Who is a monitor controller for?

Solo mixers with one pair of monitors

You mix at your desk and want to control the level, mono and mute directly, without setting up signal paths you won’t use. Mackie and Palmer list these features on certain monitor controller models.

Mixers who want a bass reference

You compare the low end of your dance track using your existing speakers or a subwoofer. Genelec points out that subwoofer placement affects how sound is reproduced in the room.

Headphone users working quietly

You sometimes work without speakers or want someone else to listen in. Check the headphone path on the exact model: ESI confirms that the MoCo has no built-in headphone amplifier, while Palmer lists a separately controlled headphone output on the MONICON L G2.

What should you look for when buying?

Consideration What to check before buying Who it matters most to
Level and direct controls Check which controls your interface already offers, and whether mono, dim and mute are available and easy to reach on the controller. If I mainly want to adjust the level quickly at my desk and use mono or mute directly, I don’t need signal paths I won’t use. Around 31% of consumers in this scenario prioritise direct level control.
Bass comparison and subwoofer routing Check how the subwoofer path is assigned and switched; assess bass problems at your listening position and in relation to speaker placement, too. When mixing a dance track, I want to compare the low end using my existing subwoofer or another pair of monitors, without confusing room problems with routing. Around 25% of consumers in this scenario put bass comparison first.
Headphone monitoring Check whether there’s a headphone amplifier, and whether the level control and, where applicable, main/cue selection suit your workflow. If I want to work quietly or listen along with someone else, I need a headphone path I can actually use, with suitable level control. Around 25% of consumers in this scenario prioritise headphone monitoring.
Multiple sources and monitoring options Map out the stereo sources and speaker pairs you need; check whether unbalanced signals are actually converted to balanced signals. If I want to switch between multiple sources or speaker pairs, the connections and switching need to suit my setup. Around 19% of consumers in this scenario prioritise having additional signal paths.

Common misconceptions

  • “Passive” means you can connect headphones

    That isn’t necessarily the case: ESI confirms that the passive MoCo has no built-in headphone amplifier, so you can’t connect headphones directly to it.

    First check the headphone output on your audio interface, then check the features of the exact controller model.

  • An extra speaker output already gives you bass management

    A switchable subwoofer path won’t eliminate room resonances or problems with placement or level matching. Genelec treats subwoofer positioning as a separate factor.

    Check the exact routing and level matching separately from your choice of controller.

  • Every model in a range has the same connections

    Palmer lists a stereo input and output on the MONICON M G2, while the MONICON L G2 has two stereo outputs, a mono output and a headphone path.

    Compare the full model names and plan the connections you need before buying.

Key brands to consider

Mackie

The Big Knob range includes controllers for different setups; the specifications for the Big Knob Passive apply to that model.

  • Mackie lists two sources, two pairs of monitors, and mono, dim and mute buttons for the Big Knob Passive.
  • The 2×2 specification doesn’t confirm that there’s a headphone output.

Palmer

The MONICON M G2 is designed for a single stereo monitoring path; the MONICON L G2 offers additional outputs and a dedicated headphone path.

  • Palmer lists mono, dim and mute, as well as XLR/TRS and 3.5 mm connections, on the M G2. The L G2 has two stereo outputs, a mono output and a separately controlled headphone output.
  • According to Palmer, the M G2 has only one stereo input and output; features of the L G2 don’t automatically apply to it.

ESI

The MoCo is a passive controller for two stereo sources and two stereo speaker paths.

  • ESI lists mono, mute and left/right swapping.
  • ESI notes that unbalanced input signals aren’t converted to balanced signals, and that the MoCo has no built-in headphone amplifier.

PreSonus

The Monitor Station V2 is designed for setups with multiple pairs of speakers, headphones and cue requirements.

  • PreSonus lists individual level controls and main/cue selection for the headphone outputs, and describes output C being used as a subwoofer output.
  • You may not need these extra features if you use just one pair of monitors.

Audient

The Nero is designed for more extensive monitoring setups, with multiple speaker, headphone and digital input paths.

  • Audient lists three stereo speaker outputs, an assignable subwoofer output and four headphone outputs on the Nero.
  • These features apply to the Nero and can’t be assumed to apply to other Audient devices.

Related products on Joybuy

Related products will be available soon.

Frequently asked questions

How can I tell if my audio interface is already enough?

Your interface may be enough if it provides easy access to the sources, speaker and headphone paths you need, as well as the direct controls you want. Note down your actual setup and check whether it covers level, mono and mute.

How do I connect a passive monitor controller?

Plan the signal path from your audio interface through the inputs on the specific controller to the appropriate speaker inputs. According to ESI, an unbalanced input signal isn’t converted to a balanced one by the ESI MoCo, so check the signal path and connectors separately.

Will a subwoofer output automatically improve my kick and bass mix?

No. A switchable output first gives you another way to compare what you hear. Subwoofer placement, room resonances, and level and phase matching are still separate tasks; Genelec explains how subwoofer positioning affects playback.

How should I care for the Mackie Big Knob Passive?

In the Big Knob Passive user manual, Mackie recommends keeping the device away from water and cleaning it only with a dry cloth. These instructions apply to this model.

What protections apply when buying from a business seller in the EU?

For covered consumer purchases from business sellers, EU law generally provides a minimum two-year legal guarantee from the date you receive the goods, as explained by Your Europe. A covered online distance-selling contract generally comes with a right to cancel; the specific conditions and exceptions depend on the contract and the applicable rules. A voluntary manufacturer’s warranty is separate.