Which monitor controller is right for you?

Producers with one pair of monitors

If you mainly want to adjust the level directly at your small desk and check your mix in mono, a single stereo monitoring path with easily accessible switches may be enough. Palmer lists Mono, Dim and Mute for the MONICON M G2.

Producers who compare monitoring options

If you actually switch between two stereo sources or two pairs of monitors while mixing, look for the right switching options and connections. Mackie and ESI specify this type of 2×2 routing for their respective models.

Producers with a subwoofer or headphones

If you want to switch off a subwoofer separately or mute your speakers when listening on headphones, check the signal path on the specific model. PreSonus describes a sub bypass and headphone/Aux output, while ESI notes that the passive MoCo cannot drive headphones.

What should you look for when buying?

Buying consideration What to look for Who is it important to?
Ease of use and desk space Measure the available space, including room for cable connections, and compare it with the manufacturer’s dimensions. Check whether a single stereo monitoring path will be enough. If you want to adjust the level directly in a tight space and use Mono, Dim or Mute without unplugging anything, compact controls should be your main priority. Around 36% of consumers put space-saving design and direct level control first.
Comparing sources or pairs of monitors Count stereo sources and pairs of speakers separately. Check that the TRS, XLR, RCA and mini-jack connections match your existing cables. If you really do switch between two sources or pairs of speakers while mixing, you need the right switching options, not just a large volume knob. Around 27% of consumers prioritise these comparison options.
Checking a subwoofer separately Check that the subwoofer is compatible with the connection and that the bypass really does mute only the sub output. Take room acoustics and speaker placement into account when assessing bass. If you want to switch an existing subwoofer on and off separately while mixing, you’ll need a suitable sub output and bypass. Around 19% of consumers put this check first.
Headphone output Check the headphone output, speaker mute and power supply on the exact model. Also consider whether your audio interface already provides the headphone output you need. If you sometimes mix on headphones and want to switch off your speakers while doing so, the controller must actually provide this signal path. Around 18% of consumers prioritise an integrated headphone output.

Monitor controller buying pitfalls

  • Assuming a passive speaker controller is a headphone amplifier

    According to ESI, the passive ESI MoCo cannot drive headphones. So a headphone socket on your interface isn’t automatically part of the controller’s signal path.

    Check the headphone path on the exact model and your audio interface before planning to add any other equipment.

    You may need a separate signal path or amplifier for headphones.

  • Assuming “2×2” means there’s a subwoofer output

    According to Mackie, 2×2 on the Big Knob Passive means two sources and two pairs of monitors. That’s not the same as a separately switchable sub output.

    Sketch out the stereo and sub signal paths you need, then compare them with the connection diagram for the specific model.

  • Assuming USB-C on the MicroStation BT is an audio input

    PreSonus describes USB-C on the MicroStation BT as a power connection, not a computer audio input. The manufacturer also says that a power adapter is not included.

    Plan the power supply and audio connection separately, and check the available TRS or Aux connections.

    You’ll need to plan for a separate power supply; USB-C doesn’t replace an audio connection to your computer.

  • Relying on a subwoofer switch for an accurate bass assessment

    Genelec points out that room acoustics and monitor placement affect what you hear. A sub bypass switches a signal path, but it won’t correct the room acoustics.

    Use the bypass to compare the sound, and also check your speaker placement and listening position.

Key brands at a glance

Palmer

The MONICON M G2 is designed as a compact passive stereo monitoring path.

  • Palmer lists Mono, Dim and Mute, along with balanced XLR/TRS and 3.5 mm connection options.
  • The model has one stereo input and output. Its sound neutrality is a manufacturer claim, not the result of an independent listening test.

Mackie

The Big Knob Passive is designed for switching between two stereo sources and two pairs of monitors.

  • Mackie lists Mono, Mute and Dim; according to the manufacturer, the Passive version has no active electronics in the signal path.
  • Headphone outputs listed on other Big Knob models aren’t included on the Passive version. Claims about sound and durability come from the manufacturer.

ESI

The MoCo is designed for passive 2×2 switching, with a range of analogue connection types.

  • ESI lists Mono, Mute and L/R swap.
  • According to ESI, the MoCo can’t drive headphones or convert unbalanced signals to balanced ones.

PreSonus

The MicroStation BT is designed for a stereo or 2.1 setup with a separately switchable subwoofer.

  • PreSonus lists a sub bypass, headphone/Aux output and Bluetooth.
  • According to PreSonus, USB-C is for power only, not as a computer audio input; a power adapter isn’t included.

Audient

The Nero is designed for setups that need multiple speaker, sub and headphone paths.

  • Audient lists three stereo speaker outputs, an assignable sub output and four headphone outputs.
  • Audient gives the Nero’s width as 255 mm and its depth as 155 mm. Compare these dimensions with the space available on your desk.

Related products on Joybuy

Related products will be available soon.

Frequently asked questions

Do I definitely need a monitor controller with a pair of active monitors?

No, not necessarily. What matters is whether your existing audio interface lacks an easily accessible level control or the Mono, Dim and Mute functions you want. A controller adds convenient controls and signal routing, not room correction.

How do I connect the MicroStation BT to my computer and speakers?

Send a suitable audio signal, for example from your audio interface, to the TRS inputs, then connect the main outputs to compatible active speakers or a power amplifier. According to PreSonus, USB-C only supplies power to the MicroStation BT; it doesn’t turn it into an audio interface. The manufacturer also says the power adapter isn’t included.

What should I check when mixing bass-heavy music at a small desk?

Compare playback from your usual listening position, both with and without a subwoofer if you have one. Genelec explains that the room and speaker placement affect the sound you hear, so a sub bypass doesn’t replace checking your setup.

What are your rights when shopping online in Germany?

For a distance purchase from a trader, you generally have 14 days from delivery to cancel; exceptions and rules on return costs apply. Your Europe, the European Union’s information portal, explains this time limit. Your statutory rights if goods are faulty are separate from any voluntary guarantee; under EU rules, the minimum guarantee period is two years from the date you receive the goods.

Where should you take an electronic monitor controller you no longer use?

According to Germany’s Federal Ministry for the Environment, old electrical and electronic equipment must be handed in at an authorised collection point, to a manufacturer or to a retailer. Whether a retailer is required to take it back depends on the conditions set out in the Electrical and Electronic Equipment Act.