Who might benefit from a monitor controller?

Drum editor with one pair of speakers

You want to adjust the level, mute the sound and check the mix in mono quickly, without adding extra signal paths to a crowded desk. iZotope recommends listening to your drum mix in mono before panning.

Editor who compares different monitoring setups

You switch between two pairs of speakers or sources while editing and need to plan for the right inputs and outputs. Mackie and ESI describe controllers with the relevant switching options.

Editor who needs a separate headphone feed

You need a separately controlled headphone feed as well as your speakers; if you’re working with others, several independent feeds may be useful. Palmer and PreSonus describe models with these headphone features.

What should you look for?

First, check whether your audio interface and monitoring software already offer the level control and mono monitoring you need. Then consider the signal paths you’ll actually use and whether you need a separate headphone feed.

What you need What to check before buying Who is this important to?
Checking your drum mix in mono Check whether the specific model switches the monitoring path directly to mono. iZotope recommends listening to your drum mix in mono before panning. If I want to check the mono mix regularly while editing, I need an easy-to-reach control. Around 36 % of consumers put mono monitoring first.
Level control on a small desk Measure the available space and allow room for plugs and cables. Palmer lists the MONICON M G2 as measuring 160 × 62 × 106 mm. If my desk is small, I want the level control and essential buttons within easy reach without taking up unnecessary space. Around 29 % of consumers prioritise size and ease of use.
Switching between sources and speakers Count the sources and pairs of speakers you actually use. Mackie lists the Big Knob Passive as supporting two sources and two monitor pairs; ESI lists two stereo inputs and outputs for the MoCo. If I regularly compare sources or pairs of speakers I already own, I need the right switchable signal paths. Around 21 % of consumers prioritise this flexibility.
Separate headphone feed Check whether your interface already has a suitable headphone output. Palmer lists the MONICON L G2 as having a headphone output with its own level control; PreSonus lists the Monitor Station V2 as having four headphone outputs, each with its own level control and Main/Cue selection. If I need to control my headphones independently of my speakers, the controller should have a dedicated feed. Around 14 % of consumers prioritise a separate headphone feed.

Common buying mistakes

  • Assuming a speaker line output is a headphone output

    A passive line controller doesn’t automatically replace a headphone amplifier. ESI explains that the MoCo has no built-in headphone amplifier.

    Check whether your audio interface has a suitable headphone output with the level control you need, or whether the specific controller model explicitly provides a headphone feed.

    If there’s no suitable headphone feed, you may need an additional headphone amplifier or a different controller.

  • Assuming the connectors automatically convert an unbalanced signal to balanced

    ESI says that an unbalanced input signal isn’t converted to a balanced signal by the MoCo.

    Compare your interface’s outputs, your speakers’ inputs and the signal routing across the whole connection chain.

    Depending on the equipment you already own, you may need different cables or a separate solution for the signal routing you require.

  • Buying based on the model range name alone

    Mackie distinguishes the Big Knob Passive from the Big Knob Studio and Studio+ models. Features found on the other versions aren’t automatically included on the Passive; Mackie doesn’t list a headphone output for that model.

    Check the full model name and the connections on the specific version against your setup.

Key brands at a glance

The models below differ mainly in the number of monitoring and headphone paths they offer. What matters is which of these you’ll actually use at your editing desk.

Palmer

The MONICON M G2 offers a compact passive stereo monitoring path; the MONICON L G2 adds more outputs and a dedicated headphone level control.

  • Palmer lists mono, dim and mute functions for the MONICON M G2, in a housing measuring 160 × 62 × 106 mm.
  • The M G2 provides one stereo monitoring path. The L G2’s separate headphone control is a feature of that different model and shouldn’t be assumed to be available on the M G2.

Mackie

The Big Knob Passive switches between two sources and two pairs of speakers.

  • Mackie lists mono, mute and dim, as well as switching between two sources and two monitor pairs, for the Passive version.
  • Mackie’s model comparison doesn’t list a headphone output for the Passive version; features from other Big Knob models aren’t automatically included.

ESI

The MoCo passively switches between two stereo input and output paths, including left-right swapping.

  • ESI lists mono and mute functions, along with several connection types, for the MoCo.
  • ESI says the MoCo has no built-in headphone amplifier and doesn’t convert unbalanced signals to balanced ones.

Behringer

The MONITOR1 is a passive level controller for one pair of speakers, with mono and mute functions.

  • Behringer lists combination XLR/TRS or 3.5-mm inputs, and XLR or 3.5-mm outputs.
  • Behringer says to use one connection type at a time, not both simultaneously.

PreSonus

The Monitor Station V2 is designed for setups with several pairs of speakers, headphone feeds and cue requirements.

  • PreSonus lists three stereo speaker pairs and four headphone outputs, each with its own level control and Main/Cue selection.
  • In a small editing space with just one pair of speakers, you may not use the extra signal paths; sound quality hasn’t been independently compared here.

Suitable products at Joybuy

Similar products coming soon.

Frequently asked questions

Where does the controller go in the signal chain?

For speaker monitoring, it goes between the line outputs of your audio interface or mixer and the inputs of your speakers. Check the stereo paths, connectors and balanced or unbalanced signal routing on the specific unit. ESI makes clear that the MoCo doesn’t turn an unbalanced input signal into a balanced one.

Can I plug headphones into a passive MoCo output?

No. ESI explains that the MoCo has no built-in headphone amplifier and that its outputs are designed for studio monitors. If appropriate, use the headphone output on your interface, or choose a model that explicitly includes a headphone feed.

How should I clean a Big Knob Passive?

In the Big Knob Passive manual, Mackie recommends cleaning it with a dry cloth. For other models, follow the relevant manufacturer’s instructions.