Who is a monitor controller for?

Solo vocal mixers

You want to check backing vocals in mono quickly and turn down or mute your monitors from your desk. You don’t need extra cue mixes.

Mixers using two monitor setups

You switch between existing speaker pairs or signal sources to assess your mix. You’ll need to choose connections and switching options that suit your setup.

Recording engineers using headphone cues

You mix while also managing vocal recordings. Separately controlled headphone outputs and, when the recording space is separate, talkback may be important for you.

What should you look for when choosing one?

First, consider whether you mix on your own or need to provide monitoring for other people during a recording session. Then choose the routing options you need and decide whether your headphones will stay connected to your interface or plug directly into the controller.

What you need What to check before buying Who will find this most important?
Quick mono and level control Check whether mono, mute and dim are available as separate functions; a volume control doesn’t automatically offer all three. If you want to check layered backing vocals in mono while mixing, and turn the level down or mute it without changing your DAW settings, direct access matters. Around 36% of buyers prioritise mono and level control.
Sources, monitoring and connections Count your sources and speaker pairs separately, then check the connector types and whether the signal paths are balanced or unbalanced. If you want to switch between existing sources or speaker pairs, the inputs and outputs must suit your setup. More routing options also mean more cabling. Around 29% of buyers prioritise suitable connections and the ability to switch between monitors.
Headphones connected directly to the controller Look for a headphone output specifically listed in the product details, and check whether its level can be controlled separately. If you want to plug your headphones into the controller rather than the audio interface and control the level there, a built-in headphone amplifier is essential. Around 21% of buyers prioritise a direct headphone output.
Cue mixes and talkback Check the number of headphone outputs, whether their levels can be controlled, how their signal sources are selected and how the talkback signal is routed. If several people need to hear different signals during a vocal recording or speak to the control room, you’ll need suitable cue mixes and, if necessary, talkback. Around 14% of buyers focus primarily on these requirements.

Common buying misconceptions

  • “2×2” means two headphone connections

    On the Mackie Big Knob Passive, 2×2 refers to switching between two sources and two monitor pairs. Mackie’s specifications for this version don’t list a headphone output.

    Check the speaker and headphone outputs separately in the model specifications.

    If you want to connect headphones directly to the controller, you may need an additional headphone amplifier.

  • XLR sockets don’t automatically mean balanced connections

    ESI explicitly states that the MoCo doesn’t convert unbalanced input signals to balanced ones.

    Check the entire signal path from your audio interface to your speakers, and compare it with the specifications for the specific controller.

    If your signal path needs different connections, you may need different cables or an additional device.

  • You don’t need multiple cue mixes and talkback for every session

    The PreSonus Monitor Station V2 offers several headphone outputs and talkback. If you’re mixing on your own, these extra features may go beyond what you actually need.

    Before choosing a model, note how many people will be listening at once, whether they need different signals and whether talkback is necessary.

A look at the key brands

Palmer

The MONICON range includes models for one stereo monitor path, as well as versions with additional outputs and a separately controlled headphone output.

  • Palmer describes the MONICON M G2 as passive, with mono, dim and mute functions.
  • The M G2 doesn’t switch between two stereo speaker pairs. The headphone amplifier and Bluetooth on the MONICON L G2 require power.

Mackie

The Big Knob Passive is designed for setups where you need to switch between two sources or two monitor pairs.

  • Mackie lists 2×2 switching, along with mono, mute and dim, for this passive model.
  • Mackie’s specifications don’t list a headphone output for the Big Knob Passive. Features of other versions aren’t automatically included.

ESI

According to ESI, the MoCo combines two stereo inputs and two stereo outputs with features such as mono, mute and L/R swap.

  • ESI describes the MoCo as passive and lists two stereo inputs and outputs.
  • ESI notes that the MoCo doesn’t balance unbalanced signals and doesn’t have a built-in headphone amplifier.

Drawmer

The CMC2 combines two stereo monitor paths with a separately switchable subwoofer path and a headphone connection.

  • Drawmer lists a headphone amplifier with its own level control, as well as mono, dim, mute and phase inversion, for the CMC2.
  • Check whether you can make practical use of the additional headphone and subwoofer paths in your setup.

PreSonus

The Monitor Station V2 is designed for more extensive recording and mixing setups, with multiple speaker and headphone paths.

  • PreSonus lists four headphone outputs with individual level controls and Main/Cue selection, as well as talkback.
  • If you only need one solo monitoring path, weigh the extra cabling and features against how you’ll actually use the unit.

Joybuy products

Related products coming soon.

Frequently asked questions

How do I connect the controller to my existing setup?

First, check the line outputs on your audio interface and the inputs on your active speakers. Put the controller in between as a volume control and, if needed, a switching point. Check the connector types and whether the signal path is balanced or unbalanced against the specifications for the specific model. ESI notes that the MoCo doesn’t balance unbalanced signals.

Does a monitor controller replace my audio interface or automatically improve my recordings?

No. The passive models described here control monitoring levels and signal paths; they don’t automatically replace your audio interface. Extra monitoring features can make certain listening comparisons easier, but they don’t guarantee a better vocal recording or mean you no longer need an interface.

What should I check after setting up and while using the controller?

Test each source, speaker and headphone path you need, starting at a low monitoring level. Then check mono, mute and dim, and, if you’re using multiple speaker pairs, make sure their levels are matched. PreSonus lists separate speaker level controls for the Monitor Station V2; always follow the connection and care instructions for your specific device.

What should I know about headphones and consumer rights in Germany?

Check whether your chosen controller has a headphone amplifier; if not, you may need a separate device to connect your headphones directly. When buying as a consumer, distinguish your statutory rights against the seller from any voluntary guarantee. The Verbraucherzentrale explains that, if a product is faulty, the first step is for the seller to put things right, for example by repairing or replacing it, and the seller covers the associated costs.

What are the rules on product marking and disposal in Germany?

CE marking is only required if the relevant harmonised EU rules call for it on the specific product; it isn’t an independent quality mark. The European Commission explains this requirement. In Germany, electrical and electronic waste must be disposed of separately from household waste. The Umweltbundesamt outlines the framework set out in the Electrical and Electronic Equipment Act.