Which solution is right for you?

Capturing paintwork details

If you want to show brushstrokes and small areas of a surface, the lens’s magnification and working distance are important. Sony Germany distinguishes between the minimum focusing distance and the distance from the subject to the front of the lens.

Keeping the whole figure in focus

For stationary figures with depth, you’ll need to decide whether a single shot is enough or whether you want to combine several focus planes. Canon Germany describes focus bracketing and subsequent focus stacking as separate steps.

Comparing paint colours

If you’re documenting several miniatures, consistent lighting and white balance are important. Canon Germany explains that white balance can compensate for colour casts under different lighting conditions.

What to look for when choosing

What you need What to check before buying Who it matters most to
Capture tiny details at a larger size Check the lens’s magnification, mount and working distance. Sony Germany distinguishes working distance from minimum focusing distance. If you want tiny painted details to appear as large as possible in the image, choosing the right macro lens is a priority. Around 28% of consumers have this focus.
Achieve greater depth of field Check focus bracketing and in-camera stacking separately; lens compatibility also matters for stacking. If you want a stationary figure to be sharp from front to back, pay particular attention to the shooting and editing process. Around 22% of consumers prioritise depth of field.
Compare paint colours Check whether the specific model offers adjustable white balance and RAW shooting; keep the lighting position and settings consistent throughout the series. If you want to document the colours of several miniatures consistently, it’s important to keep your shooting conditions the same. Around 22% of consumers have this as their main concern.
Work with artificial lighting Take test shots with your own light source and check that there’s room to position lamps alongside the lens. Canon Academy warns that some artificial light sources can cause banding or colour shifts. If you’re shooting under your existing table lighting, you’ll want to position the lamps effectively and spot any unwanted artefacts. Around 17% of consumers consider lighting their main concern.
Choose the right kit Check the product variant, included lens, mount and charging accessories for the combination you need. If you want to get started with a kit and avoid parts you don’t need, it’s essential to check exactly what’s included. Around 11% of consumers prioritise the included equipment.

Common selection mistakes

  • Comparing camera bodies alone

    A kit zoom may suit full-figure shots, but it won’t necessarily replace a macro lens for capturing very small details. According to Nikon, a checked Z50II kit doesn’t include a charger.

    First decide whether overview shots or close-ups are more important to you. Then compare the specific lens and everything included in the box.

  • Assuming focus stacking works with every lens combination

    A stacking mode may only work with certain compatible lenses. Focus bracketing and the finished image combined in-camera are also separate steps.

    Check the camera, lens and workflow you want to use together. OM SYSTEM lists compatible lenses for the OM-5 Mark II by model.

  • Assuming the minimum focusing distance is the space needed in front of the lens

    The minimum focusing distance isn’t measured from the front of the lens. Sony gives a working distance of around 2 cm for the E 30mm F3.5 Macro at its minimum focusing distance.

    Position your camera and lamps according to the working distance of the specific lens, so you can still light the miniature effectively.

  • Blaming the camera alone for colour variations

    White balance and the light source both affect colour reproduction. Canon Academy notes that some artificial light sources can cause banding or colour shifts.

    Test your existing lighting and keep your white balance consistent before replacing the camera body because of colour casts.

Key brands at a glance

Canon

The EOS R50 is an APS-C camera with an RF/RF-S mount. Canon describes focus bracketing and in-camera depth composition for this model.

  • The EOS R50 kit is listed with the RF-S 18–45mm zoom; Canon lists the RF 100mm F2.8L MACRO IS USM as compatible with the EOS R50.
  • The kit zoom isn’t listed as a 1:1 macro lens. The macro lens mentioned above is sold separately.

OM SYSTEM

OM SYSTEM lists in-camera focus stacking for the OM-5 Mark II and confirms that the M.Zuiko Digital ED 60mm F2.8 Macro is compatible with this mode.

  • OM SYSTEM specifies 1:1 magnification for the 60mm macro lens.
  • Check the lens as part of the specific combination you’re considering; its minimum focusing distance of 0.19 m isn’t the same as the clear space between the front of the lens and the subject.

Panasonic

According to Panasonic, the Lumix DC-G97 is a Micro Four Thirds camera body with Post Focus and Focus Stacking.

  • Panasonic specifies 1:1 magnification for the H-HS030 macro lens.
  • Panasonic marks the H-HS030 and H-HS030E as unavailable on its German product page. Check for a specific compatible lens that’s currently available.

Sony

The Sony α6700 is an APS-C camera with an E-mount. Sony specifies the E 30mm F3.5 Macro for this mount.

  • Sony gives the lens a magnification of 1:1.
  • At the minimum focusing distance, the working distance is around 2 cm, according to Sony. Check whether the camera and lighting will cast a shadow over the miniature.

Nikon

The Z50II kit is listed with a 16–50mm zoom; the Z MC 50mm f/2.8 is a separate macro lens for the Z mount.

  • Nikon specifies 1:1 magnification for the Z MC 50mm f/2.8.
  • The checked kit doesn’t include the macro lens mentioned above or, according to Nikon, a charger. Don’t assume the Z50II offers an automatic in-camera stacking workflow.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Is the supplied zoom lens enough for painted miniatures?

A kit zoom can be a good starting point for framing a whole figure. Whether a small painted detail appears large enough depends on the lens’s magnification; if needed, check for a compatible macro lens.

How do I set up the camera under artificial lighting to capture paint colours consistently?

Keep the lighting position and white balance as consistent as possible throughout your shoot. If you want to fine-tune colours later, check whether the specific model supports RAW shooting and take test shots under your lamps, as some artificial light sources can cause banding or colour shifts.

Do I need any special accessories to keep a figure sharp from front to back?

Not necessarily: first check whether a single shot is enough for your figure. For a focus sequence, the camera model’s features are key; in-camera stacking may also require a compatible lens. Keeping the camera fixed makes it easier to combine the shots.