Who can benefit from mesh Wi-Fi for video calls through thick walls?

Video calls in a room with poor signal

If your connection drops out at your usual workstation behind thick internal walls, assess your internet connection and Wi-Fi separately. The Federal Network Agency offers a tool for measuring internet speed. For a wireless node, the connection between the main unit and the node’s position also matters.

Homes with an Ethernet connection at the workstation

An existing network cable could provide a connection close to your meeting spot. Check whether the specific device supports Ethernet backhaul or a suitable access point mode. ASUS documents Ethernet backhaul support for the ZenWiFi XD5.

Homes without a cable route

Without a network cable, a wireless node can only work if its position still has a usable connection to the main unit. Powerline may offer another way to connect, but you’ll need to test it with the sockets you intend to use. devolo warns that electrical devices can cause interference.

Which mesh Wi-Fi features should you prioritise?

Start by comparing the connection by your router with the one at your meeting spot. Then you can decide more easily whether a cable route, a well-placed wireless node or a Powerline connection tested in your home could work for you.

What you need What to look for when buying Who should consider it?
Connection at your meeting spot Compare the internet connection by the router with the Wi-Fi at your workstation, and check the signal where you plan to put the node. If I make calls from a fixed spot behind thick walls, I need a stable connection there. Around 33% of consumers put signal at their meeting spot first.
Backhaul between nodes Check for LAN backhaul and a cable route. Without a cable, test possible wireless node positions or the Powerline sockets you plan to use. Without a cable route, I want to know whether wireless or Powerline can connect to the main unit. Around 27% of consumers prioritise a reliable backhaul.
Router compatibility Check that your router model, mesh range and the selected node’s operating mode are compatible. If I want to keep my router, the extension must work with the features it actually supports. Around 20% of consumers put compatibility first.
Internet connection and overall requirements Assess your internet upload and download speeds separately from Wi-Fi, and check what’s included in the offer, such as the number of nodes, cables and adapters. I want to rule out a bottleneck with my internet connection first and choose only the equipment I need. Around 20% of consumers focus on checking their connection and overall requirements.

Which mesh Wi-Fi buying mistakes should you avoid?

  • Putting the second wireless node right in the dead zone

    The node needs a reliable connection to the main unit itself. Good signal between your laptop and the node isn’t enough if the backhaul is weak.

    Check the signal where you plan to put the node. If there’s a cable route, compare it with the option of using LAN backhaul.

  • Assuming the advertised Wi-Fi speed is the same as your internet speed

    Your internet connection and the individual Wi-Fi links are separate potential bottlenecks. A larger mesh system won’t fix a bottleneck that’s already present at the router.

    Assess your internet upload and download speeds separately from the connection at your meeting spot.

  • Assuming Powerline is an interference-free alternative to a cable

    Electrical devices and certain sockets can affect transmission over your mains wiring. Powerline manufacturer devolo also highlights this.

    Test the connection using the wall sockets you plan to use, and follow the manufacturer’s guidance on extension leads.

  • Confusing Wi-Fi compatibility with shared mesh functionality

    A repeater may work with a router without both devices supporting the same manufacturer-specific mesh features.

    Check the router model, firmware, mesh range and, where relevant, whether the specific device supports access point mode.

Which brands offer suitable solutions?

FRITZ!

FRITZ!Repeaters are one option for extending a compatible FRITZ!Box mesh network. The manufacturer lists three wireless units and two Gigabit LAN ports for the FRITZ!Repeater 3000 AX, and one Gigabit LAN port for the 1200 AX.

  • If you already have a FRITZ!Box network, a compatible repeater could be the extension you need.
  • A wirelessly connected repeater still needs a usable connection to the main unit where it’s placed. Working as a repeater with another router doesn’t automatically mean both devices share mesh management.

TP-Link

Deco systems connect multiple nodes in a single, centrally managed network. TP-Link documents Ethernet backhaul support for Deco.

  • A usable cable route can be an alternative to a wireless backhaul between nodes.
  • Choose a set size, operating mode and connection route that suit your existing router and available cable route.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh system. ASUS lists Ethernet backhaul support, as well as router, access point and AiMesh node modes.

  • These operating modes give you options to suit your existing router and cable route.
  • AiMesh requires compatible ASUS devices, and the advertised Wi-Fi performance doesn’t measure the connection at your specific workstation behind a thick wall.

devolo

According to the manufacturer, the Magic 2 WiFi 6 next Starter Kit uses Powerline to connect Wi-Fi at a distant location to your home network.

  • Powerline could be an option if you don’t have a suitable wireless node position or an Ethernet cable route.
  • devolo warns that certain sockets and electrical devices can affect transmission. Test the sockets you plan to use in your home.

Joybuy products for mesh Wi-Fi at your meeting spot

The Joybuy products below include mesh systems and access points for adding extra nodes. Depending on the model, check that the wireless or wired connection, operating mode and your existing network are all compatible.

TP-Link Deco BE22, 2-pack mesh Wi-Fi system

TP-Link Deco BE22 (2-pack)

This two-node set could suit you if you want to create a Deco mesh with multiple units. The connection between the nodes depends on the connection method you choose and where you place them.

  • Wi-Fi 7, dual-band
  • Gigabit Ethernet
  • Router and access point modes
View at Joybuy
Ubiquiti UniFi U6 Mesh access point

Ubiquiti UniFi U6 Mesh

This access point could be an option for adding a node to a compatible UniFi network. First, check that your existing network works with the management setup you have in mind.

  • Wi-Fi 6
  • Gigabit Ethernet
  • PoE adapter included, according to the product name
  • For indoor and outdoor use, according to the product name
  • 6 spatial streams
View at Joybuy
Ubiquiti U7 Mesh access point with Power over Ethernet

Ubiquiti U7 Mesh

This access point could suit you if you want to extend a compatible UniFi network and can provide a wired connection for both data and power.

  • Wi-Fi 7
  • 5000 Mbit/s, according to the product name
  • 2.5 Gigabit Ethernet with PoE, according to the product description
  • Compatible PoE or PoE+ equipment required
  • UniFi Network environment required for mesh use
View at Joybuy
TP-Link Deco X1500, 2-pack mesh Wi-Fi system

TP-Link Deco X1500 (2-pack)

This two-node set could suit a mesh setup covering several areas. Check whether the planned wired or wireless route will work for the second node’s location.

  • Wi-Fi 6, AX1500, dual-band
  • Two Gigabit Ethernet ports per unit, according to the product description
View at Joybuy
TP-Link Deco M4, single mesh Wi-Fi unit

TP-Link Deco M4 (1-pack)

This single unit could suit you if you want to extend an existing Deco network or connect a node by cable. You’ll need another node to create a mesh with multiple Deco units.

  • AC1200, dual-band
  • Two Gigabit ports
  • Ethernet backhaul
  • Router and access point modes
View at Joybuy

Frequently asked questions about mesh Wi-Fi for video calls

How can I tell whether I need mesh Wi-Fi or a better internet connection?

Compare measurements taken near your router with the connection at your meeting spot. The Federal Network Agency’s broadband measurement tool can check your internet connection speed. If your upload speed is already too low by the router, particularly for what you need, an extra mesh node won’t fix that bottleneck. Zoom lists bandwidth requirements according to call type and video quality, not a required class of mesh device.

Where should I set up a Deco node with LAN backhaul?

First, set up the Deco units on the same network as instructed by TP-Link, then connect them by cable. In router mode, TP-Link says the satellite should connect to the LAN side of the main Deco or to a switch connected to it. TP-Link describes other connection options for access point mode. You can then check the app to see which backhaul is in use.

What should I do to keep my Wi-Fi secure after setup?

The German Federal Office for Information Security recommends keeping firmware up to date and protecting your router administration and Wi-Fi with suitable passwords. Check how firmware updates and settings are managed on your specific device.

Which extra equipment and service terms should I check before buying?

Check whether the offer includes a single node or the set you need, and whether you’ll need extra nodes, cables or adapters. Also check the warranty, updates and any paid extra features included with the specific offer.

What should I know about using Wi-Fi on 2.4, 5 and 6 GHz in Germany?

The Federal Network Agency lists general frequency allocations for Wi-Fi at 2.4 and 5 GHz. For devices using 6 GHz, the general allocation in Vfg. 76/2025 applies; it revokes Vfg. 12/2025. This doesn’t make it possible to determine in general whether a particular device and its settings meet all the conditions of use.