dual-band AC1200; two Ethernet ports per unit. The product description mentions automatic roaming between units.

View at Joybuy
MERCUSYS Halo H25BE Wi-Fi 7 mesh system, 2-pack

MERCUSYS Halo H25BE, Wi-Fi 7, 2-pack

This 2-pack is described as a mesh system with multiple nodes.

Wi-Fi 7 BE3600 and dual-band; three Gigabit ports per unit.

View at Joybuy
TP-Link Deco M4 mesh extension node, 1-pack

TP-Link Deco M4, 1-pack

This single node is described as an extension for an existing Deco network and may be worth considering if you can run a cable.

Dual-band Wi-Fi 5, two Gigabit ports and Ethernet backhaul. The pack contains one mesh node; you’ll need additional units for multiple nodes.

View at Joybuy

Frequently asked questions

Where should I place a wireless mesh node for lessons behind thick walls?

Choose an intermediate location where the node can still get a sufficiently strong connection to the router and provide coverage to your study spot. If the wireless connection between nodes isn’t reliable there, check whether you can run an Ethernet cable.

Can I set up Deco nodes first and connect them by cable afterwards?

Yes. TP-Link recommends setting up the nodes on the same Wi-Fi network using the Deco app, then connecting them by cable. Make sure the network layout is suitable for router or access point mode.

How can I check whether the problem is with my Wi-Fi or my broadband connection?

Compare the connection at your study spot with a test by the router or over a wired connection. The desktop app for Breitbandmessung allows you to run individual tests. For formal evidence of a discrepancy with your contract, the Bundesnetzagentur describes a separate procedure involving 30 tests over three calendar days.

Does mesh Wi-Fi come with extra ongoing costs?

It depends on the model and the features you use. According to the provider, additional online security and network management features for eero 6+ are available through a separate subscription. CHIP reports slightly higher power consumption for the FRITZ!Repeater 3000 AX it tested.

What should I look for in a mesh Wi-Fi device in Germany?

If you’re buying a Wi-Fi radio device placed on the market in Germany, check that it meets the relevant conformity requirements. The Bundesnetzagentur lists the CE marking and required accompanying documents among these.