Photographers capturing components and solder joints
If you need to make out small labels or solder joints, check the magnification of the specific lens rather than relying solely on the camera’s resolution or the word “macro”.
Choose your camera and lens based on the size of the circuit board, the camera height available and the level of detail you want to capture. For small components, the lens’s magnification is what matters, not just the camera body. Short macro lenses can be handy in tight spaces, but at their closest focusing distance they may leave little room for lighting. Lighting and a stable setup are also important when photographing shiny contacts and components at different heights.
If you need to make out small labels or solder joints, check the magnification of the specific lens rather than relying solely on the camera’s resolution or the word “macro”.
To capture the whole circuit board, the framing, camera height, support and available space all need to work together. Remember to allow room for your lights, too.
Reflections can obscure important details on shiny contacts. Edmund Optics describes diffuse lighting as one way to illuminate reflective objects more evenly. You’ll also need to consider depth of field when photographing components at different heights.
First compare the magnification and field of view you need, then check the space available for the camera, support and lighting. If your components are at different heights, also consider how you’ll capture the different focus planes and combine them if necessary.
| Requirement | What to check before buying | Who should pay particular attention? |
|---|---|---|
| Capture small components clearly | Check the lens mount and the maximum magnification of the specific lens. | If I want to make out tiny labels or solder joints, the lens’s magnification is what matters to me. Around 33% of consumers would say that capturing small details is their top priority. |
| Capture the whole circuit board in a tight space | Consider the size of the circuit board, camera height and distance between the lens and subject together. | If I want the whole circuit board in the frame, I need to check how the setup will actually fit on my desk. Around 27% of consumers would prioritise a full overview in a confined space. |
| Control reflections | Check whether there’s room for lights or diffusion around the circuit board, and whether the contact surfaces are visible in a test shot. | When photographing shiny contacts, I want to be able to control distracting reflections. Around 20% of consumers would prioritise images with minimal reflections. |
| Keep components at different heights in focus | Allow for focus bracketing, a stable camera position and any post-processing required. | If components sit at different heights, I need a way to capture several focus planes. Around 20% of consumers would prioritise sharpness across components at different heights. |
Magnification affects how large a subject appears on the sensor. Canon specifies 1:2 for the RF 35mm F1.8 IS Macro STM; Fujifilm and Sony both specify 1:1 for their respective 30mm macro lenses.
Decide how small an area you need to photograph, then compare the specifications for the exact lens model.
You may need a different lens later to capture smaller areas.
For a full-board view, the size of the circuit board and the achievable field of view matter. For close-ups, you’ll need to leave room in front of the lens for lighting. A copy stand also takes up space.
Measure the circuit board, the free desk space and the camera height, then check the lens, support and lights as one complete setup. NOVOFLEX lists a base measuring approximately 40 × 40 cm for the MS-MACRO-REPRO.
Depending on where you position everything, you may need a different support or lighting arrangement.
Poorly positioned lighting can create glare on reflective circuit boards or hide details. Changing the camera body alone won’t change the lighting.
First, test the lighting angle and diffusion on the contacts that need to be visible in the final image. Edmund Optics describes diffuse lighting as one possible solution for reflective objects.
Focus bracketing combines several shots taken at different focus planes. According to Canon Academy, the individual images need to line up precisely, so the method requires a stationary subject and a stable camera position.
Check whether the specific camera model simply captures the focus-bracketed shots or combines them automatically as well. Keep the camera and circuit board still while taking the shots.
Taking and combining the images requires extra time.
The X-S20 can be paired with the XF30mmF2.8 R LM WR Macro, sold separately, if you’re looking for an X System body to use with a 1:1 macro lens.
The α6700 is an E-mount APS-C body. Separately available macro options include the SEL30M35 and the longer SEL90M28G.
The Z50II can be considered for macro photography with the separately available NIKKOR Z MC 50mm f/2.8.
Canon lists both the RF 35mm F1.8 IS Macro STM and the RF 100mm F2.8 L Macro IS USM as compatible lenses for the EOS R50. Both are sold separately.
A selection of Joybuy mirrorless APS-C cameras with standard zoom lenses, as a starting point for circuit board overviews.
No image available
As a mirrorless APS-C camera with a tilting screen, it may be worth considering for checking your circuit board shots. For small solder joints, check the magnification you’ll need from the supplied lens.
Features listed in the product name: 16–50 mm Power Zoom and tilting screen.
You can’t tell from the camera name alone. Check the maximum magnification of the lens actually included and compare it with the area you need to capture. For example, the manufacturers specify 1:1 magnification for both the FUJINON XF30mmF2.8 and the Sony SEL30M35.
Set up the camera securely and check the framing with the actual circuit board. Diffuse light can illuminate reflective areas more evenly. If components sit at different heights, you can capture several focus planes and combine them afterwards, provided your setup remains still.
Focus bracketing can cover several focus planes, but it requires multiple precisely aligned shots and a stationary camera and circuit board. Check whether the specific model simply captures the bracketed shots or also combines them in-camera.
As well as the camera body, you may need to budget for a suitable macro lens, a support and additional lighting. The Verbraucherzentrale explains that many online purchases of goods in Germany generally come with a 14-day right of withdrawal. The conditions, start of the period and exceptions depend on the specific contract and goods.