First, check whether the bottleneck is your internet connection or the Wi-Fi reaching the kitchen: adding mesh nodes won’t fix a slow broadband connection. If you have cables between floors, mesh with Ethernet backhaul is an obvious option. Without cables, it’s important to get a good connection between nodes and integrate your existing router in the right way.
Who could benefit from mesh Wi-Fi?
Cookery-class streamers with poor kitchen Wi-Fi
If you want to follow a cookery class right by the hob, both your internet connection and Wi-Fi reception in the kitchen matter. In devolo’s 2024 home network survey, 41.9% of respondents reported problems with video streaming.
Households with tricky connections between floors
You’ll need to weigh up whether you can run a network cable between floors or place mesh nodes at suitable points where they can establish a good wireless connection with each other.
Households with an existing router
If you want to keep your current router, check whether a compatible extender will do the job or whether a separate mesh system in Access Point mode would better suit your preferred network setup.
What should you look for when buying?
Mesh with Ethernet backhaul
A good fit if: you have usable network cables between floors and the kitchen has poor coverage despite a good internet connection.
Things to consider: The nodes need a suitable wired connection. Also check the ports and cabling required for your chosen operating mode.
Mesh with wireless backhaul
A good fit if: you don’t have cables between floors and possible intermediate locations still get a good signal from the router or next node.
Things to consider: Walls, ceilings and the position of each node can affect the connection between them. Advertised coverage areas don’t guarantee a good signal where you cook.
Extend your existing home network
A good fit if: you want to add to your existing router or FRITZ! home network.
Things to consider: A repeater extends an existing network, while a separate mesh system in Access Point mode provides Wi-Fi coverage. Check the features of the specific model and how it needs to be connected.
First, test your broadband connection, then check the Wi-Fi where you cook. Germany’s Federal Network Agency provides a broadband measurement tool for checking fixed-line connections.
| What you need |
What to check when buying |
Who is it important to? |
| Video streaming in the kitchen |
Check your internet connection and Wi-Fi separately; test reception right where you cook. |
If I want to follow a cookery class without interruptions while cooking, the signal in that exact spot matters. Around 36% of consumers would prioritise reliable video reception in the kitchen. |
| Backhaul without cables between floors |
Check possible intermediate locations have a power socket and good reception; don’t judge wireless backhaul solely by adding together the advertised wireless speeds. |
Without cables between floors, I want the nodes to connect well to each other too. Around 29% of consumers would prioritise the connection between nodes when buying. |
| Connecting cables and your router |
Check your network sockets, the ports on each unit, and whether you need Router or Access Point mode. |
If I want to keep using my existing cables or router, the connection type needs to suit my home network. Around 21% of consumers would prioritise using cables or integrating their router. |
| Set size and ongoing costs |
Check how many units are actually included; consider any additional services and their terms separately. |
I only want to pay for the units and features I really need for my home’s layout. Around 14% of consumers would prioritise choosing the right set size and avoiding unnecessary extra costs. |
Common buying mistakes
-
Assuming advertised coverage guarantees Wi-Fi in the kitchen
Manufacturers’ coverage or wireless speed claims can’t reliably predict how good the signal will be in a particular spot in your kitchen. Building materials, obstacles and the position of the devices all play a part.
Check your internet connection and Wi-Fi separately, then plan where to place the nodes based on reception around your home.
-
Placing a wireless node in a dead zone
The backhaul between mesh nodes also needs a good enough connection. A node placed where the signal is already very weak won’t automatically fix that connection.
Look for an intermediate location with good reception and check whether you can use a cable between floors.
-
Assuming a single unit and a multi-pack are the same
TP-Link offers the Deco BE25 range in different pack sizes. So the model name alone won’t always tell you how many units are included in a particular offer.
Before buying, check that the pack option listed matches the number of nodes you need.
-
Ignoring the connection mode of your new mesh system
TP-Link offers Router and Access Point modes for Deco. The right cabling depends on which device manages your home network.
Decide which router will do the routing before connecting everything, then set up the nodes according to the instructions for your chosen mode.
Key brands at a glance
TP-Link
The Deco range includes Wi-Fi 6 mesh systems such as the Deco X50, as well as a separate Wi-Fi 7 range such as the Deco BE25. Pack options vary.
- TP-Link describes an Access Point mode for Deco and optional Ethernet backhaul for the Deco X50.
- Check the pack size and cabling required for your chosen operating mode. Manufacturer claims don’t guarantee reception in a particular kitchen.
FRITZ!
The FRITZ!Repeater 3000 AX is mainly intended to extend an existing FRITZ! home network, rather than serve as a standalone router-and-satellite set.
- FRITZ! lists three wireless units and two Gigabit LAN ports for the repeater.
- The number of devices you need and how well they connect across multiple floors depend on your home and the locations available.
ASUS
The ZenWiFi XD5 is a Wi-Fi 6 mesh system. ASUS describes a three-pack option and Ethernet backhaul.
- An existing network cable may come in handy for backhaul.
- ASUS notes that some wireless features depend on your country and compatible devices.
Netgear
The Orbi RBK763S is a tri-band Wi-Fi 6 set comprising a router and two satellites.
- Netgear describes a dedicated connection between the router and satellites.
- Netgear includes one year of Armor; check the terms for continued use separately. The advertised coverage area is no substitute for testing the system in your own home.
Mesh Wi-Fi products at Joybuy
This selection includes mesh sets that can connect several living areas or extend an existing router. The right set size for three floors depends on your home’s layout and the wired and wireless connections available.
No image available
TP-Link Deco BE22 (2-pack), Wi-Fi 7, dual-band
This two-unit set is worth considering if you want to keep using an existing router in Access Point mode.
Wi-Fi 7; Gigabit WAN/LAN ports on each unit.
View at Joybuy
No image available
TP-Link Deco M4 AC1200 (3-pack)
This three-unit set is an option if you need several nodes and want to connect an existing router.
Dual-band Wi-Fi; Gigabit ports on each unit.
View at Joybuy
No image available
TP-Link Deco S4 AC1200 (3-pack)
This three-unit set could suit several living areas if you want to connect wired devices to mesh units.
Dual-band Wi-Fi; two Gigabit ports on each unit.
View at Joybuy
No image available
MERCUSYS Halo H1200G AC1200 (3-pack)
This three-unit set is an option if you’re looking for mesh coverage across several living areas; actual coverage depends on where you place the units in your home.
Dual-band Wi-Fi; two Ethernet ports on each unit.
View at Joybuy
No image available
MERCUSYS Halo H25BE (2-pack), Wi-Fi 7 BE3600
This two-unit set is an option if you want mesh with wired ports on each unit.
Three Gigabit ports on each unit; MU-MIMO and WPA3.
View at Joybuy
Frequently asked questions
Will mesh help if my internet connection is already too slow for a cookery class?
No. Mesh won’t fix a bottleneck with your internet connection. Check your fixed-line broadband speed separately from your Wi-Fi; Germany’s Federal Network Agency provides a broadband measurement tool for this. Then test the connection where you cook too.
How do I connect Deco units using cables between floors?
The cabling for Deco depends on the operating mode you choose. TP-Link describes different connection options for Router and Access Point modes. Set up the units according to the manufacturer’s instructions first, and check which device should manage the routing before connecting them by cable.
What should I check after setup?
Check each node’s connection and reception where you cook. Also keep the firmware up to date; TP-Link notes that available features may vary by model and software version.
What should I look for in a mesh Wi-Fi device for Germany?
Check the specific version of the device against its product documentation. For wireless products, Germany’s Federal Network Agency lists CE marking, product identification, manufacturer details, German-language instructions and a declaration of conformity among the points to check. The model name alone doesn’t confirm that the specific version on offer meets these requirements.