Loop editor with one pair of monitors
If space is tight and you want to adjust the monitoring level and switch to Mono, Dim or Mute right at your desk, a compact, easy-to-reach control is key.
You don’t need an extra monitor controller if your audio interface’s volume control is easy to reach and already offers all the monitoring routes and features you need. If it lacks dedicated Mono, Dim or Mute buttons, source switching or a suitable headphone output, choose a controller based on your specific needs and check its connections, footprint and cabling. Bonedo also notes that your existing interface control can be a suitable solution if it meets the needs of your workflow.
If space is tight and you want to adjust the monitoring level and switch to Mono, Dim or Mute right at your desk, a compact, easy-to-reach control is key.
If you genuinely switch between two sources or pairs of speakers, you’ll need the right inputs and outputs, plus a switch designed for the job.
If you want to connect headphones to the controller or switch an existing subwoofer separately, check that the specific model supports these routes.
First, check whether your interface’s control is easy to reach and suits your workflow. Only if a feature or switching option is missing is it worth choosing a separate device, based on its footprint, signal routes and the buttons you need.
| What you need | What to check before buying | Who is it important for? |
|---|---|---|
| Volume control when desk space is limited | Measure the available space, including room for the cables; check the control’s position and how easy it is to reach. | If I want to adjust the level while comparing loops at a small desk without losing workspace, an easy-to-reach control matters. Around 36% of consumers prioritise desk space and access to volume controls. |
| Mono, Dim and Mute | Check the exact model to see which buttons it has and whether your interface already offers these features. | If I want to check the stereo mix in Mono or turn my speakers down or mute them directly, the right buttons matter. Around 29% of consumers prioritise direct control. |
| Switching between multiple routes | Count the stereo inputs and separately selectable outputs you need; check the connection types and signal routing. | If I genuinely use multiple sources or pairs of speakers, I want to switch between them without unplugging anything. Around 21% of consumers prioritise switching between the routes they use. |
| Headphone or subwoofer route | Check for a dedicated headphone output or a separately controlled subwoofer route. | If I want to connect headphones to the controller or switch off my existing subwoofer while comparing, the relevant route needs to be available. Around 14% of consumers prioritise a headphone or subwoofer route. |
The number of stereo outputs and whether you can switch between them varies by model. Palmer lists one stereo output for the MONICON M G2, while Mackie specifies two monitor routes for the Big Knob Passive.
Map out the signal path from your interface to each pair of speakers, then check whether you can select the routes you need separately on the controller.
You may need additional compatible cables or a differently equipped device to use multiple routes.
A line output is no substitute for a dedicated headphone amplifier. ESI explicitly states that the MoCo cannot be used with headphones; by contrast, PreSonus lists a headphone/Aux output for the MicroStation BT.
Check the exact model’s headphone capabilities rather than judging by the shape of a socket.
If there’s no suitable headphone route, you may need a separate headphone amplifier or a different model.
According to the manufacturer, the ESI MoCo does not convert an unbalanced signal to a balanced one. The socket types alone don’t tell you how the signal is routed.
Check the inputs and outputs, including their connection types, across the entire signal path.
Depending on your setup, you may need different compatible cables or a device that suits your signal path.
The MONICON M G2 is designed for a single stereo monitoring route, while the MONICON L G2 offers a different set of features for additional routes.
The Big Knob Passive is designed for passive level control and switching between two sources and two pairs of monitors.
According to ESI, the MoCo has two stereo inputs and two stereo outputs that can be switched separately.
According to PreSonus, the MicroStation BT offers additional routes for Bluetooth playback, headphones/Aux and an existing subwoofer.
The MONITOR1 is described as a passive controller for one monitor route, with Mono and Mute.
Not necessarily. If your interface’s control is easy to reach and covers the monitoring routes and features you need, you can keep using it. It’s worth considering a separate controller if you’re missing direct controls or a suitable switching option; Bonedo also notes that your existing interface can be a possible solution.
Connect a compatible stereo output on your audio interface to the controller’s input, then connect its output to the inputs on your active speakers. Check the connection types on the specific model; ESI notes that the MoCo does not convert an unbalanced signal to a balanced one. Also follow the relevant instruction manual.
No. ESI rules out using headphones with the MoCo because it has no built-in headphone amplifier. Check whether the specific model has a dedicated headphone output, or use a suitable output on your existing audio interface.
The German Federal Network Agency lists correct CE marking, the ability to identify the product and manufacturer, and German-language instructions among the checks it makes when monitoring the market. According to the European Commission, CE marking is only required for products covered by EU harmonisation rules that require it. The rules that apply depend on the specific device; CE marking alone is not an independent quality mark.
Your statutory rights relating to faulty goods are against the seller; a voluntary guarantee is separate. If a product is faulty, the first remedy to consider is having it repaired or replaced. The Verbraucherzentrale explains that, since 31 July 2026, the statutory limitation period may be extended from two to three years if a repair is carried out instead of a replacement during the first two years.