Who is a monitor controller for?

Loop editors using one pair of speakers

If you share a desk, an easy-to-reach control with mute and, if needed, mono can make it easier to manage your speakers. Palmer lists these features for the MONICON M G2.

Headphone users working quietly

If you switch between speakers and headphones, check whether the controller or your audio interface adjusts the headphone level. ESI points out that the passive MoCo has no built-in headphone amplifier.

Loop editors checking reference mixes

If you check loops in mono or through another pair of speakers, you’ll need the right switching options and connections. Mackie lists two sources and two monitor pairs for the Big Knob Passive.

What should you look for when buying?

First, check whether your existing audio interface already has the controls and monitoring routes you need. Then decide whether you need a dedicated headphone route, extra speakers or listening positions that can be used at the same time.

What you need What to check when buying Who should prioritise this?
Level and mute How easy the control is to reach, and whether the specific model has mute, dim and mono functions. If you want to adjust the speaker level directly or mute them quickly at a shared desk, these controls should be your top priority. Around 40% of consumers put level and mute first.
Using headphones A dedicated headphone output with level control, or a suitable output on your audio interface. If you want to work quietly on headphones and adjust their level at your workstation, you’ll need a dedicated, suitable headphone route. Around 30% of consumers prioritise headphone use.
Mono and monitor comparisons The right stereo outputs for your speaker pairs, plus a mono function if you need one. If you mainly want to check loops in mono or through another existing pair of speakers, you’ll need the right switching options. Around 20% of consumers put monitor comparisons first.
Several people listening at once The number of headphone outputs, level control for each, and the source selection available for each output. If several people need to listen at the same time and may need different signals, the number of independently controlled headphone routes is crucial. Around 10% of consumers prioritise shared listening.

Avoiding common buying mistakes

  • Assuming a passive line output is a headphone output

    A passive monitor controller doesn’t automatically include a headphone amplifier. ESI explicitly states that headphones cannot be connected to the MoCo.

    Check whether the specific model has a headphone output with an amplifier and level control, or use a suitable output on your audio interface.

    Depending on your set-up, you may need a separate headphone route and the necessary cables.

  • Confusing speaker outputs with headphone listening positions

    Several stereo speaker outputs don’t tell you how many headphones you can connect and control independently. Manufacturers list these as separate signal paths.

    Count speaker pairs and the number of people who need to use headphones at the same time separately, and check the controls available for each output.

  • Assuming a passive signal path means every function works without power

    On the Palmer MONICON L G2, the built-in power supply powers features including the headphone amplifier, Bluetooth and the third output.

    Check the power requirements of the features you want to use, and whether you have a suitable socket available at your workstation.

    The power supply takes up a socket at your shared workstation.

  • Expecting monitor switching to solve bass problems in the room

    A controller provides controls and monitoring routes, but it won’t automatically correct the effects of room acoustics or speaker placement. Genelec highlights how these factors affect what you hear from your listening position.

    Use mono and monitor comparisons as checking tools, and assess speaker placement and your listening position separately.

Brands to consider

Palmer

The MONICON range caters for different stereo and headphone routing needs.

  • Palmer lists Mono, Dim and Mute for the MONICON M G2; the model has one stereo output path.
  • On the MONICON L G2, the built-in power supply powers features including the headphone amplifier, Bluetooth and the third output.

Mackie

The Big Knob Passive is designed for two stereo sources and two pairs of speakers.

  • Mackie lists direct access to Mono, Mute and Dim.
  • The Passive version has no listed headphone output; features of other Big Knob models aren’t automatically available on this one.

ESI

ESI describes the MoCo as a passive controller with two stereo input and output paths.

  • According to ESI, its features include Mono, Mute and left/right swap.
  • The MoCo has no built-in headphone amplifier and doesn’t convert an unbalanced input signal to a balanced one.

PreSonus

The Monitor Station V2 is designed for set-ups with several pairs of speakers and multiple headphone listening positions.

  • PreSonus lists three controllable speaker pairs and four headphone outputs, each with its own level control and Main/Cue selection.
  • These extra signal paths are only useful if you’ll use them in your own set-up.

Audient

Audient describes the Nero as having several stereo monitoring paths and headphone outputs.

  • According to Audient, it has three stereo speaker outputs, an assignable subwoofer output and four headphone outputs.
  • Check that these extra routes suit your workspace, cabling and actual signal routing needs.

Suitable products on Joybuy

Suitable products coming soon.

Frequently asked questions

Can a passive monitor controller drive my headphones?

Not simply because it’s called a “monitor controller”. ESI explicitly states that headphones cannot be connected to the passive MoCo. If you want to use headphones with your controller, check whether the specific model has a dedicated headphone output with an amplifier and level control.

How do I connect the controller without mixing up connection types?

Compare the output and signal level of your audio interface with the controller’s inputs, then compare its outputs with your speakers. For the ESI MoCo, the manufacturer lists balanced TRS inputs and XLR outputs, among other connections; according to ESI, this doesn’t make an unbalanced input signal balanced.

Will a monitor controller automatically help me judge the bass in my loops?

No. A monitor controller can provide suitable monitoring routes and controls, but according to Genelec, bass perception from your listening position is also affected by room acoustics and speaker placement.

In Germany, who is responsible if a product is faulty: the seller or the manufacturer’s guarantee?

Statutory rights and a voluntary guarantee are separate entitlements; the seller is generally your point of contact for statutory rights. Under § 438 BGB, claims for defects on an ordinary purchase of goods generally become time-barred two years after delivery. Check the guarantee terms separately.

How should I dispose of an old electrical monitor controller in Germany?

Electrical and electronic waste must not go in household rubbish. The German Environment Agency lists local recycling centres and suitable take-back options at retailers; check in advance which collection point is available in your area.