Who might need a monitor controller?

One pair of speakers on a small desk

If you mix on a pair of active speakers, an easy-to-reach volume control can be useful without taking up space with switching options you won’t use. Palmer describes the MONICON S G2 as having a stereo RCA path and a mono check.

Mono and reference monitoring

If you also check vocals and acoustic instruments in mono, or switch between sources and pairs of speakers, your model should support the connections you actually use. Mackie says the Big Knob Passive switches between two sources and two monitor pairs, and includes mono, mute and dim controls. ESI lists two stereo input and output paths, plus mono and mute, for the MoCo.

Quiet listening or an existing subwoofer

If you want to use headphones through the controller or check an existing subwoofer separately, make sure the feature you need is explicitly included. ESI says the MoCo doesn’t have a built-in headphone amplifier; PreSonus lists a headphone output and sub bypass for the MicroStation BT.

What should you look for when buying?

First, check whether your audio interface’s volume control is already easy to reach. If it isn’t, compare the connections and monitoring paths you need with those offered by the specific controller.

Buying priority What to check Who it matters most to
Volume control and desk space Check whether the device, including its cables, will fit on your desk and whether its connections suit your setup. Palmer lists the MONICON S G2 as measuring 86 × 39 × 66 mm, with a stereo RCA input and output. If you’re controlling a single pair of active speakers in a confined space, an easy-to-reach volume knob matters more than switching options you won’t use. Around 36% of consumers prioritise volume control and desk space.
Mono, mute and dim controls Check the controls on the specific model: Palmer lists mono on the MONICON S G2; Mackie lists mono, mute and dim on the Big Knob Passive. If you want to check vocals and instruments in your folk mix in mono with ease, a mono button you can reach quickly is essential. Around 29% of consumers name mono monitoring as their main priority.
Headphone or subwoofer path Check whether there’s a headphone output or sub bypass, and whether your interface already handles headphone monitoring. ESI notes that the MoCo doesn’t have a headphone amplifier; PreSonus lists a headphone output and sub bypass for the MicroStation BT. If you want to use headphones through the controller or check an existing subwoofer separately, look for that specific additional path. Around 21% of consumers put a headphone or subwoofer path first.
Switching between multiple paths Count the sources and pairs of speakers you actually want to connect, then check that the signal routing is suitable. ESI says the MoCo doesn’t convert an unbalanced input signal to a balanced one. If you regularly switch between multiple sources or pairs of speakers you already own for comparison, suitable switching can save you from swapping cables. Around 14% of consumers prioritise switching between multiple paths.

Avoiding common buying mistakes

  • Assuming a line output will work for headphones

    A line output isn’t automatically a substitute for a headphone amplifier. ESI makes it clear that you can’t connect headphones directly to the passive MoCo.

    Check whether your audio interface has a suitable headphone output or whether the controller you want is specifically designed for headphone use.

    If there’s no suitable output, you may need a separate headphone amplifier.

  • Assuming the right plug means the signal routing is right

    The plug type alone won’t tell you whether the signal routing suits your setup. ESI notes that the MoCo doesn’t convert an unbalanced input signal to balanced; Palmer lists unbalanced RCA paths for the MONICON S G2.

    Make a note of your interface’s outputs and your speakers’ inputs, then check the connector type and signal routing against the exact model.

    Depending on the connections you choose, you may need different cables. A cable on its own won’t convert the signal routing.

  • Paying for monitoring paths you won’t use

    Switching between pairs of speakers, Bluetooth and a subwoofer connection all serve different purposes. You don’t automatically need them to control a single stereo pair of speakers.

    Before you buy, count the sources, pairs of speakers and headphones you’ll actually connect, as well as any subwoofer you already have.

Brands and model ranges to consider

Palmer

The MONICON S G2 is a compact option with a stereo RCA path and mono monitoring.

  • Palmer says the MONICON S G2 is passive and doesn’t need a power supply.
  • The RCA connections limit the ways you can connect this model directly.

Mackie

The Big Knob Passive is designed for setups with two sources and two pairs of speakers, as well as mono, mute and dim controls.

  • These switching features may be useful when you move between paths you actually use.
  • The Big Knob Passive is different from the Big Knob Studio and Studio+, which have a different set of features.

ESI

ESI describes the MoCo as a passive controller with two stereo input and output paths, plus mono and mute buttons.

  • Its switching options may suit setups with several sources or speaker paths that you actually use.
  • According to ESI, the MoCo doesn’t convert unbalanced signals to balanced ones and doesn’t have a built-in headphone amplifier.

Behringer

The MONITOR1 is an option for a single speaker path if XLR/TRS connections and mono or mute controls suit your setup.

  • Behringer lists combo jacks or a 3.5 mm input, along with alternative output options.
  • According to the manufacturer, the combo jacks and 3.5 mm input can’t be used at the same time; the different output types are also alternatives to one another.

PreSonus

The MicroStation BT is designed for a listening position with a headphone output and, if needed, subwoofer functionality.

  • PreSonus lists a sub bypass, which lets you mute the subwoofer output separately.
  • According to PreSonus Support, USB-C is for power only and doesn’t turn the device into a USB audio interface.

Suitable products at Joybuy

Suitable products coming soon.

Frequently asked questions

Where do I connect a passive monitor controller?

Palmer says the MONICON S G2 sits between your audio interface and active speakers. Before buying, check that its RCA connections suit your interface’s outputs and your speakers’ inputs.

Can I connect headphones to an ESI MoCo line output?

No. ESI says the MoCo doesn’t have a built-in headphone amplifier, so you can’t connect headphones directly to it. If needed, use a suitable headphone output on your audio interface.

Does USB-C make the PreSonus MicroStation BT a USB audio interface?

No. According to PreSonus, the MicroStation BT’s USB-C connection is for power only and the device doesn’t appear as an audio device on your computer.

Does every monitor controller need the same CE marking?

No, there’s no blanket answer. According to the EU’s Your Europe website, CE marking is only required for products covered by harmonised EU rules that require it. EUR-Lex gives voltage ranges of 50 to 1,000 V AC and 75 to 1,500 V DC for the Low Voltage Directive; those figures alone don’t tell you which rules apply to every specific version of a device.