Who might benefit from mesh Wi-Fi?

Learners with unstable video calls

If you’re downloading course materials while taking part in a video call, first check the internet connection and the Wi-Fi at your study space separately.

Households with a study space further away

If your workspace is behind several walls or on another floor, what matters is how the extra node can connect to the router – perhaps via existing LAN cabling.

Households with an existing router

If you want to extend your coverage rather than rebuild your entire network, first check which mesh features your existing router supports.

What should you look for when buying?

The percentages below are a rough guide for consumers weighing up mesh Wi-Fi for course downloads and simultaneous video calls. Each figure highlights the main buying priority.

Priority What to check when buying Who it matters most to
Video call stability Compare the connection near the router with the one at your study space; check the internet connection and Wi-Fi separately. If I need to stay on a video call while downloading course materials, the connection at my study space comes first. Around 36% of consumers would consider call stability their top priority.
Connection to the study space Check the locations and any existing LAN ports. If you’re using a wireless connection, also consider where to position the node. If my study space is behind walls or on another floor, I need a suitable connection between the router and the node. Around 29% of consumers would prioritise coverage in a study space further away.
Compatibility with your existing router Check your router model and software version. For a new system, check the operating mode supported by the specific version. If I want to keep using my existing router, it’s important to know whether the extra node or new system is compatible. Around 21% of consumers would make keeping their existing router a priority.
What’s included and what else you might need Compare the number of Wi-Fi locations you need to cover with the number of units and adapters included. If I need to cover several rooms, I want to plan for the right number of devices from the outset. Around 14% of consumers would consider the set contents and potential add-on purchases their top priority.

Common buying mistakes

  • Assuming combined maximum Wi-Fi speeds equal the speed at your study space

    Manufacturers’ figures for combined Wi-Fi data rates don’t automatically reflect the connection at your study space. The actual route the data takes and the location also play a part.

    First, check your internet connection. Then compare the connection near the router with the one at your study space. Only then decide what kind of connection you need between the mesh nodes.

    An unnecessary system replacement may not solve the problem if your internet connection is actually the bottleneck.

  • Putting a wireless node where reception is already very poor

    Walls and ceilings can also weaken the wireless connection between the extra node and the rest of the mesh network.

    Check where to position the node and how well the units connect before choosing a set size. Take any existing LAN ports into account.

    Depending on your setup, you may later need an extra node or a cable connection.

  • Treating repeaters, mesh sets and Powerline kits as interchangeable

    A repeater extends an existing network, while a complete mesh set and a Powerline kit have different requirements. Starter and multi-room kits may also contain different numbers of adapters.

    Before buying, make a note of your router, the Wi-Fi locations you want to cover and what’s included in the specific pack.

    You may need to buy extra nodes, adapters or cables later if they’re not included.

Brands to consider

FRITZ!

One option for households that already have a compatible FRITZ!Box and mainly want to improve coverage in a study space further away.

  • FRITZ! explains how to add the FRITZ!Repeater 1200 AX to a mesh network and set up a LAN bridge.
  • The features available depend in part on the software version of the devices involved. A repeater doesn’t replace an internet router.

TP-Link

The Deco X50 and Deco X50 Pro are standalone mesh options with different wired connections.

  • TP-Link lists three Gigabit ports per unit for the Deco X50, as well as optional Ethernet backhaul.
  • According to TP-Link, the Deco X50 Pro has two 2.5 Gbit/s ports. These models aren’t interchangeable, and advertised maximum Wi-Fi speeds aren’t measurements taken at your study space.

ASUS

The ZenWiFi XD5 could be a good choice for a new mesh network, especially if you can use LAN connections between the planned nodes.

  • ASUS describes Ethernet backhaul and lists router, access point and AiMesh node modes for the XD5, among others.
  • Check the specific pack, the available ports and the operating mode you need.

devolo

The Magic 2 WiFi 6 next combines Powerline with Wi-Fi at the receiving point. It could be an option for rooms that are difficult to reach wirelessly or via LAN.

  • According to devolo, the Starter Kit and Multiroom Kit contain different numbers of adapters.
  • The product information doesn’t guarantee a particular data rate over the electrical wiring in any individual home.

Google

Nest Wifi Pro is a multi-node Wi-Fi 6E system for setting up a new Wi-Fi network.

  • Google describes a system with 2.4, 5 and 6 GHz bands, as well as automatic quality of service for video calls.
  • These are manufacturer claims, not independent proof of uninterrupted calls. The stated data rates are combined maximum speeds.

Joybuy products

The products below include multi-unit mesh systems for providing Wi-Fi in different locations. Before buying, check the compliance documents for the specific device version: the product name and model number alone don’t confirm compliance.

TP-Link Deco BE22, 2-pack, mesh Wi-Fi 7 system

TP-Link Deco BE22, 2-pack, mesh Wi-Fi 7 system

This two-unit set is designed for a mesh setup across multiple locations.

Dual-band; two Gigabit WAN/LAN ports per unit; router and access point modes.

View at Joybuy
TP-Link Deco M4, 3-pack, AC1200 mesh Wi-Fi system

TP-Link Deco M4, 3-pack, AC1200 mesh Wi-Fi system

Three units are designed to create a mesh network across several rooms.

Dual-band; AC1200; two Gigabit LAN/WAN ports per unit.

View at Joybuy
TP-Link Deco X1500, 2-pack, AX1500 mesh Wi-Fi 6 system

TP-Link Deco X1500, 2-pack, AX1500 mesh Wi-Fi 6 system

This two-unit set is designed for a mesh network across several locations in your home.

Dual-band; Wi-Fi 6; two Gigabit ports per unit.

View at Joybuy
TP-Link Deco S4, 3-pack, AC1200 mesh Wi-Fi system

TP-Link Deco S4, 3-pack, AC1200 mesh Wi-Fi system

Three units are designed for a mesh network with Wi-Fi in several locations.

Dual-band; AC1200; two Gigabit ports per unit.

View at Joybuy
MERCUSYS Halo H1200G, 3-pack, AC1200 mesh Wi-Fi system

MERCUSYS Halo H1200G, 3-pack, AC1200 mesh Wi-Fi system

This three-unit set is designed for a mesh network across multiple locations.

Dual-band; AC1200; two Ethernet ports per unit.

View at Joybuy

Frequently asked questions

Can a mesh system make up for a slow internet connection when downloading and making video calls?

No. A mesh system distributes your existing internet connection around your home, but it doesn’t increase your connection speed. Compare the connection near the router with the one at your study space. To check your fixed broadband connection, the Bundesnetzagentur provides a broadband measurement tool.

Where should I put an extra node if I don’t have a LAN cable?

Place it somewhere that still has a good connection to your existing network, rather than behind all the walls that could interfere with the signal. Then check the connection at your actual study space, as walls and ceilings can weaken reception.

What should I check after setting up a FRITZ! mesh network?

Check that all the intended nodes are connected and that their software versions support the features you want. For a specific feature that reassesses multiple repeaters, FRITZ! specifies FRITZ!OS 8.10 on the FRITZ!Box and all the repeaters involved. This isn’t a general minimum version for every mesh network.

Does the Wi-Fi 6E label prove that a device is suitable for use in Germany?

No. The Wi-Fi 6E label alone doesn’t prove that a specific version of a device on offer complies with the relevant requirements. For the 5945–6425 MHz range, the Bundesnetzagentur lists general assignment 76/2025 and has repealed the earlier order 12/2025. Also check the documents for the specific radio equipment version.