First, measure your internet connection over Ethernet and compare it with the Wi-Fi connection at the workshop locations. Mesh can improve weak Wi-Fi coverage, but it can’t fix an internet connection that’s too slow or unstable. If your connection is up to the job, the key factors are choosing suitable node locations, ensuring a good connection between the nodes and checking compatibility with your existing router.
Who might benefit from mesh Wi-Fi?
People in rooms with Wi-Fi dead spots
If you’re sitting further away from the router during a workshop, compare the Wi-Fi connection at your location with the internet connection via Ethernet at the router. This will help you work out whether the issue is more likely to be Wi-Fi coverage or your internet connection.
Households with simultaneous video calls
If several people are on video calls at the same time, check both your internet connection and the Wi-Fi connection at each workspace.
Households with an existing internet router
If you want to extend coverage to additional rooms, check first whether the new system will work with your router and whether different mesh product ranges are actually compatible.
What should you look for when buying?
First, measure the connection over Ethernet and at the workshop locations. If your internet connection is fast enough, compare coverage, the connection between nodes and router integration.
| What matters |
What to look for |
Who is this important to? |
| Wi-Fi coverage |
Check the connection at the actual workshop locations and consider where you could place the nodes. If you already have cabling, Ethernet backhaul is also worth comparing. |
If I’m taking part in a workshop in a room with weak Wi-Fi, I want to find out whether the problem is the wireless coverage rather than the internet connection. Around 33% of consumers put coverage at their workspace first. |
| Simultaneous video calls |
Compare the router’s Ethernet connection with the Wi-Fi at each workspace, ideally while there’s similar activity on the network. |
When several calls are happening at once, I want to check the internet connection and Wi-Fi separately rather than replacing the wrong component in a hurry. Around 25% of consumers prioritise simultaneous video calls. |
| Router integration |
Check which product ranges are explicitly supported and which operating mode you need. A shared brand name doesn’t automatically mean that two systems will form a single mesh network. |
If I want to keep my existing router, I check compatibility and which features are available in access point mode. For around 25% of consumers, integration with their existing router setup comes first. |
| Choosing the right system size |
Compare the number of nodes with the rooms that need coverage, and check which features you’ll actually use. |
I want to choose only the number of nodes and features needed for my workshop rooms. Around 17% of consumers prioritise a system sized to their needs. |
Common buying mistakes
-
Buying mesh when the bottleneck is your internet connection
Your available internet speed and your Wi-Fi coverage are two different things. Better wireless coverage won’t fix an internet connection that’s already too slow or unstable over Ethernet.
First, compare a wired speed test at the router with the connection at the workshop locations.
-
Assuming “mesh” means all product ranges are compatible
TP-Link says Deco and Archer/OneMesh won’t form a shared mesh network. If you already have another system, check the specific combination is supported too.
Before you buy, check the product range and intended operating mode for your devices.
-
Comparing only the advertised Wi-Fi speed
A top speed on its own doesn’t tell you whether the internet connection, the link between nodes and the Wi-Fi connection at your workshop location will suit the way you use them.
Compare node locations, backhaul and available ports with your rooms in mind. Don’t treat manufacturers’ figures as a measure of video-call performance in your home.
-
Taking advanced features for granted
The features available can vary between systems and operating modes.
Before you buy, check which security and management features are included and which ones you actually need.
Brands to consider
FRITZ!
The FRITZ!Mesh Set 2700 is worth considering if you want to compare a mesh system used behind a FRITZ!Box or another router. Choose a set size to suit the rooms you need to cover.
- FRITZ! says the set can also be used with a router from another brand.
- That doesn’t automatically mean the set will form a single mesh network with the Wi-Fi from another router.
TP-Link
The Deco range is worth considering if you want to compare a mesh system used behind an existing router or with Ethernet backhaul.
- TP-Link says the Deco X50 supports optional Ethernet backhaul and can be used in access point mode.
- According to TP-Link, Deco and Archer/OneMesh don’t form a shared mesh network. Some router features aren’t available when Deco is in access point mode.
ASUS
The ZenWiFi XD5 is an option if you’re comparing a Wi-Fi 6 mesh system with Ethernet backhaul.
- ASUS documents Ethernet backhaul for the XD5 when suitable Ethernet connections are available.
- A 2024 connect test notes that the XD5 has a limited selection of ports. This limitation applies to this model, not to all ASUS systems.
eero
The eero 6+ is worth considering if you want to compare app-guided setup and the features you need.
- eero describes a setup process guided by an app.
- According to eero, some advanced security and management features are available as separate add-ons.
devolo
The WiFi 7 Mesh BE6500 is worth considering if you’re comparing sets with different numbers of nodes and ports for wired devices.
- devolo’s German product page lists 2-piece and 3-piece sets, along with a 2.5 Gbit/s port and three Gigabit Ethernet ports.
- These model specifications aren’t a measure of performance during simultaneous workshops.
Joybuy products for multiple rooms
These mesh systems are designed for households that need coverage across several areas and, depending on the model, may want to keep using an existing router.
No image available
TP-Link Deco BE22 (2-pack), mesh Wi-Fi 7 system, dual-band, Gigabit Ethernet
An option for covering several areas if you want to compare a mesh system used behind your existing router.
Product specifications: Wi-Fi 7, dual-band, Gigabit Ethernet.
View at Joybuy
No image available
TP-Link Deco X1500, mesh Wi-Fi 6 system AX1500, 2-pack, dual-band, Gigabit ports
An option if you want to cover several rooms with a mesh system and connect wired devices.
Product specifications: Wi-Fi 6, AX1500, dual-band, Gigabit ports.
View at Joybuy
No image available
TP-Link Deco M4, AC1200 mesh Wi-Fi system, 3-pack, dual-band, Gigabit ports
An option for covering several rooms if you want to compare a three-unit mesh system with router or access point mode.
Product specifications: AC1200, dual-band, Gigabit ports.
View at Joybuy
No image available
TP-Link Deco S4, AC1200 mesh Wi-Fi system, 3-pack, dual-band, Gigabit ports
An option if you want to cover several rooms and compare a 3-pack with Gigabit ports.
Product specifications: AC1200, dual-band, Gigabit ports.
View at Joybuy
No image available
MERCUSYS Halo H1200G, AC1200 mesh Wi-Fi system, 3-pack, dual-band
An option if you want to compare a three-unit mesh system for covering several rooms.
Product specifications: AC1200, dual-band.
View at Joybuy
Frequently asked questions
How can I check whether mesh will solve my workshop problem before I buy?
First, compare your internet connection over Ethernet with the connection at the actual workshop locations. The broadband measurement service commissioned by the Bundesnetzagentur also allows you to take Wi-Fi measurements; consider these separately from the Ethernet connection.
How can I use a Deco system behind an existing router?
TP-Link describes an access point mode that you can activate in the Deco app after the initial setup. In this mode, the upstream router handles certain tasks, and some Deco router features aren’t available. TP-Link also says that Ethernet backhaul works in access point mode.
How much bandwidth does a workshop with several video calls need?
It depends on the platform, resolution and number of devices in use at the same time. For a 720p group video call, Zoom recommends 2.6 Mbit/s upload and 1.8 Mbit/s download per meeting endpoint. This figure from Zoom isn’t a general requirement for other platforms, nor is it a guaranteed mesh performance level.
What legal requirements should I check for a Wi-Fi mesh system in Germany?
According to the Bundesnetzagentur, products covered by the relevant EU harmonisation legislation and placed on the EU market must carry the CE marking. For 6 GHz Wi-Fi in the 5945–6425 MHz range, the Bundesnetzagentur’s general assignment 76/2025 applies; it supersedes the earlier ruling 12/2025. Check the product documentation to confirm that a specific device version meets the applicable requirements.