Who is a monitor controller for?

Piano mixers with one pair of monitors

If you share a desk, having an easy-to-reach control for the features you need — such as level, mute and mono monitoring — can simplify your workflow. Palmer lists these features for the MONICON M G2; compare them with what your audio interface already offers.

Mixers with two pairs of monitors

If you want to compare piano recordings on two pairs of monitors you already own, look for straightforward switching and suitable connections. Mackie and ESI each describe their passive models as having two stereo monitor outputs.

People monitoring together on headphones

If several people need to monitor on headphones at the same time, dedicated headphone outputs and separate level controls matter more than extra line outputs. PreSonus and Audient describe models with multiple headphone outputs; ESI notes that the MoCo has no built-in headphone amplifier.

What should you look for when buying?

First, check whether your audio interface already provides the features you need. Then compare the number of monitor and headphone outputs, along with the connections throughout your signal chain.

Your existing audio interface

A good fit if: its level, mute, mono and headphone controls are easy to reach and suit your workflow.

Consider: Whether you can switch speakers or sources without unplugging depends on the interface. Bonedo notes that audio interfaces can take on some of a mixer’s functions in certain home recording studios.

Passive controller for one pair of monitors

A good fit if: you need a dedicated level control and features such as mono, dim or mute at a shared desk.

Consider: Palmer describes the MONICON M G2 as having one stereo output path. For separate headphone levels, you’ll need another suitable solution or your interface’s headphone output.

Passive switcher for two pairs of monitors

A good fit if: you want to compare piano mixes on two pairs of speakers you already own; Mackie and ESI each describe their models as having two stereo monitor outputs.

Consider: The line outputs on these passive models are not automatically headphone outputs.

Controller with dedicated headphone outputs

A good fit if: several people need their own headphone levels or different cue mixes.

Consider: Extra outputs are only useful if you need them; check the sources, connections and signal routing.

Criteria What to check when buying Who should pay particular attention
Level control and direct access How easy the control is to reach, and whether the specific device has mute, dim and mono functions. If I want to adjust the level quickly at a shared desk and check piano recordings in mono, direct access is essential; around 36% of consumers put this need first.
Two pairs of monitors The number of stereo outputs and the switching and connections needed for both existing pairs. If I want to compare the same mix on two pairs of speakers I already own, I need a suitable switcher; around 29% of consumers prioritise switching between monitor pairs.
Headphone outputs The number of headphone outputs, separate level controls and cue routing you need; compare this with your audio interface. If several of us need to monitor on headphones at the same time, we may need our own levels or signals; around 21% of consumers put separate headphone outputs first.
Connections and signal path The connection types on your interface, controller and speakers, as well as the signal routing you need; distinguish between line and headphone outputs. If my existing interface and speakers require particular connections, I check the whole signal chain; around 14% of consumers prioritise connection compatibility.

Common buying mistakes

  • Confusing line outputs with headphone outputs

    A passive monitor controller doesn’t automatically include a headphone amplifier. ESI states explicitly that the MoCo has no built-in headphone amplifier.

    Check whether the specific model has a dedicated headphone output with the level controls you need.

    Depending on your setup, you may also need a suitable headphone amplifier.

  • Assuming the connection type converts the signal

    ESI explains that the MoCo does not convert an unbalanced input signal into a balanced output signal.

    Check your source, controller and speakers as one complete signal chain, and confirm the signal type at each connection.

    Depending on the equipment you already own, you may need different cabling or a more suitable controller.

  • Buying more features than your workflow needs

    Extra speaker switching, mono, dim and mute functions or headphone outputs are only relevant if you actually use them when mixing piano.

    Before choosing a model, make a note of your audio interface’s features and how many monitoring outputs you regularly need.

    Another device and extra cabling can add clutter to your workspace without improving your workflow.

Key brands to consider

Palmer

The MONICON range caters for different needs when it comes to monitor and headphone outputs.

  • Palmer says the MONICON M G2 offers mono, dim and mute functions, plus one stereo output path.
  • According to Palmer, the MONICON L G2 has two stereo outputs, one mono output and a separately controlled headphone output.
  • Check the connections and outputs for each model; the L G2’s features do not automatically apply to the M G2.

Mackie

The Big Knob Passive is designed to switch between two sources and two pairs of monitors.

  • Mackie lists mono, mute and dim functions for this model.
  • Mackie’s model comparison does not list a headphone output for the Passive version. Don’t assume it has features found on other Big Knob models.

ESI

ESI describes the MoCo as a passive controller for two stereo sources and two stereo speaker outputs.

  • ESI describes a mono switch and a function for swapping the left and right signals.
  • According to ESI, the MoCo has no built-in headphone amplifier and does not convert an unbalanced input signal into a balanced one.

PreSonus

The Monitor Station V2 and MicroStation BT serve different purposes in a monitoring setup.

  • PreSonus describes the Monitor Station V2 as having four separately controlled headphone outputs and talkback.
  • According to PreSonus, the MicroStation BT has a headphone/aux output and a sub bypass.
  • Check which model suits the headphone and speaker outputs you need, rather than assuming features are shared between devices.

Audient

The Nero is designed for a setup with multiple speaker and headphone outputs.

  • Audient lists three stereo speaker outputs, an assignable subwoofer output and four flexibly routable headphone outputs.
  • These extra outputs are most relevant when they’re part of your actual workflow.

Suitable products at Joybuy

Similar products will be available soon.

Frequently asked questions

Do I need a monitor controller as well as an audio interface?

Not necessarily. If your interface already provides suitable level controls, the headphone outputs you need and, where relevant, mono or speaker switching, first compare these features with what an extra controller would add to your workflow.

How do I connect a passive controller for mixing?

Plan the analogue line signal path from your audio interface through the controller’s suitable inputs to the appropriate speaker outputs. Check the connections on the specific model: ESI states that the MoCo does not convert an unbalanced input signal into a balanced one.

Can I connect headphones to any output on a passive controller?

No. ESI explains that the MoCo has no headphone amplifier and that its stereo outputs are intended for studio monitors. Make sure you have a dedicated, suitable headphone output for your headphones.

Are a guarantee and your statutory rights the same thing?

No. In an article dated 28 September 2026, Verbraucherzentrale explains that your statutory rights apply when goods are faulty, while a guarantee is an additional voluntary commitment with its own terms. Check the terms of any guarantee separately.

What should I check to ensure a controller sold in Germany meets the relevant requirements?

For products within its remit, the Bundesnetzagentur checks matters including CE marking, product identification, manufacturer details and any required German-language instructions and warnings. CE marking is not an independent quality seal; you can’t tell whether an individual model meets the requirements that apply to it simply from its product category.