Who can benefit from a monitor controller?

Loop editor with one pair of speakers

If you assess loops at your desk using one pair of speakers, first check whether your interface already gives you easy access to level control and the mono monitoring you need. Bonedo notes that, in some home recording setups, audio interfaces take on functions normally handled by a mixing desk.

Headphone user working quietly

If you switch between speakers and headphones, you’ll need a suitable headphone path on your interface or controller. A dedicated, adjustable output on the controller is only necessary if your existing interface doesn’t already meet your needs.

Editor using multiple monitoring options

If you compare loops using additional sources or speaker pairs, count inputs and outputs separately. This helps you check whether a controller really offers the switching options you need.

What should you look for when buying?

First, check whether your interface already gives you easy access to level control and the monitoring paths you need. Then count your sources, speaker pairs and headphone paths separately before choosing any extra features.

What you need What to check before buying Who is it important to?
Level control and mono monitoring Compare the controls on your interface with those on the controller, and check whether one stereo speaker path is enough. At my desk, I want level control close at hand and the option to check loops in mono, without switching between unnecessary paths for a single pair of speakers. Around 33% of consumers put level and mono control first.
Headphone path Check whether there’s a headphone output and whether its level can be adjusted separately. When I’m working quietly, I need a suitable headphone path; an interface output that already meets my needs may make an additional one unnecessary. Around 27% of consumers prioritise a headphone path.
Switching between monitoring options Count stereo sources and speaker pairs separately; check whether the specific model provides the independent subwoofer routing you need. When comparing my loops, I want to switch between the sources and speaker pairs I actually use. Around 20% of consumers prioritise switching between monitoring options.
Connections and space Check the connectors and whether the signal paths are balanced or unbalanced; allow for the unit itself and space for cables. Before making room for a device on my desk, I want to be sure its connections and signal path will work with my interface and speakers. Around 20% of consumers pay particular attention to connection and space requirements.

Common buying misconceptions

  • “Passive” means you can connect headphones

    A passive speaker controller doesn’t automatically include a headphone amplifier. ESI explains that the MoCo has no built-in headphone amplifier; Mackie doesn’t list a headphone output for the Big Knob Passive.

    Check whether your interface already has a suitable headphone path or whether the specific controller model explicitly includes a headphone output.

  • Two monitor paths mean an independently switchable subwoofer output

    A second pair of speakers isn’t automatically the same as separate subwoofer routing. Models with this kind of routing specify it explicitly.

    If you want to connect a subwoofer, check how its output is assigned and switched on the specific model.

  • Compatible sockets guarantee a compatible signal path

    ESI points out that the MoCo doesn’t convert unbalanced input signals to balanced ones. The connectors alone therefore don’t tell you whether the signal type is compatible throughout the monitoring path.

    Before choosing cables, compare the inputs and outputs and check the signal type supported by your interface, controller and speakers.

Key brands at a glance

Palmer

The MONICON range caters for different input, output and headphone requirements.

  • According to Palmer, the MONICON M G2 has Mono, Dim and Mute switches, plus one stereo input and one stereo output.
  • The M G2 doesn’t have a second switchable stereo speaker path or a dedicated headphone amplifier. The MONICON L G2 is a different model, with a separately adjustable headphone output and additional outputs.

Mackie

The Big Knob Passive is designed for setups that need to switch between sources and pairs of speakers.

  • Mackie lists two sources, two monitor pairs, and Mono, Mute and Dim functions for the Big Knob Passive.
  • No headphone output is listed for the Passive version. Mackie’s claims about sound quality aren’t based on independent measurements.

ESI

According to ESI, the MoCo has a passive signal path with two stereo sources and two stereo outputs.

  • ESI lists separate output buttons, Mono and an L/R swap.
  • According to ESI, the MoCo has no built-in headphone amplifier and doesn’t convert unbalanced input signals to balanced ones.

PreSonus

The Monitor Station V2 offers multiple speaker and headphone paths for suitably equipped workstations.

  • PreSonus lists three stereo speaker outputs and four separately adjustable headphone outputs.
  • If you only use one pair of speakers, some of these additional paths may be unnecessary for your setup.

Audient

Nero is designed for setups with multiple speaker and headphone paths.

  • Audient lists three stereo speaker paths and four headphone outputs.
  • The manufacturer’s claims about especially clean sound or superior stereo balance haven’t been independently verified in comparative tests.

Suitable products at Joybuy

Suitable products coming soon.

Frequently asked questions

Do I really need a monitor controller as well as my audio interface?

Not necessarily. If your interface gives you easy access to level control and the monitoring paths you need, you don’t need an additional controller for these tasks. What matters is which features your specific interface and setup already offer.

Can I connect headphones to a passive speaker output?

Don’t assume you can. ESI explicitly states that the passive MoCo has no built-in headphone amplifier and that headphones can’t be connected to it. Instead, use a dedicated headphone output on your interface or a suitable controller.

What should I check when connecting and maintaining my equipment?

Compare the connections on your interface, controller and speakers before choosing cables; for example, according to ESI, the MoCo doesn’t convert an unbalanced signal to a balanced one. Follow the instructions for your specific model: Mackie recommends cleaning the Big Knob Passive with a dry cloth.

Who should I contact if a product develops a fault after purchase?

For a consumer purchase in the EU, the statutory guarantee applies against the seller and, according to Your Europe, lasts for at least two years from the date you receive the goods. This is separate from any additional manufacturer’s guarantee.

What are the rules in Germany on CE marking and disposal?

According to the European Union’s guidance, CE marking is only required when EU harmonisation legislation explicitly requires it for the product concerned; it isn’t a general quality mark. The German Environment Agency says that a controller classed as waste electrical equipment must not be disposed of with household waste, but taken to a separate collection point.