Who might need mesh Wi-Fi in this situation?

Students with a Wi-Fi dead spot in their study area

If you download course files on a different floor from your router, you need a reliable connection there. What matters is the connection in your study area and the link back to the next mesh node, not just the advertised overall speed. The F.A.Z. Kaufkompass recommends considering a wired backhaul as a possible option.

Homes with network sockets between floors

Existing network sockets may be suitable for connecting the nodes. Check that the system you’re considering supports Ethernet backhaul and that the sockets can be used at the locations you need.

Homes with an existing FRITZ!Box

If you want to keep your router and start by improving coverage on a poorly served floor, you could consider a compatible repeater. Whether that’s enough depends on the connection and its location; FRITZ! describes the Repeater 3000 AX as suitable for joining a FRITZ! mesh.

What should you look for when buying?

Buying priority What to check Who it matters most to
Connection in the study area Check the connection in your study area and at possible intermediate locations; choose the number of nodes accordingly. If I download course files on a different floor, I need a stable connection there. Around 36% of consumers are likely to have this as their main priority.
Link between floors Check whether existing network sockets are connected; without cables, test wireless node locations or Powerline adapters in the intended sockets. If I’m concerned about the connection between floors, I want to use existing cables or know whether a wireless link will work. Around 29% of consumers prioritise this backhaul.
Keeping your existing router Check the router model, connection and intended operating mode; don’t confuse FRITZ! mesh with Deco in Access Point mode. I want to keep my existing router and find a compatible way to extend it, rather than changing my network unnecessarily. Keeping the existing router is likely to be the top buying priority for around 21% of consumers.
Keeping an eye on the total cost Consider the pack size, any extra nodes or adapters you may need, and optional services. If I want to limit my overall spending, I compare the set I actually need rather than just the maximum Wi-Fi speeds. Around 14% of consumers are likely to put total cost first.

Which buying decisions could turn out to be a mistake?

  • Assuming the total Wi-Fi speed is the same as your upstairs download speed

    The actual connection in your study area also depends on your internet service and the link between the nodes. A TP-Link Deco BE25 test under optimal conditions is not a measurement for a particular home.

    Assess your internet connection, the link between floors and the connection in your study area separately.

  • Putting a wireless node directly in a Wi-Fi dead spot

    The node itself also needs a sufficiently strong connection to the rest of the mesh. So you may find yourself needing an extra node in a poor location without improving the backhaul.

    First, find a suitable intermediate location or check whether you can use Ethernet.

    An extra node can add effort and cost without solving the connection problem.

  • Assuming Wi-Fi 7 on the Deco BE25 means it has a 6 GHz band

    Independent testing by CHIP describes the Deco BE25 as a dual-band model without a 6 GHz band. So, for this model, the Wi-Fi standard alone doesn’t tell you whether it has an additional frequency band.

    Check the frequency bands supported by the exact model if 6 GHz is important for your devices.

  • Assuming Powerline is a reliable, interference-free alternative to network cabling

    How well it works depends on your electrical wiring and the sockets you use. devolo also highlights possible interference from electrical devices and certain VDSL connections.

    Test the connection using the sockets you intend to use. If you have VDSL problems, compare the connection with Powerline switched off.

Key brands at a glance

TP-Link

The Deco range includes mesh systems with wireless or Ethernet backhaul. For the Deco BE25, check the pack size and frequency bands against your specific needs.

  • TP-Link lists two 2.5 Gbit/s ports per BE25 node and wired backhaul.
  • CHIP’s test points out that the BE25 is dual-band, has no 6 GHz band and doesn’t include a built-in modem. Manufacturer speed claims are not measurements across three floors.

FRITZ!

The FRITZ!Repeater 3000 AX can extend an existing FRITZ! mesh wirelessly or via LAN.

  • FRITZ! lists tri-band Wi-Fi 6, two Gigabit LAN ports and a five-year manufacturer’s warranty.
  • The repeater is not a standalone replacement for your internet connection. Its usefulness and integration with your mesh depend on your existing network and how it’s set up.

ASUS

ZenWiFi XD5 is a Wi-Fi 6 mesh range with AiMesh support, and may be worth considering if you have suitable network sockets between floors.

  • ASUS describes Ethernet backhaul and compatibility with AiMesh-compatible routers.
  • Advertised coverage areas don’t prove that a particular three-storey house will be covered. Some Wi-Fi 6 features require compatible devices.

devolo

Magic 2 WiFi 6 next combines Powerline with mesh Wi-Fi; according to the manufacturer, the multi-room kit is available with three adapters.

  • Powerline could be an option if you don’t have network cables and a wireless connection isn’t practical.
  • Sockets, electrical interference and certain VDSL connections can affect performance. Check how it works in your home.

eero

eero 6+ is a Wi-Fi 6 mesh system managed through the eero app; the provider also offers three-packs.

  • The system is set up using the eero app.
  • According to the provider, additional online security and network management features are available separately. Advertised coverage areas don’t prove that the system will cover your specific floors.

Mesh Wi-Fi products from Joybuy

The Joybuy products below are mesh systems for multiple rooms and floors. Whether two or three nodes are right for you depends on your layout, where your router is and the connection between the nodes.

TP-Link Deco BE22, 2-pack, dual-band Wi-Fi 7 mesh system

TP-Link Deco BE22 (2-pack)

Could be suitable for a two-node mesh network; check that the wireless connection works at the planned locations and covers the floors you need.

Dual-band Wi-Fi 7; Gigabit Ethernet; 2-pack.

View at Joybuy
TP-Link Deco M4, 3-pack, dual-band AC1200 mesh system

TP-Link Deco M4 (3-pack)

Three nodes give you several possible placement options; choose locations where the connection back to the router works.

Dual-band; AC1200; Gigabit ports.

View at Joybuy
TP-Link Deco S4, 3-pack, dual-band AC1200 mesh system

TP-Link Deco S4 (3-pack)

The three-pack is worth considering when planning coverage across several floors; the number of nodes alone doesn’t guarantee a connection in your study area.

Dual-band; AC1200; Gigabit ports.

View at Joybuy
MERCUSYS Halo H1200G, 3-pack, dual-band AC1200 mesh system

MERCUSYS Halo H1200G (3-pack)

Could suit several rooms or floors if you can find suitable locations for the three nodes with a working backhaul.

Dual-band; AC1200; 3-pack.

View at Joybuy
MERCUSYS Halo H25BE, 2-pack, dual-band Wi-Fi 7 mesh system

MERCUSYS Halo H25BE (2-pack)

The two-pack could be a good fit if two nodes are enough for the areas you need to cover; check the connection in your study areas and between the nodes.

Dual-band Wi-Fi 7 BE3600; three Gigabit ports per unit.

View at Joybuy

Frequently asked questions

How can I tell the difference between a slow internet connection and poor Wi-Fi?

First, check your internet speed separately from your Wi-Fi, for example by running a wired test at the router. Then compare the connection in your study area with the link between the mesh nodes. A mesh system can’t make a slow internet connection faster.

Do I always need to buy three mesh nodes for a three-storey house?

No. The number you need depends on where your router is, your layout, your study area and the quality of the backhaul. First check the planned locations: an extra wireless node in a spot with no usable signal won’t automatically solve the problem.

Can I keep my existing FRITZ!Box?

Yes, if the extension is compatible with your specific setup. FRITZ! describes the Repeater 3000 AX as designed for its own mesh and a LAN connection to the FRITZ!Box; TP-Link offers an Access Point mode for Deco behind an existing router. These operating modes are not the same.

What ongoing costs should I check before buying?

Compare how many nodes you need and factor in any cables or extra adapters. According to the provider, certain additional online security and management features for eero 6+ are available separately; they aren’t essential to your basic decision about Wi-Fi coverage.

Do I need an individual frequency allocation in Germany for ordinary home Wi-Fi?

For Wi-Fi in the 2.4 and 5 GHz bands, the Bundesnetzagentur lists the frequencies as generally allocated. This means no individual frequency allocation is required for use under the relevant general allocation; you must still comply with the applicable conditions of use. For 6 GHz, Notice 76/2025 is relevant and repeals Notice 12/2025.

What should I check regarding compliance for a Wi-Fi device?

The Bundesnetzagentur lists CE marking and the required accompanying documentation as obligations when placing these products on the market. Among other things, retailers should check the marking and any necessary German-language documents. A CE mark does not prove the Wi-Fi range or that the device will connect successfully across your floors.