For a small stereo setup, a basic passive monitor controller may be all you need if your main priorities are adjusting the level and checking mono or mute. If you also need a dedicated headphone output, talkback or several monitoring paths, check the connections and desk space carefully. First, establish whether your theatre project requires stereo or discrete multichannel audio: Bonedo distinguishes between stereo controllers and devices with surround capabilities.
Who is a monitor controller for?
Stereo mixers with limited desk space
If you want to adjust the level quickly and check mono or mute on a small desk, consider the controls, the space the unit takes up and room for cables at the back together. ESI lists the MoCo as measuring around 164 × 130 × 55 mm.
Mixers who use reference monitors
If you switch between sources, pairs of speakers or an existing 2.1 monitoring setup, count the signal paths you need separately. Mackie lists two sources and two monitor pairs for the Big Knob Passive; PreSonus describes a subwoofer bypass on the MicroStation BT.
Teams using headphone cues
Palmer lists the MONICON L G2 as having a separately controlled headphone output. If several people need their own headphone outputs and talkback, Audient lists four headphone outputs and assignable talkback for the Nero.
What should you look for?
When mixing a theatre soundtrack, decide on the output format first: a stereo controller and a discrete multichannel monitoring path serve different purposes.
| What matters |
What to check before buying |
Who will find this most important? |
| Easy controls and desk space |
Overall footprint, including plugs, and whether the unit has the mono, mute and, where needed, dim functions you want. |
If I want to reach the level control quickly and check my monitoring without fuss on a small desk, I look for compact dimensions and the controls I need. Around 36% of consumers put easy access to controls first when space is limited. |
| Switching between sources and speakers |
Check the stereo inputs and outputs you need, as well as whether there is a subwoofer bypass. |
If you want to switch between suitable sources, pairs of monitors or an existing 2.1 setup, check that the controller supports those exact paths. Around 29% of consumers prioritise switching between monitoring paths. |
| Headphones and cues |
Check the number of headphone outputs, independent level controls and talkback routing on the specific model. |
If I need to monitor on headphones alone or with other people, I need the right number of independently usable outputs. Around 21% of consumers put headphones and cues first. |
| Stereo or multichannel |
Establish the project format and the number of independently controlled outputs across the entire signal path. |
For a theatre project with discrete channels, I want to make sure each channel I need can be routed separately. Around 14% of consumers prioritise discrete multichannel routing. |
Monitor controller buying pitfalls
-
Confusing “2×2” with multichannel audio or two headphone outputs
For the Mackie Big Knob Passive, Mackie says that 2×2 means two sources and two monitor pairs; the model comparison does not list a headphone output.
List your project channels, stereo sources, monitor pairs and headphone connections separately before comparing models.
If your project needs discrete multichannel outputs, you may need an additional monitoring path designed for that purpose.
-
Assuming passive means every type of connection and headphone feature is included
ESI points out that the MoCo does not balance unbalanced input signals. A passive signal path therefore does not automatically mean that a particular connection format or headphone output is available.
Check the connections on the specific model and trace the signal path from your interface to your speakers.
Depending on your existing cabling, you may need a suitable cable connection or a separate headphone output.
-
Assuming a sub output provides full bass management
According to the manual, the SPL Control One’s sub output is not low-pass filtered. So having a dedicated output does not mean the controller will provide the bass management you need.
Check that the output is compatible with the input and settings of the subwoofer you plan to use.
You may need to make further adjustments to your subwoofer setup.
Key brands at a glance
Mackie
The Big Knob Passive is designed for a straightforward passive stereo monitoring setup with two sources and two monitor pairs.
- Mackie lists mono, mute and dim functions.
- The model comparison does not list a headphone output for the Passive version; details of other Big Knob versions do not automatically apply to this model.
ESI
The MoCo is a compact passive stereo controller with two input and two output paths.
- ESI lists mono, mute, L/R swap and dimensions of around 164 × 130 × 55 mm.
- ESI explicitly states that unbalanced input signals are not balanced.
Palmer
The MONICON L G2 is aimed at stereo monitoring setups that need additional sources and a separately controlled headphone output.
- Palmer lists two stereo outputs and one mono output, plus mono, dim and mute functions and a separate headphone level control.
- The additional Bluetooth and headphone features mean the unit as a whole should not be considered fully passive.
PreSonus
The MicroStation BT may suit a stereo monitoring setup with an existing compatible subwoofer and a sub bypass function.
- PreSonus lists balanced TRS inputs, a headphone/aux output and sub bypass.
- These details do not confirm that it can switch between two complete stereo monitor pairs.
Audient
The Nero is designed for more complex stereo monitoring setups with multiple headphone cues and talkback.
- Audient lists three stereo speaker paths, four headphone outputs and assignable talkback.
- The manufacturer’s dimensions of 255 × 75 × 155 mm should be checked against the available desk space if you have a small desk.
Suitable products on Joybuy
Related products coming soon.
Frequently asked questions
How do I connect a monitor controller without mixing up the signal paths?
Connect the interface outputs to the controller inputs, then connect the controller outputs to the appropriate speakers. Check the connectors and whether the signal path is balanced or unbalanced; ESI points out that the MoCo does not balance an unbalanced signal.
Can I use a sub output to monitor a surround mix?
No. A sub output alone does not provide a discrete multichannel monitoring path. PreSonus describes the MicroStation BT as having sub bypass for a 2.1 monitoring setup; according to the manual, the SPL Control One’s sub output is not low-pass filtered.
What should I bear in mind when using and cleaning it?
Set speaker and headphone levels low before switching on for the first time or changing settings. For the Big Knob Passive, Mackie’s instructions recommend cleaning with a dry cloth and warn against water and sources of heat.