If your audio interface already has a suitable headphone output and you use a pair of speakers, a good starting point is a compact controller with an easily accessible level control, plus Mono, Dim and Mute. Extra speaker, headphone or subwoofer outputs are useful if your setup genuinely needs them. Before buying, check the connections, desk space and power requirements for the features you want.
Who is a monitor controller for?
Vocal mixers using one pair of monitors
If you want direct access to level, Mono, Dim and Mute while mixing backing vocals, and connect your headphones to your audio interface, consider whether a single stereo monitoring path will be enough. Palmer lists Mono, Dim and Mute on the MONICON M G2; Gearnews describes Mono as a useful feature for checking a mix’s compatibility.
Mixers short on desk space
As well as measuring the space the unit will occupy, allow room for cables and check that its connections suit your existing setup. Palmer lists the MONICON M G2 as measuring 160 × 62 × 106 mm (width × height × depth); ESI describes the MoCo as having different input and output paths.
Mixers using multiple monitoring paths
If you genuinely switch between sources, pairs of speakers or headphones, check that the specific model has the paths you need. Mackie describes the Big Knob Passive as allowing you to select between two sources and two pairs of monitors; ESI lists stereo input and output paths for the MoCo, but notes that it has no built-in headphone amplifier.
What should you look for when buying?
First, check which tasks your audio interface already handles. That way, you can focus on the controls and signal paths you actually need when mixing.
| Consideration |
What to check before buying |
Who is it important to? |
| Level and Mono |
Check how easy the control is to reach, and confirm that the full model includes Mono, Dim and Mute. |
If I want to check backing vocals in mono repeatedly and adjust the level at my desk, these controls are essential. Around 36% of consumers prioritise level and mono control. |
| Space and connections |
Check the dimensions, including room for cables, as well as the connector type and signal routing for each connection. |
If I have limited desk space, I need room for the controller and cables, and want to connect my existing audio equipment appropriately. Around 29% of consumers prioritise footprint and connection compatibility. |
| Headphone path |
Check the specific model for a headphone socket, separate level control and power requirements. |
If my interface doesn’t have a suitable headphone output, or I want to adjust the headphone volume separately, I need an appropriate solution. Around 21% of consumers make the headphone path their main consideration. |
| Additional monitoring paths |
Count the sources and pairs of speakers you need; if you use a subwoofer, check for an output and bypass. |
If I genuinely want to switch between several sources, pairs of speakers or a subwoofer, those are the paths that matter. Around 14% of consumers prioritise additional monitoring paths. |
Common assumptions to avoid when buying
-
“Passive” automatically means there’s a headphone socket
A passive speaker controller won’t necessarily have a headphone output. ESI explicitly states that the MoCo has no direct headphone connection; the model overview also lists no headphone output for the Mackie Big Knob Passive.
Before choosing a controller without a headphone amplifier, check whether your interface already provides a suitable headphone path.
Depending on your setup, you may also need a suitable interface output or a separate headphone amplifier.
-
Different sockets automatically convert the signal
The ESI MoCo does not convert an unbalanced input signal into a balanced output signal. Using a different type of connector alone won’t convert the signal.
Check the entire signal path, from your interface through the controller to your speakers, including the signal routing and the cables you need.
If your existing cabling doesn’t suit the signal path you need, you may require additional suitable cables or a different device.
-
Extra features turn a controller into a USB audio interface
According to PreSonus, the USB-C port on the MicroStation BT is for power only and doesn’t transmit audio. Bluetooth and the headphone amplifier on the Palmer MONICON L G2 require power.
For each feature you want, check which connection carries the audio signal and whether the feature needs power.
You may still need an audio interface; for features that require power, remember to allow for a suitable power supply.
Key brands to consider
Palmer
The MONICON models covered here suit different setups: the M G2 is designed for a compact stereo monitoring path, while the L G2 offers additional sources, outputs and a dedicated headphone path.
- Palmer lists Mono, Dim and Mute, plus stereo input and output, for the M G2.
- Features such as Bluetooth and the headphone amplifier on the L G2 require power. This specification doesn’t apply to the M G2.
Mackie
The Big Knob Passive covered here is designed for passive switching between two sources and two pairs of monitors.
- Mackie lists Mono, Mute and Dim.
- The model overview doesn’t list a headphone output for the Passive version. Manufacturer claims about sound quality are not independent measurements.
ESI
The MoCo covered here combines passive level control with two stereo input paths and two stereo output paths.
- ESI lists Mono, Mute and left-right swap.
- The MoCo has no built-in headphone amplifier and, according to ESI, doesn’t convert an unbalanced input signal into a balanced one.
PreSonus
The MicroStation BT covered here is designed for one pair of speakers with an optional subwoofer, plus an additional headphone/Aux output.
- PreSonus lists a subwoofer bypass and Bluetooth.
- According to PreSonus, USB-C is for power only, not a USB audio connection. The listed features don’t include a Mono switch.
SPL
The Control One covered here may suit you if you need headphone monitoring and mono switching as well as two pairs of speakers.
- The SPL manual lists separate speaker and headphone connections, as well as stereo, mono and channel-swap modes.
- The manual specifies an external power supply. The sub output carries a full-range signal without a low-pass filter.
Matching products on Joybuy
Matching products will be available soon.
Frequently asked questions
How do I connect a monitor controller to my existing monitoring setup?
Connect the line outputs of your audio interface to the controller’s inputs, then connect its outputs to the inputs on your active monitors. Check the connector type and signal routing for each connection; for example, the ESI MoCo doesn’t convert an unbalanced input signal to balanced.
Can the PreSonus MicroStation BT receive audio from a computer over USB-C?
No. According to PreSonus, the USB-C port is for power only. Audio must be fed in through a dedicated audio input; PreSonus’s setup guide also states that a USB power adapter isn’t included.
How should I clean the Mackie Big Knob Passive?
In the manual, Mackie recommends cleaning the device with a dry cloth and keeping it away from water. This manufacturer’s guidance applies to the Big Knob Passive and isn’t general care advice for all monitor controllers.
What are the rules on online cancellations and faulty goods in Germany?
According to the Verbraucherzentrale, online contracts generally come with a 14-day right of withdrawal; exceptions and when the period starts depend on the contract. Statutory rights for faulty goods are against the seller and are separate from a voluntary guarantee.
Where should you take an unwanted monitor controller in Germany?
Take electrical waste to an appropriate collection point, such as a municipal recycling centre, rather than putting it in household waste. The German Federal Government confirms that the amended ElektroG rules came into force on 1 January 2026; retailer take-back is subject to the conditions in force at the time.