Which monitoring option is right for you?

Solo editor with one pair of speakers

If you edit your demo at a fixed listening position, easy-to-reach level, Mute or Mono controls can make your workflow smoother. First, check whether your audio interface already does the job; Bonedo also describes interfaces as a possible alternative for mixer functions.

Editor using two monitoring options

If you switch between pairs of speakers or playback sources for comparison, count the stereo inputs and outputs you need. ESI lists two stereo inputs and two stereo outputs for the MoCo; Mackie says the Big Knob Passive lets you switch between sources and pairs of monitors.

Songwriter who needs headphones or cue mixes

If you want to control headphones separately or listen along with others, check the headphone amp, level controls and signal routing. PreSonus lists four independently controlled headphone outputs with Main/Cue selection and Talkback for the Monitor Station V2.

What should you look for when buying?

Start by checking the features on your existing audio interface. Then decide which sources, pairs of speakers and headphone options you’ll actually use.

What you need What to check before buying Who should prioritise this?
Levels and quick monitoring checks Compare the level control and Mono, Mute and, where available, Dim functions on your interface and the specific controller. If you edit demos repeatedly and want to adjust the volume at your workstation or quickly check the signal in mono, these features are the priority. Around 40% of consumers put level control first.
Switching sources or speakers Count your sources and pairs of speakers separately; check the number and type of switchable stereo paths. If you actually use a second pair of speakers or another playback source, you’ll want to switch between them without unplugging anything. For around 30% of consumers, switching between monitoring options is the main concern.
Headphones and cue mixes Check the headphone amp, individual level controls, signal routing and power requirements. If you edit on headphones in a quiet workspace or want others to listen along, you need a headphone path suited to the job. Around 20% of consumers give headphone or cue features top priority.
Space and connections Check connector types and signal formats throughout the chain; allow for the space needed, including cables. If your desk is short on space or your interface and speakers have different connections, you’ll want a setup that fits without unnecessary signal paths. Around 10% of consumers focus mainly on desk space and connection compatibility.

Common buying mistakes

  • Assuming a line output is a proper headphone connection

    A speaker line output isn’t automatically a headphone amp. ESI explicitly states that the passive MoCo has no built-in headphone amp. With the Palmer MONICON M G2, don’t assume that the 3.5 mm socket is suitable for headphones.

    If you want to connect headphones, check that the exact model has a clearly specified headphone output and suitable level control.

    Depending on the signal path you choose, you may also need a suitable headphone amp or a different model.

  • Confusing USB-C power with USB audio

    According to PreSonus, the USB-C connection on the MicroStation BT is for power only and doesn’t carry audio from a computer.

    Check the specific model to see which connections support power, audio signals and headphones.

    If you want to play audio from a computer, you’ll still need a suitable audio output or audio interface.

  • Buying more routing options than you’ll actually use

    The models listed range from compact stereo controllers to units with multiple speaker and headphone paths. Extra paths may be unnecessary if you only use one monitoring option.

    Before buying, count your sources, pairs of speakers and the number of headphones you need to use at the same time.

    A larger unit may take up more space and require extra cables.

  • Assuming balanced outputs will balance the source signal

    ESI points out that the MoCo doesn’t convert unbalanced input signals into balanced signals.

    Check connector types and signal formats from the audio output right through to the speakers, rather than looking only at the controller’s output.

    If the signal paths aren’t compatible, you may need to plan a different cabling arrangement or setup.

Key brands at a glance

Palmer

The MONICON models cater for different monitoring needs. Palmer describes the M G2 as offering one stereo monitoring path, while the L G2 has a separate headphone output.

  • According to Palmer, the MONICON M G2 offers Mono, Dim and Mute without needing a power supply.
  • The headphone amp, Bluetooth and additional output on the MONICON L G2 require power. Don’t assume the M G2 has these features.

Mackie

According to Mackie, the Big Knob Passive is designed for switching between two sources and two pairs of monitors.

  • Mackie lists Mono, Mute and Dim for this model.
  • Check the specifications for the exact model to confirm the headphone path you need; features on other Big Knob models aren’t necessarily included.

ESI

ESI describes the MoCo as a passive controller with two stereo inputs and two stereo outputs.

  • ESI lists Mono, Mute and L/R swap.
  • ESI explicitly notes that the unit has no headphone amp and doesn’t balance unbalanced input signals.

PreSonus

The MicroStation BT and Monitor Station V2 suit different setups: a stereo/subwoofer system, or multiple speaker, headphone and cue paths.

  • PreSonus lists a Sub-Bypass on the MicroStation BT; for the Monitor Station V2, the manufacturer specifies four independently controlled headphone outputs and Talkback.
  • According to PreSonus, the USB-C connection on the MicroStation BT is for power only and isn’t a USB audio interface.

Audient

Audient lists multiple stereo speaker and headphone paths for the Nero.

  • Audient specifies three stereo speaker outputs and four headphone outputs.
  • These are model specifications and don’t demonstrate an advantage if you only use one pair of speakers.

Joybuy products

Related products coming soon.

Frequently asked questions

Can a passive monitor controller replace my audio interface?

No, not just by controlling levels and switching speakers. Check which recording and headphone features your interface provides; ESI explicitly describes the MoCo as a speaker controller without a built-in headphone amp.

How do I connect a controller for editing demos?

Match the line output from your source to the controller’s input, then connect its output to speakers or a suitable power amp. Check connector types and signal formats throughout the chain; ESI notes that the MoCo doesn’t balance unbalanced input signals.

Is the USB-C connection on the MicroStation BT an audio input?

No. PreSonus describes it as a power connection, not a way to send audio from a computer. The manufacturer lists analogue TRS inputs and Bluetooth among the audio options.

What are your rights in Germany if you buy a faulty product from a business seller?

According to the European Union’s consumer information, you’re generally entitled to a minimum two-year legal guarantee from the date you receive the goods. If there’s a fault, the seller is initially responsible for repair or replacement; an additional manufacturer’s warranty doesn’t replace these rights. The rights that apply in a particular case depend on the purchase and the fault.

What legal requirements apply to electronic or Bluetooth controllers sold in Germany?

The Bundesnetzagentur lists requirements that retailers must check before offering a product for sale. These include correct CE marking, product and manufacturer identification, and instructions in German for non-professional users. You can’t determine whether a specific listing is compliant from a general model description alone.