Who is a monitor controller for?

Mixers short on desk space

If you already have an interface and speakers, you can control the volume and check your mix in mono right from a compact desk. Make sure there’s room for the plugs and cables, too.

Mixers with two monitoring setups

If you want to compare a jazz demo on two pairs of speakers or switch between sources, check which signal paths can actually be switched and what connections the specific model offers.

Mixers who use headphones

If you want to connect your headphones to the controller rather than the interface, you’ll need a dedicated headphone path, ideally with its own level control.

What should you look for when buying?

First, check which controls your interface already offers. Then see how the unit’s size and cable clearance, the switching options you need and any headphone connection will work with your specific mixing setup.

What matters What to check before buying Who should pay particular attention?
Space and volume control Unit dimensions, including cable clearance; whether the control is easy to reach where you plan to put it. If there’s barely any free space on your small desk, an easily accessible volume control that doesn’t take up unnecessary workspace is important. Around 36% of consumers say desk space and direct access to the volume control are their top concerns.
Mono and monitoring features Check the exact model for Mono, Dim and Mute functions, and whether your interface already offers them. If you want to quickly check your mix in mono, adjust the volume or mute the sound while mixing, look for these specific controls on the unit. Around 29% of consumers prioritise these monitoring features.
Connections and switching Check that the controller’s inputs and outputs match your interface and speakers; confirm how many sources and speaker pairs you can switch between. If you want to switch between existing sources or pairs of speakers, the connections and signal paths need to suit your setup. Around 21% of consumers put connecting and switching between multiple signal paths first.
Headphone path Check for a headphone amplifier, separate level control and suitable signal routing. If you want to connect headphones directly to the controller and adjust the volume there, you’ll need a dedicated headphone path. Around 14% of consumers prioritise this feature.

Common misconceptions

  • Assuming a speaker controller can also power headphones

    A passive monitor controller doesn’t automatically include a headphone output. ESI specifically states that the MoCo has no built-in headphone amplifier; Mackie’s model comparison lists no headphone outputs for the Big Knob Passive.

    If you want to connect headphones to the controller rather than the interface, check that the exact model has a dedicated headphone output and level control.

    If your interface doesn’t offer a suitable headphone path, you may need an additional device.

  • Looking only at the unit’s dimensions

    A compact unit doesn’t automatically mean less space is needed for the plugs, or that it will work with the connections you have, such as RCA, jack or XLR.

    Measure the space available, including cable clearance, and check that the sockets match your existing setup.

    You may need extra cables or a different place to put it.

  • Assuming all Big Knob models have the same features

    Mackie’s model comparison shows that the Big Knob Passive differs from the Studio models, including in its USB and headphone features.

    Check the full model name and the connections on the specific version before you plan to use it.

Brands and product ranges to consider

Palmer

The MONICON range offers options for a single stereo monitoring path, with a choice of connections and features.

  • Palmer says the MONICON S G2 measures 86 × 39 × 66 mm and has one stereo RCA input and output. The MONICON M G2 offers features including Mono, Dim and Mute, as well as XLR/TRS connection options, according to the manufacturer.
  • Both models are documented as having just one stereo input and output path. The manufacturer’s sound quality claims are not independent measurements.

Mackie

The Big Knob Passive is an option if you want to switch between sources or pairs of speakers.

  • Mackie’s documentation says the Big Knob Passive can switch between two sources and two pairs of speakers, and includes Mono, Mute and Dim.
  • Mackie’s model comparison lists no headphone outputs for the Passive. Features offered by other Big Knob models don’t automatically apply to this one.

ESI

The MoCo is a passive option with two stereo inputs and two stereo outputs, and a choice of connection types.

  • ESI lists balanced TRS and XLR connections, as well as unbalanced RCA and jack connections. Mono, Mute and channel swap are also documented features.
  • ESI points out that the MoCo doesn’t balance unbalanced signals and has no built-in headphone amplifier.

Drawmer

The CMC2 is worth considering if you want to switch between speakers and use a headphone path on the controller.

  • Drawmer documents two stereo monitor outputs, a subwoofer output and a headphone amplifier. The manufacturer gives its footprint as 18 × 16 cm.
  • Measure the available space, including room for connected cables. The manufacturer’s claims about sonic transparency have not been independently verified.

Audient

The Nero is designed for setups with multiple speaker and headphone paths.

  • Audient documents three stereo speaker outputs, an assignable subwoofer output and four headphone outputs with flexible routing.
  • If you only need one stereo monitoring path, the number of outputs may exceed what you need; the list of features alone doesn’t prove superior sound quality.

Suitable products on Joybuy

Suitable products coming soon.

Frequently asked questions

Do I really need a separate monitor controller?

Not necessarily. First, check whether your audio interface already gives you enough control over the volume, the switching you need and your headphone path. A separate controller is most useful if you’re missing one of these features or want to control it directly from your mixing position.

Can I connect headphones to any passive monitor controller?

No. ESI says the MoCo has no built-in headphone amplifier, while Drawmer documents a dedicated headphone amplifier for the CMC2. Before buying, check the exact model and whether the headphone path has separate level control.

What should I check before connecting everything?

Make sure your interface’s line outputs match the controller’s inputs, and that its outputs match your speakers’ inputs. ESI specifically points out that the MoCo doesn’t convert unbalanced signals to balanced ones. Choose your cables based on the actual sockets and signal paths.