Who might need a monitor controller?

Mixing with one pair of monitors

If you want to control the level, mute or mono functions directly from your desk, first check whether your interface already provides these controls conveniently. Bonedo notes that, in some home-recording setups, audio interfaces can take on the role of a controller.

Mixing with two monitoring setups

If you want to switch between two sources or pairs of speakers, you need the right signal paths, explicitly listed in the specifications. Mackie and ESI describe these switching options for the Big Knob Passive and the MoCo.

Mixing with a subwoofer or switching to headphones

If you want to switch off a subwoofer when comparing your mix, or use headphones directly from the controller, check each feature separately. Manufacturer information for PreSonus, Drawmer and ESI shows that they vary from model to model.

What should you look for?

What you need What to check before buying Who is it important to?
Level control and mix checks Compare the controls on the specific model with the features already available on your interface. If I want quick access to volume, mono, dim or mute controls at my desk, the key thing is how they work in my own monitoring setup. This is the main priority for around 36% of consumers.
Switching between sources and speakers Check the stereo inputs and outputs, switching options, connector types and signal routing. If I want to switch between sources or monitor pairs that are actually part of my setup while mixing, the signal paths need to support this. Around 29% of consumers say this is their main priority.
Switching the subwoofer Check that the subwoofer output and bypass or separate switching are compatible with your existing subwoofer’s connections. If my setup includes a subwoofer and I want to monitor my mix without it as well, I need a suitable switching option. This is the main priority for around 21% of consumers.
Headphones connected to the controller Check that the specific model has a headphone output and volume control for it. If I want to plug in headphones directly to the controller and adjust their level there, I shouldn’t assume that a speaker output does the same job. Around 14% of consumers prioritise having a dedicated headphone path.

Avoid common selection mistakes

  • Don’t mistake ‘2×2’ for two headphone outputs

    On a controller, ‘2×2’ may refer to sources and pairs of monitors. The Mackie Big Knob Passive does not list a headphone output, while ESI explicitly states that the MoCo cannot be used with headphones.

    Only count on a headphone connection and its own level control if both are listed in the specifications for the specific model.

    If the controller doesn’t have a headphone path, you’ll need to use another available signal path for your headphones.

  • Don’t count connector types as separate monitor paths

    The Palmer MONICON M G2 lists XLR and 3.5 mm connections, but has one stereo input and one stereo output. Having several connector types doesn’t automatically mean you can switch independently between two pairs of monitors.

    Check how many signal paths are listed, not just how many sockets there are.

  • Don’t assume USB-C is an audio connection

    PreSonus states that USB-C on the MicroStation BT is for power only and does not provide a USB audio connection to your computer.

    Keep power, audio connections and the headphone path separate in your connection plan.

    You’ll still need an existing audio interface, or one bought for the purpose, to connect audio to your computer.

Key brands at a glance

The features listed here apply to the specific models and manufacturer information mentioned, not to each brand’s entire range.

Palmer

Palmer describes the MONICON M G2 as a passive level controller for one stereo monitoring path at your desk.

  • Palmer lists mono, dim and mute functions, as well as balanced XLR/TRS and 3.5 mm connections.
  • The model has one stereo input and output; it is not specified as supporting independent switching between two pairs of monitors.

Mackie

Mackie says the Big Knob Passive is designed for switching between two sources and two pairs of monitors.

  • Mackie lists mono, mute and dim functions.
  • The Passive version has no headphone output listed; features found on other Big Knob models don’t automatically apply to this one.

ESI

ESI describes the MoCo as a passive controller with two stereo inputs and two stereo outputs, using different connector types.

  • ESI lists mono, mute and left/right swap functions.
  • According to ESI, the MoCo has no headphone amplifier and does not convert unbalanced signals to balanced ones.

PreSonus

PreSonus says the MicroStation BT is designed for one pair of active speakers with an optional subwoofer that can be switched off, as well as additional Bluetooth or analogue inputs.

  • PreSonus lists a sub bypass and a headphone/aux output.
  • According to PreSonus, USB-C is for power only and does not function as a USB audio interface.

Drawmer

Drawmer lists multiple sources, two pairs of monitors, a separately switchable subwoofer and a headphone path for the CMC2.

  • The manufacturer lists a dedicated headphone amplifier with level control, as well as mono, phase reverse, dim and mute functions.
  • These features are manufacturer claims for this model, not an independent comparison with passive devices.

Suitable products on Joybuy

Suitable products coming soon.

Frequently asked questions

Does a passive monitor controller replace my audio interface?

No. Level and speaker control don’t automatically replace an interface’s audio functions. Mackie distinguishes the Big Knob Passive, which has no USB audio I/O, from the Studio versions. PreSonus states that USB-C on the MicroStation BT is for power only.

How do I connect an interface, controller and active monitors?

First, match your interface’s line outputs to the controller’s inputs, then connect the controller’s outputs to your monitors’ inputs. ESI explicitly states that the MoCo does not convert unbalanced signals to balanced ones. Set the volume low before switching on, and follow the instructions for your chosen model.

What are my rights if an online purchase is faulty in Germany?

Your statutory rights against the seller are separate from any voluntary guarantee. For distance sales to consumers, you generally have a right to cancel; the statutory period is 14 days and, for a standard delivery of goods, usually starts when you receive them. Statutory exceptions and the terms of your specific contract should also be taken into account.

Does a monitor controller need a CE mark to be sold in Germany?

CE marking is required only for products covered by the relevant harmonised EU rules. For the electrical and electronic products it oversees, the Bundesnetzagentur checks matters including labelling, manufacturer details and the required conformity documents. This does not confirm that a particular model variant meets these requirements.

How do I care for a passive monitor controller?

Mackie recommends using a dry cloth to clean the Big Knob Passive and warns against using water. For other models, follow the relevant manufacturer’s instructions.