Who would benefit from a monitor controller?

Percussion editor with one pair of monitors

You want to catch sudden changes in volume quickly and occasionally check your mix in mono, while keeping your headphones connected to your audio interface. Palmer and Mackie list Mono, Dim and Mute functions for the models discussed here.

Editor with two monitoring options

You regularly switch between sources or pairs of speakers and need the right switching options. Mackie says the Big Knob Passive lets you select between two sources and two monitor pairs; ESI lists two stereo inputs and two stereo outputs for the MoCo.

Editor who switches between headphones or a subwoofer

You need a separately controlled headphone output on your controller, or want to switch an existing subwoofer on and off as required. Drawmer describes a dedicated headphone output on the CMC2, while PreSonus lists a sub bypass on the MicroStation BT.

What should you look for when buying?

What matters to you What to check before buying Who should pay particular attention?
Volume and monitoring control Check whether Mono, Dim and Mute are included, and whether the control is easy to reach on your desk. Palmer and Mackie list all three functions for the models discussed here. If I often switch between volume levels while editing, I want the monitoring controls close at hand. Around 36% of consumers prioritise volume and mono monitoring.
Desk space and connections Measure the available space, including room for cable plugs. Palmer gives the MONICON M G2’s footprint as 160 × 106 mm; also check that its inputs and outputs match your interface and speakers. If I have little space left on my desk, the controller and its connected cables need to fit. Around 29% of consumers prioritise footprint and connection compatibility.
Switching between sources and speakers Count your stereo sources and monitor pairs separately, then check the connections on the specific device. Mackie lists two selectable sources and two monitor pairs; ESI lists two stereo inputs and two stereo outputs. If I regularly switch between several sources or monitor pairs, I need the right switching options. Around 21% of consumers put switching between sources or speakers first.
Headphones and subwoofer Check whether you need a separately controlled headphone output or a switchable subwoofer output. Drawmer lists a controllable headphone output on the CMC2; PreSonus describes a sub bypass on the MicroStation BT. If I want to control my headphones directly from the controller or switch my existing subwoofer, routing is key. Around 14% of consumers prioritise a headphone or subwoofer output.

Buying and connection pitfalls

  • Assuming “2×2” means two headphone outputs

    On the Mackie Big Knob Passive, 2×2 refers to sources and monitor pairs. Mackie’s model comparison doesn’t list a headphone output for this version.

    Check the number of sources, speaker pairs and headphone connections separately before choosing a model.

    If you need a separate headphone output, you may also need a headphone amplifier or a different controller model.

  • Assuming a passive controller will balance every signal

    ESI points out that the MoCo doesn’t convert an unbalanced input signal into a balanced one.

    Check the signal path from your audio interface, through the controller and on to your speakers, and make sure the connections match.

    Depending on your existing connections, you may need different cables or another connection solution.

  • Assuming USB-C automatically carries audio

    According to PreSonus, the USB-C connection on the MicroStation BT is for power only and doesn’t provide a USB audio connection.

    Check the details for the exact model to distinguish between the power connection, audio inputs and headphone output.

    You may still need a separate audio interface for your audio connection.

Relevant brands at a glance

Palmer

The MONICON M G2 is designed for a compact stereo monitoring setup; the MONICON L G2 is a differently equipped option with a dedicated headphone output.

  • Palmer says the MONICON M G2 offers Mono, Dim and Mute, with a footprint of 160 × 106 mm.
  • The MONICON M G2 has one stereo output path. The L G2’s headphone function isn’t automatically available on the M G2. These are manufacturer specifications, not independent sound measurements.

Mackie

The Big Knob Passive is designed for switching between two sources and two pairs of monitors.

  • Mackie lists Mono, Mute and Dim for the Passive version.
  • Mackie’s model comparison doesn’t list a headphone output for the Big Knob Passive. Specifications for the Big Knob Studio don’t automatically apply to the Passive version.

ESI

ESI describes the MoCo as a passive controller with two stereo input paths and two stereo output paths.

  • ESI lists Mono, Mute and left-right swap.
  • According to ESI, the MoCo has no built-in headphone amplifier and doesn’t balance an unbalanced input signal.

Drawmer

The CMC2 combines several monitor paths with a separately controlled headphone output.

  • Drawmer lists two stereo monitor outputs, a mono subwoofer output, and Mono, Dim and Mute. Its stated footprint is 18 × 16 cm.
  • The extra paths and connections are only useful if they suit your workflow. Claims about sound transparency on the product page are the manufacturer’s own and aren’t supported here by a model comparison.

PreSonus

The MicroStation BT is described as suitable for a stereo or 2.1 setup, with a sub bypass and an additional Bluetooth source.

  • PreSonus lists a headphone/aux output and a sub bypass.
  • According to PreSonus, the USB-C connection is for power only, not USB audio. The product features described don’t include a dedicated Mono switch.

Matching products on Joybuy

Similar products coming soon.

Frequently asked questions

Will a Mono switch fix phase problems in my percussion tracks?

No. A Mono switch changes your monitoring to let you compare the mix in mono; you’ll need to check and edit the relationships between individual recorded tracks in your audio project. iZotope distinguishes between phase relationships and polarity reversal.

How do I connect a passive controller?

First, check that your audio interface’s outputs match the inputs on your active speakers and the connections on the specific controller. ESI lists balanced and unbalanced connections for the MoCo, but points out that the device doesn’t balance an unbalanced signal.

Can I use the USB-C connection on the PreSonus MicroStation BT as an audio interface?

No. PreSonus describes the USB-C connection as being for power only; the manufacturer lists separate analogue inputs for audio signals.

What return and faulty-goods rights apply when buying in Germany?

For an ordinary online purchase from a trader, you generally have 14 days from delivery to cancel; Your Europe notes that exceptions and return costs may apply. If goods are faulty, you have statutory rights against the seller, which, according to EU information, apply for at least two years from the date you receive the goods. This is separate from any voluntary guarantee.

What should I check for product safety when buying an active or Bluetooth-enabled device?

For products within its remit, the Bundesnetzagentur lists checks including product identification, manufacturer details, the CE marking, and any required German-language instructions and warnings. Check these details for the specific device and listing; a model name alone doesn’t confirm compliance.