Who is a monitor controller suitable for?

Bass editor with one pair of monitors

If you want direct access to the level, mono and mute controls at a small workspace, and don’t need any other monitoring paths, a basic controller may be enough. Features vary by model.

Editor with several monitoring paths

If you actually switch between sources, pairs of speakers or headphones, check that the model lets you control each of these paths separately. Mackie, ESI and Palmer’s product information describes different connection and switching options.

Editor with 2.1 monitoring

If you use a subwoofer and want to take it out of the signal path separately for comparisons, look for an explicitly stated subwoofer bypass. Room acoustics and speaker placement are unaffected by this; Genelec also highlights this point.

What should you look for when choosing one?

Buying priority What to check Who it matters most to
Controls and desk space Allow room for the unit and its cables. Palmer lists the MONICON M G2 as measuring 160 × 106 mm (width × depth). If I often adjust the level at a small desk, I want the control to be within easy reach without taking up unnecessary workspace. Around 31% of consumers prioritise direct control and the space required.
Mono monitoring Check whether the specific model has a mono switch; it is no substitute for assessing your room and speaker placement. If I want to check bass guitar tracks in mono quickly, direct access matters more to me than extra switching options. Around 25% of consumers put mono comparison first.
Sources and monitor pairs Count the stereo sources and pairs of speakers you need separately, then check that the connections match your monitoring setup. If I already use several sources or pairs of speakers, I want to be able to switch between them without constantly unplugging and reconnecting cables. Around 19% of consumers prioritise this switching capability.
Headphone path First check the headphone output on your interface. If you need one on the controller, check the connection and whether it has its own level control. If I want to connect headphones directly to the controller and adjust their level there, I need a dedicated headphone path. Around 13% of consumers prioritise a separate headphone path.
Subwoofer bypass A separately switchable subwoofer output matters if your setup is already configured as a 2.1 system. If I want to take an existing subwoofer out of the playback chain for comparisons, a dedicated bypass is essential. Around 12% of consumers prioritise this feature.

Which misconceptions should you avoid?

  • “2×2” doesn’t mean two headphone sockets

    On the Big Knob Passive, Mackie’s “2×2” refers to two sources and two monitor pairs. Mackie’s model comparison does not list a headphone output for this Passive version.

    Check whether the specific model has a headphone socket and its own level control.

  • A subwoofer bypass won’t fix bass problems in your room

    The bypass on the PreSonus MicroStation BT switches the subwoofer output. Room modes and speaker placement still affect playback; Genelec explains these influences in its placement guidance.

    Choose a bypass to compare playback with and without the subwoofer, and assess your speaker and listening positions separately.

  • The USB-C port on the MicroStation BT is not a USB audio connection

    PreSonus states that USB-C on this model is for power only and does not provide an audio connection to your computer.

    Plan for the analogue signal path and power supply separately. PreSonus does not list a USB power supply as included.

    You’ll need a suitable power supply to run it via USB-C.

Key brands to consider

Palmer

The MONICON M G2 is designed for one stereo monitoring path, while the MONICON L G2 adds features including a dedicated headphone path.

  • Palmer says the M G2 offers mono, dim and mute with one stereo input and output.
  • For the L G2, Palmer lists a headphone output with its own level control.
  • The L G2’s headphone amplifier needs power from the built-in power supply.

Mackie

The Big Knob Passive is designed for switching between sources and pairs of monitors.

  • Mackie lists two sources, two monitor pairs, plus mono, mute and dim.
  • Mackie’s model comparison does not list a headphone output for the Passive version. It is not the same as the USB-enabled Studio versions.

ESI

The MoCo is a passive option with two stereo input and output paths.

  • ESI lists source selection, separately switchable outputs, mono and mute; the model also offers an L/R swap.
  • ESI points out that the MoCo does not convert unbalanced signals to balanced ones. Make sure the signal type matches your monitoring setup.

PreSonus

The MicroStation BT is designed for an existing 2.1 monitoring setup, with a switchable subwoofer output and an additional headphone or aux output.

  • PreSonus lists a subwoofer bypass, analogue inputs and Bluetooth.
  • According to PreSonus, USB-C is for power only; a USB power supply is not included.

Behringer

The MONITOR1 is described as a passive stereo level controller for one pair of monitors.

  • Behringer lists mono and mute, as well as XLR/TRS and 3.5 mm connections.
  • If you need dim or several separately switchable monitor pairs, check that the specific model explicitly offers these features.

Suitable products on Joybuy

Related products coming soon.

Frequently asked questions

How can you tell whether a passive controller is compatible with your interface and active monitors?

Compare the outputs in use on your interface with the controller’s inputs, then compare its outputs with your speaker inputs. In particular, note ESI’s guidance that the MoCo does not output an unbalanced input signal as a balanced one.

Does a monitor controller make low bass more reliable to assess at a small desk?

Not through level control alone. Genelec points out that room acoustics and positioning affect what you hear, and that room modes can cause significant coloration. So check your speaker and listening positions too.

Do you need to install a USB audio driver for the PreSonus MicroStation BT?

No. You cannot connect the controller to your computer as a USB audio interface. PreSonus explains that the USB-C port is for power only; the required USB power supply is not included, according to PreSonus.

What are your rights if you buy a faulty controller from a business seller?

For consumer purchases in the EU, the official Your Europe portal states that you have a legal guarantee of at least two years from the date you receive the goods, which you can claim from the seller. An additional manufacturer’s warranty does not replace it. In general, online consumer purchases come with a 14-day right to withdraw from the contract, although exceptions may apply in individual cases.

Can you put a disused monitor controller in household waste in Germany?

No. The German Environment Agency explains that waste electrical and electronic equipment must be collected separately from household waste. You can, for example, take it to a recycling centre or return it to a retailer, subject to the applicable conditions.