Who is a monitor controller useful for?

Mixers using one pair of monitors

If you mainly need easy control of your monitoring level and a mono check, a simple controller could be a good fit. Extra switching options are only useful if your existing interface doesn’t already provide them. Palmer lists Mono, Dim and Mute as features of the MONICON M G2.

Mixers using two monitor setups

If you want to compare your demo across two existing pairs of speakers or sources, check the number and type of switchable paths. Mackie lists two sources and two monitor pairs for the Big Knob Passive; ESI also describes the MoCo as having two stereo inputs and two stereo outputs.

Those monitoring quietly or together

For quiet mixing, you need a headphone output that’s actually available. If several people need to listen while recording, separate levels, cue selection and talkback may be useful. The features you need depend on how many independent paths your setup requires.

What should you look for when buying?

First, check what your interface already offers. If you need a separate controller, choose one based on the speaker, source and headphone paths you’ll actually use.

Buying criterion What to check Who should pay particular attention?
Level and mono Check that your interface is easy to reach and whether a separate device offers the Mono, Dim or Mute functions you want. If I want to adjust the level easily at my desk and check my jazz demo in mono, I look for straightforward controls. Around 33% of consumers rank level control and mono checking as their top buying requirement.
Switching between monitor setups Count the stereo sources and monitor pairs you actually use, and check which can be switched between separately. If you regularly switch between existing speaker pairs or sources, you need the right switching options, not just one stereo output. Around 27% of consumers make comparing their monitoring setups a priority.
Headphone monitoring Check whether your interface has a suitable headphone output or the controller specifically includes its own headphone amplifier. If I want to switch off my speakers and keep listening on headphones while mixing quietly, I check for a dedicated output. Around 20% of consumers prioritise a headphone path.
Connections and signal path Compare the connections and signal types on your interface, controller and monitors for each path you plan to use. If your interface and active monitors have different connections, it’s essential that the whole signal path is compatible. Around 13% of consumers consider connection compatibility their main reason for buying.
Cue and talkback Work out how many headphones will be needed at the same time, and whether they need separate levels or a different signal selection. If several people need their own headphone paths and communication while recording, check for separate cue paths and talkback. Around 7% of consumers prioritise these features for recording together.

Common misconceptions when buying

  • ‘Passive’ doesn’t automatically mean you can connect headphones

    ESI explains that the MoCo has no built-in headphone amplifier. Mackie’s model comparison also shows no headphone output for the Big Knob Passive.

    Check the full model name and make sure a headphone output is explicitly specified before planning to use the device for headphones.

  • A controller won’t turn an unbalanced signal into a balanced one

    ESI points out that the MoCo does not convert an unbalanced input signal into a balanced one.

    Check the source, inputs and outputs throughout the signal path, and compare the connections and signal types at each point.

  • More monitor paths aren’t always more useful

    The number of monitoring paths varies between models. Palmer specifies one stereo output for the MONICON M G2; Mackie lists two monitor pairs for the Big Knob Passive, and PreSonus lists up to three speaker pairs for the Monitor Station V2.

    Before choosing, count the monitor pairs and sources you’ll actually use rather than deciding based only on the maximum number of connections.

  • A controller won’t fix room or speaker placement issues

    Genelec explains that room acoustics and speaker placement affect what you hear. A different level control won’t automatically remove these effects.

    Consider speaker placement and listening position separately from the switching and level-control features your monitoring path needs.

Brands to consider

Palmer

Palmer’s MONICON M G2 offers one stereo monitoring path, while the MONICON L G2 is a version with additional paths.

  • According to Palmer, the M G2 offers Mono, Dim and Mute. For the L G2, the manufacturer lists a separately controlled stereo headphone output and a third output.
  • The M G2 is specified with one stereo output. The two versions aren’t interchangeable, so check the connections and paths you need before buying.

Mackie

The Big Knob Passive is designed to switch passively between two sources and two monitor pairs.

  • Mackie lists Mono, Mute and Dim for this version.
  • Mackie’s model comparison doesn’t list a headphone output for the Passive version. Details for other Big Knob versions don’t automatically apply to this model.

ESI

ESI describes the MoCo as a passive controller with two stereo input paths and two stereo output paths, using different types of connection.

  • According to ESI, the MoCo offers Mono, Mute and left-right swapping.
  • ESI points out that the MoCo doesn’t balance unbalanced signals. According to ESI support, the device has no built-in headphone amplifier.

PreSonus

According to PreSonus, the Monitor Station V2 is designed for multiple speaker pairs and separate headphone and cue paths.

  • PreSonus specifies three adjustable stereo speaker outputs, four individually adjustable headphone outputs with Main/Cue selection, and talkback.
  • If you only need one stereo monitoring path, you may not use the extra features. Check whether your setup needs several of these paths.

Audient

Audient lists the Nero as an option for multiple speaker pairs, as well as headphone and foldback paths.

  • According to Audient, the Nero supports up to three speaker pairs and includes a monitor headphone amplifier plus three additional foldback amplifiers.
  • The headphone amplifiers have different functions. Check which ones suit the monitoring paths you need.

Joybuy products

Related products will be available soon.

Frequently asked questions

How do I connect a monitor controller without mixing up the inputs and outputs?

Connect your interface’s line outputs to the controller’s inputs, then connect its outputs to the inputs on your active monitors. Check the connections and signal type for each path. ESI specifically points out that the MoCo doesn’t balance an unbalanced signal.

Can I connect my headphones to a passive ESI MoCo?

No. According to ESI support, the MoCo has no built-in headphone amplifier. If needed, use a suitable headphone output on your interface or choose another device that explicitly lists a headphone output.

Will a monitor controller on its own improve how I judge bass in a home studio?

A controller manages your monitoring path, but it won’t automatically correct the effects of the room or speaker placement. Genelec explains that both affect what you hear. So check your speaker placement and listening position too, before attributing changes in your bass decisions to a new level control.

What should I know about returns and faulty goods when buying online in Germany?

For a typical online purchase from a business seller, you generally have a 14-day right to cancel from the date of delivery. Exceptions and conditions on return postage may apply. If newly purchased goods are faulty, consumers can claim their statutory rights against the seller within two years of receiving them. This is separate from any voluntary guarantee.

What should I check for product compliance when buying a monitor controller with Bluetooth?

The presence of Bluetooth alone doesn’t show whether an individual device meets the relevant requirements. For radio equipment, the Federal Network Agency checks, among other things, CE marking, product identification, manufacturer details, instructions in German and the declaration of conformity.