Which solution is right for you?

For a single device

If you want to power a single modem or router using DC, the voltage, current and connector must all be compatible with your device. Eaton lists these specifications for each 3S Mini model; the model name alone doesn’t confirm compatibility.

For several devices

If your setup needs several devices with their own power supplies, check how many outlets are battery-backed and account for the combined load. Eaton and CyberPower clearly state which Schuko outlets on their respective models provide battery power.

For a quieter, space-saving setup

If the UPS will be close to shared workspaces, its size and alarm behaviour may influence your choice. Information about noise or alarm functions applies only to the specific model in question.

What should you look for?

For a shared internet connection, your UPS should suit the complete chain of devices. The table matches each user’s main concern with the relevant checks.

Concern What to look for when buying Who is it most relevant to?
Compatible connections Check your device’s rating plate and power supply against the UPS’s voltage, current and connector. If I only need to power one device and want to avoid an incompatible connection, I’ll start by checking its exact power requirements. Around 33% of consumers prioritise connection compatibility.
The complete chain of devices List your modem, router and, if needed, ONT, then match their power supplies to battery-backed outlets. If several devices are needed for the same internet connection, they all need to be powered together. Around 27% of consumers prioritise powering several devices.
Backup runtime Take the power consumption of all the devices you need into account and compare runtimes at a similar load. If I want to ride out short power cuts, runtime with my actual combination of devices is what matters. Around 27% of consumers prioritise the backup time they need.
Noise and placement Check the dimensions, noise information and alarm functions for the exact model variant, as well as finding a suitable place for it. If the UPS is near shared workspaces, I’ll also consider where to place it and whether its alarm might be disruptive. Around 13% of consumers prioritise quiet operation and a compact size.

Common mistakes when buying a UPS

  • Backing up only the router

    If your connection also relies on a separate modem or fibre-optic terminal, powering the router alone won’t be enough.

    Before choosing a UPS, list all the devices you need on site and their power supplies.

  • Assuming the rated power guarantees a particular runtime

    VA or W ratings don’t tell you exactly how long a UPS will power your specific combination of devices. For example, CyberPower quotes 18 minutes at 90 W for the BU650EU. That figure applies to this load and isn’t a runtime estimate for every studio.

    Compare runtime figures for a similar combined load, then check how long you need the backup to last under your actual conditions.

  • Confusing surge protection with battery backup

    According to Eaton, only three of the six Schuko outlets on the Eaton 3S550D provide battery power; the other three offer surge protection only.

    Plug each power supply needed for your internet connection into an outlet specifically marked as battery-backed.

  • Assuming similarly named connection variants are the same

    According to BlueWalker, the PowerWalker VI 650 SHL has Type F outlets, while the separate VI 650 SHL IEC model has IEC-C13 outlets. Eaton describes the 3SM36’s input as a French version.

    Check the full model designation and the input and output connections for the specific product listing.

    If you choose an incompatible variant, you may need a different connection cable or a different version of the UPS.

Notable brands and product ranges

Eaton

The 3S Mini 3SM36 is designed for a compatible device with a DC input, while the 3S Gen2 3S550D provides battery-backed Schuko outlets for power supplies.

  • Eaton lists selectable output voltages of 9, 12, 15 and 19 V for the 3SM36. Three of the 3S550D’s Schuko outlets are battery-backed.
  • According to Eaton, the 3SM36 has a French input; three more Schuko outlets on the 3S550D provide surge protection only.

CyberPower

The BU650EU is an AC UPS for several power supplies with Schuko plugs.

  • CyberPower lists three battery-backed Schuko outlets and a configurable alarm for the BU650EU.
  • The manufacturer’s runtime figure of 18 minutes is based on a 90 W load and can’t be applied directly to a different combination of devices.

APC by Schneider Electric

The Easy UPS BV650I-GR is a 230 V variant with a Schuko outlet and automatic voltage regulation.

  • Schneider Electric lists a 650 VA rating, a Schuko outlet and AVR for this model.
  • The rated power alone doesn’t tell you how long the UPS will power your particular combination of devices. For that, you’ll need a runtime figure at a comparable load.

PowerWalker / BlueWalker

The VI 650 SHL is a Schuko variant with an LCD display. It’s suitable for connecting existing power supplies, provided the load and connections are compatible.

  • BlueWalker lists two Type F outlets, 650 VA/360 W and a transfer time of 4–8 ms for the VI 650 SHL.
  • According to BlueWalker, the separate VI 650 SHL IEC has IEC-C13 outlets. Check the full model designation carefully.

Suitable products at Joybuy

Suitable products coming soon.

Frequently asked questions

Can I connect the UPS to the modem only?

Yes, if the modem is the only device needed for your connection on site. If you also need a router or an ONT, their power supplies must be connected to suitable battery-backed outlets too.

How do I check a DC mini UPS before connecting it?

Compare your device’s voltage, current requirements and connector with the specifications for the UPS model in question. The fact that the Eaton 3SM36 offers several selectable voltages doesn’t, on its own, confirm compatibility with your modem.

Will every outlet on the UPS work during a power cut?

No, this depends on the model and the individual outlet. According to Eaton, three of the Schuko outlets on the Eaton 3S550D are battery-backed; the other three offer surge protection only. Connect the power supplies needed for your internet connection to the battery-backed outlets.

What should I consider about the battery?

Check whether the battery in the specific model is replaceable and what replacement options the manufacturer recommends. Eaton states that the 3S550D has a user-replaceable lead-acid battery; this doesn’t tell you a specific replacement cost or when it should be changed.

What are the labelling and disposal requirements in Germany?

When monitoring the market for affected products, the German Federal Network Agency (Bundesnetzagentur) checks factors including CE marking, product identification, manufacturer details and German-language instructions. The German Environment Agency (Umweltbundesamt) points consumers to local collection points for waste electrical equipment. This information doesn’t automatically confirm that an individual product listing complies with the requirements.