Mixers with one pair of speakers
If you mix at a small desk and want to adjust the level directly or occasionally check your mix in mono, first see whether your audio interface already offers these functions in an easy-to-reach position.
If your audio interface already gives you convenient control over the volume and the monitor outputs you need, you don’t necessarily need an additional monitor controller. For one pair of speakers, a passive controller with the right connections and the mono, dim or mute functions you want may be enough. More speakers, a dedicated headphone output or a subwoofer require the relevant features on the specific model. A controller won’t correct speaker placement or room acoustics, as Genelec explains in its guide to monitor placement.
If you mix at a small desk and want to adjust the level directly or occasionally check your mix in mono, first see whether your audio interface already offers these functions in an easy-to-reach position.
If you actually switch between pairs of speakers or stereo sources, look for clearly specified switches and suitable connections for the signal paths you use.
If you want to control more than just speaker volume, check whether the specific model has a headphone output or a switchable subwoofer output.
First, compare the features of your interface with the signal path you actually want to control at your small mixing setup.
| Priority | What to check when buying | Who is it important to? |
|---|---|---|
| Level, mono and mute | Check which buttons are listed for the exact model: Palmer lists mono, dim and mute for the MONICON M G2; Behringer lists mono and mute for the MONITOR1. | If I want to adjust the level directly at my desk while mixing folk and check the stereo mix in mono, quick access matters to me. Around 36% of consumers are likely to prioritise level, mono or mute controls. |
| Space and connections | Check the sockets on your interface and active monitors, and leave room for the plugs. Palmer lists the MONICON M G2 as 160 mm wide and 106 mm deep. | If space is tight on my desk, the unit and its plugs need to fit my setup. Around 29% of consumers are likely to prioritise the space required and suitable connections. |
| Switching between sources or speakers | Count the stereo sources and pairs of speakers you need separately. Mackie describes the Big Knob Passive as handling two sources and two monitor pairs; ESI lists two stereo inputs and two stereo outputs for the MoCo. | If my workflow means I genuinely need to switch between sources or speaker pairs, I want the right switches rather than having to keep unplugging and reconnecting things. Around 21% of consumers are likely to make this their main priority. |
| Headphones or subwoofer | Check whether the model specifies a dedicated headphone output with level control or a subwoofer bypass. Palmer lists a separately controlled headphone output for the MONICON L G2; PreSonus lists a headphone/Aux output and sub bypass for the MicroStation BT. | If I need a dedicated headphone output or a switchable subwoofer, a large volume knob on its own won’t be enough. Around 14% of consumers are likely to prioritise one of these additional signal paths. |
A passive controller doesn’t automatically include a headphone amplifier. ESI explicitly states that you can’t connect headphones to the MoCo because it has no built-in headphone amplifier.
First, check the headphone output on your interface. If you want the controller to handle this, its headphone function must be clearly specified.
Depending on the connections you already have, you may need different cabling or signal routing.
PreSonus states that USB-C on this model is for power only and doesn’t provide a USB audio interface.
Check the power supply and analogue audio cabling separately. PreSonus says you’ll need a USB mains adaptor for power, which isn’t included.
Remember to budget separately for the USB mains adaptor you need.
According to Genelec, room acoustics and speaker placement affect what you hear. Volume control or switching a subwoofer on and off won’t eliminate these effects.
Assess speaker placement and your listening position separately from the switching functions you need on your controller.
The MONICON models cater for different requirements in terms of inputs, outputs and headphone control.
The Big Knob Passive is designed for users who want to switch between two sources and two pairs of speakers.
The MoCo is a passive switcher with two stereo input paths and two stereo output paths.
The MONITOR1 provides a passive speaker-level control path with direct access to mono and mute.
The MicroStation BT is aimed at setups that need a headphone/Aux output, sub bypass or Bluetooth audio streaming.
Connect the analogue output of your audio interface to a suitable input on the controller, then connect its speaker output to the inputs on your active monitors. Check the connections on the specific model; ESI points out that the MoCo doesn’t make an unbalanced input signal balanced.
No, not every passive monitor controller supports this. ESI explicitly rules out connecting headphones to the MoCo because it has no built-in headphone amplifier. If your interface doesn’t offer a suitable headphone output, check whether the model you’re considering has a specified headphone output and appropriate level control.
No. According to PreSonus, USB-C on this model is for power only; you’ll need a dedicated audio input for audio. PreSonus says a USB mains adaptor isn’t included.
If a product is faulty, your statutory rights to a remedy are against the seller; these are separate from any voluntary guarantee. For a typical online purchase from a business seller, you generally have a 14-day right to cancel, although exceptions and the terms of the specific purchase should be checked. The Verbraucherzentrale explains the difference.