Solo speakers in an echoey room
If you read the news from a fixed spot and can keep the microphone consistently close, room sound and speaking position are important factors.
For recording news in an untreated, echoey room, a dynamic microphone with a directional pickup pattern is a sensible starting point if you can speak close to it and keep your position steady. It won’t eliminate the room echo. USB makes it easier to connect to a compatible computer, while an XLR-only microphone needs an interface and an XLR cable. The best way to decide is to make a test recording from the spot where you plan to read, as the distance from the microphone and its position affect how much room sound it picks up.
If you read the news from a fixed spot and can keep the microphone consistently close, room sound and speaking position are important factors.
If you want to get started without a separate interface and monitor your voice directly during longer pieces, check the USB connection and headphone features of the specific model.
If you already have an audio interface or are planning to get one, you can choose your microphone and recording equipment separately. With XLR, you’ll need to factor in a cable and a suitable input.
A good fit if: You record solo on a computer and can maintain a consistent, close position.
Consider: A close position may be visible on camera. With hybrid models, check the features available with each connection individually.
A good fit if: You already have a suitable interface or want to expand your recording setup separately.
Consider: You’ll also need an interface and an XLR cable to record on a computer.
A good fit if: You need more distance while reading and a test recording from your position confirms the sound works for you.
Consider: Speaking from further away doesn’t automatically mean you’ll hear less echo.
| What matters | What to look for | Who should consider it? |
|---|---|---|
| Clarity in an echoey room | Speaking direction, a stable mount and a test recording from the planned reading position. | When I record the news in an untreated room, I want to hear how much room sound is picked up from my regular speaking position. Around 36% of consumers put clarity first, even when there’s room echo. |
| Direct connection to a computer | Check USB compatibility, the headphone connection and what’s included with the specific version. | If I want to get started without a separate interface, a direct USB connection matters for my solo speech recordings. Around 29% of consumers prioritise a straightforward computer connection. |
| Monitoring while speaking | Check for a headphone output, gain control and a pop shield suited to your planned speaking position. | When recording longer news pieces, I want to monitor my voice and keep a closer eye on changes to the levels. Around 21% of consumers prioritise monitoring while recording. |
| A setup you can expand | Check the inputs on your existing interface, whether you’ll need an XLR cable and which features work in each connection mode. | If I want to choose my microphone and recording equipment separately, an XLR recording setup could be right for me. Around 14% of consumers prioritise a recording setup they can upgrade later. |
Manufacturer claims about DSP features don’t prove that a recording will sound echo-free in your own space. Your speaking position and reflective surfaces still matter when choosing a microphone.
Before you buy, record a passage in your actual room, including pauses and clearly spoken consonants. Listen back from the position where you plan to record.
The RØDE PodMic is an XLR-only model, while the PodMic USB also offers USB-C. The connections and features therefore vary between versions.
Check the full model name, connections and what’s included.
To record on a computer with the XLR-only PodMic, you’ll also need an audio interface and an XLR cable.
RØDE states that the PodMic USB cannot output audio over USB and XLR at the same time.
If you need simultaneous signal paths, check that this feature is available on the exact model rather than simply counting its sockets.
The ATR2100x-USB combines a dynamic cardioid capsule with USB and XLR connections, and is designed for solo speech recordings. Audio-Technica also lists a headphone connection, USB and XLR cables, and a desktop tripod as included accessories.
The PodMic USB offers USB-C and XLR, while the similarly named PodMic is a separate XLR-only model. RØDE recommends a speaking distance of around 5–10 cm for the PodMic USB.
The MV7+ is a USB-C/XLR microphone for speech, with a headphone connection and DSP features described by the manufacturer. The SM7B is designed for a separate XLR recording setup.
The Profile USB is a condenser alternative with USB-C and a cardioid pickup pattern. Sennheiser lists gain, mix and headphone controls, as well as a desktop stand.
The RE20 dynamic broadcast microphone is designed for speakers with a suitable analogue recording setup.
This selection includes dynamic USB/XLR microphones and USB condenser microphones for recording speech on a computer. In an echoey room, use a test recording to check that you’ve found the right speaking position.
No image available
For recording speech on a computer or through an interface; the product description recommends a speaking distance of 2–6 inches.
USB and XLR connections, plus a headphone connection. According to the description, mute and microphone function buttons work only with a USB connection.
An XLR cable isn’t included.
No image available
For recording speech via USB on a computer or via XLR through an interface; the product description recommends a distance of 2–6 inches.
A headphone connection, gain control and mute function are listed. According to the description, RGB lighting and function buttons are active only with a USB connection.
An XLR cable and microphone arm aren’t included.
No image available
For recording speech on a computer or through an audio interface; the product description lists a cardioid pickup pattern.
USB-C and XLR outputs, as well as a 3.5 mm headphone connection, are listed. A desktop stand is described as part of the set.
No image available
For USB speech recording with a directional pickup pattern; the product description specifies a cardioid condenser microphone.
Gain control, mute and headphone monitoring are listed. The described package includes a boom arm and positioning accessories.
No image available
For USB recording of a single voice; the product description lists a selectable cardioid pattern among four directional pickup patterns.
Direct monitoring and a flexible mounting option are listed.
Point the speaking side towards your mouth and try to keep the distance consistent during your test recording. For the PodMic USB, RØDE recommends around 5–10 cm; this advice applies to that model. Check the sound from the spot where you’ll actually be reading.
You don’t necessarily need a separate interface to use the USB output of a compatible USB microphone. For the XLR-only PodMic, however, RØDE specifies an XLR cable and an audio interface to connect it to a computer.
No. RØDE states that the PodMic USB cannot output audio over USB and XLR at the same time.
No, it depends on the frequency band and operating conditions. The Federal Network Agency says that use without registration or fees is permitted only when the conditions of the relevant general assignment are met. For a specific radio microphone, check its frequency band and technical specifications. This frequency issue doesn’t apply to wired USB and XLR models.